IN Tilt Column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 02-19-2012, 10:39 PM

This was installed from van by previous owner in truck and it is in excellent full function and working order. INCLUDES Collapsed intermediate. Very smooth operation. Original hazard knob, very nice chrome levers, and was repainted from dash to match dark blue paint of truck.

This thing will bolt right in a truck. The intermediate has been collapsed by P.O. to compensate for longer van steering shaft. VERY CLEAN!

It looks to have been restored previously because the grommets and retainer were spliced. No guarantee it was though. Comes with new pointer and neutral safety switch. If interested I will throw in a truck conversion wiring plug. If it does not sale as is I will disassemble and restore another.

[B]$250 shipped CONUS[/B

I must stress that this tilt operates super smooth. Very nice tilt action and such.

HeavyMetalChevy · 02-19-2012, 10:43 PM

pics

HeavyMetalChevy · 02-20-2012, 02:06 PM

ttt

HeavyMetalChevy · 02-21-2012, 10:37 PM

ttt

HeavyMetalChevy · 02-22-2012, 09:01 PM

ttt for offers?

HeavyMetalChevy · 02-22-2012, 11:53 PM

ttt

**72peace** · 02-24-2012, 11:08 AM

So, is this everything I need to swap into my 72? Or, are additional parts required?

Cheers,

HeavyMetalChevy · 02-24-2012, 09:01 PM

Quote:

Originally Posted by 72peace

So, is this everything I need to swap into my 72? Or, are additional parts required?

Cheers,

It is everything minus a plug converter which runs about $15 shipped. For the wiring harness which come from the column and plugs in. It is typically c-shaped. Check your truck and see if that is what you need. Just follow your wiring harness will be on far driver side underdash.

Duane

**72peace** · 02-27-2012, 11:12 AM

Was there anything you wanted to swap for it?

Cheers,

HeavyMetalChevy · 02-27-2012, 11:50 AM

Quote:

Originally Posted by 72peace

Was there anything you wanted to swap for it?

Cheers,

was waiting on the pics to my email of potential trades. remimartin257@aol.com

**72peace** · 02-27-2012, 12:05 PM

I sent them right after I talked to you, I'll try sending them again this evening when I get home. Or, if you prefer I can post them here somewhere.

Sorry they didn't come through,

HeavyMetalChevy · 02-27-2012, 01:11 PM

Quote:

Originally Posted by 72peace

I sent them right after I talked to you, I'll try sending them again this evening when I get home. Or, if you prefer I can post them here somewhere.

Sorry they didn't come through,

I found them in my spam folder.. lol Did not see full pics of panels though. I will sort through them and give you a call later. Thanks!

**72peace** · 02-27-2012, 02:32 PM

Here's a few of the donor truck that I have with me, almost everything is available:

HeavyMetalChevy · 03-02-2012, 11:24 AM

Quote:

Originally Posted by 72peace

Here's a few of the donor truck that I have with me, almost everything is available:

I still have a couple more. One if yours eventually buddy!

BennettGM · 03-02-2012, 11:37 AM

That looked like a smokin tilt column.....any more where that came from?
Looking for something for my 72 Suburban.

HeavyMetalChevy · 03-02-2012, 12:17 PM

Quote:

Originally Posted by BennettGM

That looked like a smokin tilt column.....any more where that came from?
Looking for something for my 72 Suburban.

I offer COMPLETELY restored tilt columns. They are modified van columns made to bolt right into a 67-72 truck. They are completely overhauled, sand blasted, degreased, then re-shot with paint and all contact points and bearings lubed with lithium grease. Here is my link. These will bolt right in our trucks without any modifications when done. $325-$350 shipped depending on parts refurbished.

http://67-72chevytrucks.com/vboard/s...d.php?t=501499

**72peace** · 02-29-2012, 12:37 PM

Ttt

bbobb · 03-01-2012, 10:03 PM

Would you take 225.00 shipped

HeavyMetalChevy · 03-02-2012, 12:05 AM

I would go $231.75 shipped..

bbobb · 03-02-2012, 10:37 AM

I see your pay pal address on your thread. Money is on the way right now....thanks

HeavyMetalChevy · 03-02-2012, 11:24 AM

Quote:

Originally Posted by bbobb

I see your pay pal address on your thread. Money is on the way right now....thanks

Got you sir.. This is a really great column!!!

bbobb · 03-02-2012, 12:57 PM

If the offer still stands to throw in the conversion plug for a truck i would appreciate it

205harleyman · 03-26-2012, 12:53 AM

I am interested, will you maint one corvette madrid red?

Thanks, Tim

HeavyMetalChevy · 03-26-2012, 03:15 AM

Quote:

Originally Posted by 205harleyman

I am interested, will you maint one corvette madrid red?

Thanks, Tim

YOU MUST HAVE drank as much water as i have.. give me

paint code.

205harleyman · 03-26-2012, 10:46 AM

I will get it for you.

thanks, Tim

02-19-2012, 10:39 PM	#1
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Tilt Column This was installed from van by previous owner in truck and it is in excellent full function and working order. INCLUDES Collapsed intermediate. Very smooth operation. Original hazard knob, very nice chrome levers, and was repainted from dash to match dark blue paint of truck. This thing will bolt right in a truck. The intermediate has been collapsed by P.O. to compensate for longer van steering shaft. VERY CLEAN! It looks to have been restored previously because the grommets and retainer were spliced. No guarantee it was though. Comes with new pointer and neutral safety switch. If interested I will throw in a truck conversion wiring plug. If it does not sale as is I will disassemble and restore another. [B]$250 shipped CONUS[/B I must stress that this tilt operates super smooth. Very nice tilt action and such. Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 02-19-2012 at 10:44 PM.

02-19-2012, 10:43 PM	#2
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Tilt Column pics Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

02-20-2012, 02:06 PM	#3
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Tilt Column ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

02-21-2012, 10:37 PM	#4
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Tilt Column ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

02-22-2012, 09:01 PM	#5
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Tilt Column ttt for offers? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

02-22-2012, 11:53 PM	#6
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Tilt Column ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

02-24-2012, 11:08 AM	#7
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: Tilt Column So, is this everything I need to swap into my 72? Or, are additional parts required? Cheers,

02-27-2012, 11:12 AM	#9
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: Tilt Column Was there anything you wanted to swap for it? Cheers,

02-27-2012, 12:05 PM	#11
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: Tilt Column I sent them right after I talked to you, I'll try sending them again this evening when I get home. Or, if you prefer I can post them here somewhere. Sorry they didn't come through,

02-27-2012, 02:32 PM	#13
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: Tilt Column Here's a few of the donor truck that I have with me, almost everything is available: Attached Images Last edited by 72peace; 02-29-2012 at 12:36 PM.

03-02-2012, 11:37 AM	#15
BennettGM Registered User Join Date: Feb 2012 Location: Cambridge Ontario Posts: 58	Re: Tilt Column That looked like a smokin tilt column.....any more where that came from? Looking for something for my 72 Suburban. __________________ 72 Suburban 3/4 ton 4X4

02-29-2012, 12:37 PM	#17
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: Tilt Column Ttt

03-01-2012, 10:03 PM	#18
bbobb Registered User Join Date: Oct 2011 Location: El Lago Tx Posts: 95	Re: Tilt Column Would you take 225.00 shipped

03-02-2012, 12:05 AM	#19
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Tilt Column I would go $231.75 shipped.. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

03-02-2012, 10:37 AM	#20
bbobb Registered User Join Date: Oct 2011 Location: El Lago Tx Posts: 95	Re: Tilt Column I see your pay pal address on your thread. Money is on the way right now....thanks



Register or Log In To remove these advertisements.

03-02-2012, 12:57 PM	#22
bbobb Registered User Join Date: Oct 2011 Location: El Lago Tx Posts: 95	Re: Tilt Column If the offer still stands to throw in the conversion plug for a truck i would appreciate it

03-26-2012, 12:53 AM	#23
205harleyman Registered User Join Date: May 2011 Location: birmingham, al Posts: 209	Re: Tilt Column I am interested, will you maint one corvette madrid red? Thanks, Tim __________________ 205harleyman 1972 K5 Blazer 2002 5.3 ltr engine and transmission Vintage Air 1999 tan leather bucket seats and console w/1999 back seat 20inch Torque Thrust Wheels Corvette Madrid Red with Tan Top Hope to be driving soon!!!

03-26-2012, 10:46 AM	#25
205harleyman Registered User Join Date: May 2011 Location: birmingham, al Posts: 209	Re: Tilt Column I will get it for you. thanks, Tim __________________ 205harleyman 1972 K5 Blazer 2002 5.3 ltr engine and transmission Vintage Air 1999 tan leather bucket seats and console w/1999 back seat 20inch Torque Thrust Wheels Corvette Madrid Red with Tan Top Hope to be driving soon!!!

Register or Log In To remove these advertisements.