Poly Blazer tank venting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

XXL · 05-02-2003, 06:48 PM

OK, I finally got a fitting to thread into one of the poly Blazer tank holes in my truck and I'm going to run a long piece of fuel line up into the nether regions of the right step fender (behind the tire). What should I put on the other end of the fuel line? A plain old breather? A charcoal canister? Or??? I need this thing to be easier to fill with fuel and it gets too gassy and I have to burp it

.

Suggestions?

Kenneth

tom hand · 05-02-2003, 06:56 PM

A fuel filter works great...keeps dirtdobbers out of the line

05-02-2003, 06:48 PM	#1
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Poly Blazer tank venting OK, I finally got a fitting to thread into one of the poly Blazer tank holes in my truck and I'm going to run a long piece of fuel line up into the nether regions of the right step fender (behind the tire). What should I put on the other end of the fuel line? A plain old breather? A charcoal canister? Or??? I need this thing to be easier to fill with fuel and it gets too gassy and I have to burp it . Suggestions? Kenneth __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

05-02-2003, 06:56 PM	#2
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	A fuel filter works great...keeps dirtdobbers out of the line __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.