Pictures need of Shoulder belts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rod · 05-02-2003, 01:04 PM

Pictures needed of shoulder belts and measurements. I'm gonna try a make a set for a driver.

What I would like is the lenght measurments of each piece end to end.

A picture of both sides of the plastic boot and their measurements. Want pic of the inside and the outside of the boot. Do the originals all have a depression to assist in holding the metal connector in place when not wearing them?

A picture of the anchor bracket that mounts to the cab...a pic of the shoudler belt upper bolt.

And any other pic you can think of that makes the shoulder belts unique.

Are they tagged any different than a regular belt?

Thanks, Rod

Rod · 05-09-2003, 01:44 PM

Post or send me pics any time now Thanks.>LOL

keenee · 05-09-2003, 03:27 PM

GOOD LUCK!
I tried to get info on sholder belts here a few months back and it was like pulling teath. I think someone eventually posted a few shots.
I don't know if more than a few hundred trucks ever had them, or everyone threw them away.
If you do build them please post a pic for all to see. Thank you.

BLAZERMAN · 05-09-2003, 06:50 PM

This is the only pic of original shoulder belts I have seen, they are in joesjunks 71 4x4, he would probably be the one to ask for any other pics or measurments.

Roberty · 05-09-2003, 07:53 PM

I have a NOS set of Shoulder Harness belts. Here are some pictures and some scans of the original paperwork on them.

Roberty · 05-09-2003, 08:04 PM

Scan - Page 1

Roberty · 05-09-2003, 08:09 PM

Another Scan

Roberty · 05-09-2003, 08:16 PM

Another

Roberty · 05-09-2003, 08:18 PM

Picture 2

Roberty · 05-09-2003, 08:19 PM

Another Pic

Roberty · 05-09-2003, 08:20 PM

Pic

Roberty · 05-09-2003, 08:21 PM

Shoulder harness Bolts

Roberty · 05-09-2003, 08:41 PM

Another

Roberty · 05-09-2003, 08:42 PM

Another Pic

Roberty · 05-09-2003, 08:44 PM

Last one

Rod · 05-09-2003, 08:55 PM

Roberty can I get close pics of the boots themselves... I trying to see how the metal bracket is attached in the boot. And a pic of the front side of the boot also. Thanks people for you have posted so far.
Ooops
As I was writing you were still posting.

How about some measurements of the lenghts.

I'll take a pic with my camcorder of something I found and post it.

Do your have a dimple on the viewable side to hold the belt buckle in.
Thanks

Roberty · 05-09-2003, 09:20 PM

Here is a picture of the front.

Roberty · 05-09-2003, 09:30 PM

Quote:

Originally posted by Rod
Roberty can I get close pics of the boots themselves... I trying to see how the metal bracket is attached in the boot. And a pic of the front side of the boot also. Thanks people for you have posted so far.
Ooops
As I was writing you were still posting.

How about some measurements of the lenghts.

I'll take a pic with my camcorder of something I found and post it.

Do your have a dimple on the viewable side to hold the belt buckle in.
Thanks

Rod, My upper "Boot" appears to be slightly different than the one shown above that belongs to Joesjunk.
Here are my measurements. The short upper belt is 17" long on mine and the lower section is 45" and adjustable. Joesjunks' upper belt appears to be longer than mine.

Robert

Rod · 05-09-2003, 10:30 PM

I think I can make this type end work.

**Richard** · 05-09-2003, 10:32 PM

I believe what you have there are lap belts for a Blazer or Suburban not shoulder belts. The end boots are cosmetic only to cover the ends because they are seen on buckets and they do not have the retainer for the male end, also the the belt webbing is to short on the male end. The male end with the nicer boot mounts on the outside of the seat and the female end belt would go on the side next to the console. If you check the instructions you will see what i mean. Sorry.

Roberty · 05-09-2003, 10:33 PM

Quote:

Originally posted by Rod
I think I can make this type end work.

I don't see any reason that souldn't work Rod.

Rod · 05-09-2003, 10:46 PM

other pics I have

Rod · 05-09-2003, 10:52 PM

another

Rod · 05-09-2003, 10:55 PM

another again

Roberty · 05-09-2003, 11:32 PM

Quote:

Originally posted by Richard
I believe what you have there are lap belts for a Blazer or Suburban not shoulder belts. The end boots are cosmetic only to cover the ends because they are seen on buckets and they do not have the retainer for the male end, also the the belt webbing is to short on the male end. The male end with the nicer boot mounts on the outside of the seat and the female end belt would go on the side next to the console. If you check the instructions you will see what i mean. Sorry.

I believe you are right Richard. I bought these a few years back from Jerry Brown at The Truck Shop in Crossville, Tennessee. I do believe now that these are not what I believed them to be all this time.

Me and Jerry might be having a discussion about this soon.

The last picture you have posted Rod looks like my setup.

It's things like this that sure make me proud to be a member here on this forum!! The information here is sure priceless.

Take care,
Robert

05-02-2003, 01:04 PM	#1
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Pictures need of Shoulder belts Pictures needed of shoulder belts and measurements. I'm gonna try a make a set for a driver. What I would like is the lenght measurments of each piece end to end. A picture of both sides of the plastic boot and their measurements. Want pic of the inside and the outside of the boot. Do the originals all have a depression to assist in holding the metal connector in place when not wearing them? A picture of the anchor bracket that mounts to the cab...a pic of the shoudler belt upper bolt. And any other pic you can think of that makes the shoulder belts unique. Are they tagged any different than a regular belt? Thanks, Rod __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

05-09-2003, 01:44 PM	#2
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Post or send me pics any time now Thanks.>LOL __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

05-09-2003, 03:27 PM	#3
keenee Registered User Join Date: Mar 2002 Location: Houston, Pennsylvania Posts: 231	GOOD LUCK! I tried to get info on sholder belts here a few months back and it was like pulling teath. I think someone eventually posted a few shots. I don't know if more than a few hundred trucks ever had them, or everyone threw them away. If you do build them please post a pic for all to see. Thank you. __________________ '96 GMC Suburban 6.5t '99 F**d Windstar '07 SON '09 DAUGHTER XOXOXO Wife

05-09-2003, 06:50 PM	#4
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	This is the only pic of original shoulder belts I have seen, they are in joesjunks 71 4x4, he would probably be the one to ask for any other pics or measurments. Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

05-09-2003, 07:53 PM	#5
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	I have a NOS set of Shoulder Harness belts. Here are some pictures and some scans of the original paperwork on them. Attached Images __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

05-09-2003, 08:04 PM	#6
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Scan - Page 1 Attached Images __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

05-09-2003, 08:09 PM	#7
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Another Scan Attached Images __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

05-09-2003, 08:16 PM	#8
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Another Attached Images __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

05-09-2003, 08:18 PM	#9
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Picture 2 Attached Images __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

05-09-2003, 08:19 PM	#10
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Another Pic Attached Images __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

05-09-2003, 08:20 PM	#11
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Pic Attached Images __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

05-09-2003, 08:21 PM	#12
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Shoulder harness Bolts Attached Images __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

05-09-2003, 08:41 PM	#13
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Another Attached Images __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

05-09-2003, 08:42 PM	#14
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Another Pic Attached Images __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

05-09-2003, 08:44 PM	#15
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Last one Attached Images __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored



Register or Log In To remove these advertisements.

05-09-2003, 08:55 PM	#16
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Roberty can I get close pics of the boots themselves... I trying to see how the metal bracket is attached in the boot. And a pic of the front side of the boot also. Thanks people for you have posted so far. Ooops As I was writing you were still posting. How about some measurements of the lenghts. I'll take a pic with my camcorder of something I found and post it. Do your have a dimple on the viewable side to hold the belt buckle in. Thanks __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

05-09-2003, 09:20 PM	#17
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	Here is a picture of the front. Attached Images __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

05-09-2003, 10:30 PM	#19
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	I think I can make this type end work. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

05-09-2003, 10:32 PM	#20
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,881	I believe what you have there are lap belts for a Blazer or Suburban not shoulder belts. The end boots are cosmetic only to cover the ends because they are seen on buckets and they do not have the retainer for the male end, also the the belt webbing is to short on the male end. The male end with the nicer boot mounts on the outside of the seat and the female end belt would go on the side next to the console. If you check the instructions you will see what i mean. Sorry. __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

05-09-2003, 10:46 PM	#22
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	other pics I have Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

05-09-2003, 10:52 PM	#23
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	another Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

05-09-2003, 10:55 PM	#24
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	another again Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

Register or Log In To remove these advertisements.