Late model seat swaps,Pleasse school me

[bbobb]

I did what i thought to be a solid search here,but came up short. I was wandering if there are any of you folks that have swapped out you seat with other later model vehicles rather it be car or truck seats. The seat i have is pretty much shot. If you have a pic i would really appreciate the chance to look at it. I know i have 59 1/2 inches from door panel to panel. Hoping i can find a swap that has the flip down center seat/arm rest. Thanks for any help

[KB71C10BBSUPER]

Had a friend swap a seat from a 87 & newer 1500/2500 Chev. Looked great.

[buz48]

I have a 70 c/10 with a bench out of a 89 chevy with a arm rest in it works and look good

[SC C-10]

$23.00 LKQ find from a 1989 Chevy truck. Fits perfectly in the truck, and with the tank under the bed, the extra room is great.

[Joe69C10]

I'm working on swapping an 88-90's Chevy bench into my 69. I was wondering what all you guys did to mount it? Did you use the brackets off the newer seat or somehow swap the original brackets off the old seat?

I've got the seat sitting in my truck now and love it. It sits a little lower than the stock seat and feel great!

Just need to figure out now how everyone here is mounting them.
Posted via Mobile Device

[Sammy]

Haven't done it myself but have set a later model seat in the cab. Believe everyone is re-drilling holes and using a plate for re-enforcement under the cab. Doubt more than one or two holes in the floor will be re-useable.

[kaycee]

99 TAHOE seats used the original seat mounting holes using angel and flat iron scraps I had laying around.I had to drill new holes in the center on trans. hump alittle fab work but nothing major.

[Joe69C10]

I've got the new bench seat sitting in the truck and love the feel of it. Here are a couple of pics. once I have it mounted, next step will be recovering in black w/ houndstooth inserts.

[dagall]

I just picked up a seat like this and it is at the upholstery shop now, but he can't figure out how to put the armrest back in. Do you have any close up pics of the armrest brackets?

Originally Posted by Joe69C10

I've got the new bench seat sitting in the truck and love the feel of it. Here are a couple of pics. once I have it mounted, next step will be recovering in black w/ houndstooth inserts.

[Andy4639]

Greenville SC
Seats for chevy truck pretty nice $100
(864) 238-8376

[dan42]

Anyone have any late model leather covered seats in their pickup?

[LSUMurse]

Here's a thread that some have posted pics to:

http://67-72chevytrucks.com/vboard/s...d.php?t=447657

I (just this weekend) found a set of seats that are out of '99-'06 Tahoe, Suburban, etc. that I am planning on swapping into mine. From what I gather the swaps are usually pretty simple. It just requires a couple holes drilled and some extra backing placed under the cab for support.

These are the ones I got for $85 at Pull-a-Part:

[magwakeenercew2jh]

Originally Posted by dan42

Anyone have any late model leather covered seats in their pickup?

2004 Blazer. Used the blazer seat "slider" seat brackets. Used a couple of the stock holes, and a couple of new ones that
I re-enforced under the cab. Misc rubber "towers" to get to the right height. Blazer seat bracket (mounting point) covers.
Plumbed the electrics into the fuse block.

I think they look pretty good. But that's a personal perspective.

I *do* know this: They are comfy.

[Blakeman350]

Center seat from a 06 tahoe. Took a little figuring out and fabrication but nothin to bad.

[Andy4639]

LQ yard. $60.00 for both leather seats. Heated/electric.

I bought 99 Tahoe seats and installed them in my 71. I recovered them and added aftermarket heaters in both.

Here is my post on how I did them.

http://67-72chevytrucks.com/vboard/s...d.php?t=649636


Here is the finished product!

[magwakeenercew2jh]

Originally Posted by magwakeenercew2jh

2004 Blazer.
I think they look pretty good. But that's a personal perspective.
I *do* know this: They are comfy.

I switched out from the buckets to a '71 GMC bench.

I miss the buckets for "roominess" and for the electric adjustment.

They're gone, though. So, the bench it is!
Fits perfectly.

[Robznob11]

Well if I ever get the truck back from paint, I'll get these installed with the rest of the interior 😣. I was excited to see them come today 😀

[Mickm69]

Here are some I got from theseatguy.com.

They are second row seats from some 2011 SUV. They are leather and very comfortable.
They also fit the truck very well.
Cheers!
Mickm69

[Joe69C10]

Just finished recovering my seat, brackets made so it bolts right in.






Posted via Mobile Device

[Hotrob72]

Originally Posted by Joe69C10

Just finished recovering my seat, brackets made so it bolts right in.






Posted via Mobile Device

Looks great.

[Joe69C10]

Originally Posted by Hotrob72

Looks great.

Thanks! I am very happy with how it turned out. Got the houndstooth material for $19.95 a yard. (upholstery guy needed 2 yards) www.YourAutoTrim.com

He charged me $350 for the labor to build the custom cover and that included the black vinyl. The foam also needed a little build up. It was squashed on the drivers side from use...

Total project to re-cover came in under $400.00

[2500HD]

Originally Posted by Joe69C10

Just finished recovering my seat, brackets made so it bolts right in.






Posted via Mobile Device

Did you use the 88-94 tracks or the original to the truck tracks? Any pictures of how it is mounted?

[50mercfan]

another vote for early 90's chevy truck. this the third one of these truck i've used them in. it's the first thing i look for when i get another one. they're actually a little bit too short. but, if you center it up it looks ok.

[50mercfan]

i use the factory seat brakets, i drill a hole in the floor and use big washers on the bottom. also, i just put in shoulder harness seat belts from an 85 chevy they work great with these seats

[XwalkerX]

Originally Posted by Joe69C10

Just finished recovering my seat, brackets made so it bolts right in.






Posted via Mobile Device

this came out FANTASTIC