Laying 24x10 fitment

[fastonthetrack]

Hey guys I am going to order some 24X10 wheels running s 255/30/24 (30.2" tall) I have a porterbuilt dropmember and ART control arms for a 73+ C10 im puting on my 72 suburban.

My question if for the guys running 24s or know someone with a successful setup. What offset/backspacing are you guys running

[Jparks]

You are running 24x10 up front?
Posted via Mobile Device

[fastonthetrack]

Thats the plan, havnt been able to find a 24x9.5 that i like.

[fastonthetrack]

Well actually thats not true, i would like to run 24x9 if possible

[Jparks]

If I'm not mistaken you have to run narrowed control arms to make it work and you're not going to be able to just buy any off the shelf brand of wheels, pretty sure you'll have to get some custom made so you can get the correct backspacing, custom wheels should come in any size and width you want, message Nate to double check my info though, i'm definitely not the expert
Posted via Mobile Device

[lolife99]

I think you better talk to Nate about fitting a 10" wide rim up front.
It's going to take a tone of backspacing.
(i.e. expensive custom wheel).

All the major wheel companies should be able to make you a 24x8.5 wheel.