VA Gauge parts, tins, circuits, lenses, etc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 02-10-2012, 04:26 AM

I have a huge collection of gauge parts that are taking over my house so I need to lighten the load a little

Besides all my tach dashes I have several other full gauge setups.

Nice original non-tach printed circuits for trucks with gauges. 45 each shipped in conus or 150 shipped for all 4.

full gauge setup with air pressure including inner tin, outer tin, and lens 70 shipped

full gauge setup with vacuum including inner tin, outer tin, and lens 85 shipped. Super nice tins on this one!

Will likely be selling my misc gauges and parts too but have to get most of my tach dashes finished to make sure I have all the parts needed...

**DaHos** · 02-10-2012, 10:53 AM

Keep me in mind still looking for items I PM'ed you about, Also the 66/67 (67 correct)gauge style non-tach printed circuits PIC 1 and 3. Need the nicer of the 2 (No layer separation ?).

FYI dont use a air compressor to blow dust off them , they will split apart in a second !!!!!!

PS: All set on the Manifolds.

VA72C10 · 02-10-2012, 07:21 PM

No separation on any of these...these are my nicest 4...I have about 20 of them

I wipe them down with a damp paper towel...find this is safe and effective...

I'll hold one for you...let me know what all you decide you want. Thanks

71Sleeper · 02-10-2012, 07:24 PM

Hey you got my tach circuit and hei tach harness ready?

VA72C10 · 02-10-2012, 07:31 PM

sure do....I have one of each set aside for you.

I'm hoping to have some time tomorrow to look for the heater plug piece in my box-o-electrical parts

Figured I'd ship them all together.

**DaHos** · 02-10-2012, 07:41 PM

VERY NICE to NOS Gauges -

67 correct gauge circuit
Amp 1503428
Temp 6402533
Vacuum 6460663
60lb oil 6460746
Tach Face.

I should be set on the speedo and fuel gauges, other than my needles needing paint the face is still nice and green.

**DaHos** · 02-10-2012, 07:51 PM

Also interested in partial trade? Here is what Im working with.

4xshort · 02-10-2012, 10:58 PM

Do you have any tach/vac parts kicking around? Would the vac tins you have here work with a Tach?

VA72C10 · 02-11-2012, 12:31 AM

Quote:

Originally Posted by 4xshort

Do you have any tach/vac parts kicking around? Would the vac tins you have here work with a Tach?

This tin is for a full gauge set w/out a tach. I do have one tach/vac tin I've considered selling but haven't made my mind up yet.

VA72C10 · 02-11-2012, 12:47 AM

Quote:

Originally Posted by DaHos

VERY NICE to NOS Gauges -

67 correct gauge circuit
Amp 1503428
Temp 6402533
Vacuum 6460663
60lb oil 6460746
Tach Face.

I should be set on the speedo and fuel gauges, other than my needles needing paint the face is still nice and green.

Quote:

Originally Posted by DaHos

Also interested in partial trade? Here is what Im working with.

I have NOS oil and amp gauges.

4xshort · 02-11-2012, 11:14 AM

Keep me in mind if you decide to sell your tach/vac tins, I would also like some factory gauges with it, tach, vac and 80lb.

VA72C10 · 02-22-2012, 05:36 AM

ttt

kriswvu1202 · 02-23-2012, 08:07 PM

I'll take one of the circuit boards if you still have any left. PM me.

VA72C10 · 02-23-2012, 11:44 PM

Quote:

Originally Posted by kriswvu1202

I'll take one of the circuit boards if you still have any left. PM me.

pm sent

02-10-2012, 04:26 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Gauge parts, tins, circuits, lenses, etc I have a huge collection of gauge parts that are taking over my house so I need to lighten the load a little Besides all my tach dashes I have several other full gauge setups. Nice original non-tach printed circuits for trucks with gauges. 45 each shipped in conus or 150 shipped for all 4. full gauge setup with air pressure including inner tin, outer tin, and lens 70 shipped full gauge setup with vacuum including inner tin, outer tin, and lens 85 shipped. Super nice tins on this one! Will likely be selling my misc gauges and parts too but have to get most of my tach dashes finished to make sure I have all the parts needed... __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-10-2012, 10:53 AM	#2
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,855	Re: Gauge parts, tins, circuits, lenses, etc Keep me in mind still looking for items I PM'ed you about, Also the 66/67 (67 correct)gauge style non-tach printed circuits PIC 1 and 3. Need the nicer of the 2 (No layer separation ?). FYI dont use a air compressor to blow dust off them , they will split apart in a second !!!!!! PS: All set on the Manifolds. __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-10-2012, 07:21 PM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Gauge parts, tins, circuits, lenses, etc No separation on any of these...these are my nicest 4...I have about 20 of them I wipe them down with a damp paper towel...find this is safe and effective... I'll hold one for you...let me know what all you decide you want. Thanks __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-10-2012, 07:24 PM	#4
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: Gauge parts, tins, circuits, lenses, etc Hey you got my tach circuit and hei tach harness ready? __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

02-10-2012, 07:31 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Gauge parts, tins, circuits, lenses, etc sure do....I have one of each set aside for you. I'm hoping to have some time tomorrow to look for the heater plug piece in my box-o-electrical parts Figured I'd ship them all together. __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-10-2012, 07:41 PM	#6
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,855	Re: Gauge parts, tins, circuits, lenses, etc VERY NICE to NOS Gauges - 67 correct gauge circuit Amp 1503428 Temp 6402533 Vacuum 6460663 60lb oil 6460746 Tach Face. I should be set on the speedo and fuel gauges, other than my needles needing paint the face is still nice and green. __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-10-2012, 07:51 PM	#7
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,855	Re: Gauge parts, tins, circuits, lenses, etc Also interested in partial trade? Here is what Im working with. Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-10-2012, 10:58 PM	#8
4xshort Registered User Join Date: Jan 2012 Location: Waseca Saskatchewan, Canada Posts: 276	Re: Gauge parts, tins, circuits, lenses, etc Do you have any tach/vac parts kicking around? Would the vac tins you have here work with a Tach?

02-11-2012, 11:14 AM	#11
4xshort Registered User Join Date: Jan 2012 Location: Waseca Saskatchewan, Canada Posts: 276	Re: Gauge parts, tins, circuits, lenses, etc Keep me in mind if you decide to sell your tach/vac tins, I would also like some factory gauges with it, tach, vac and 80lb.

02-22-2012, 05:36 AM	#12
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Gauge parts, tins, circuits, lenses, etc ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-23-2012, 08:07 PM	#13
kriswvu1202 Registered User Join Date: Sep 2011 Location: Morgantown, WV Posts: 111	Re: Gauge parts, tins, circuits, lenses, etc I'll take one of the circuit boards if you still have any left. PM me.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.