![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Feb 2010
Location: ELIZABETH CITY
Posts: 87
|
Tailgate trim installation
I have installed the chrome center piece above the tailgate latch, my two upper molding pieces are either too long and need to be cut off, or they need to go over the outer edges of the chrome above the latch. If it is to be cut what is the best way too cut the trim without damaging it? Also what size drill bit is used for installing the clips?
|
![]() |
![]() |
![]() |
#2 |
Hand Crafted C-10
![]() Join Date: Aug 2006
Location: Burien, WA
Posts: 5,180
|
Re: Tailgate trim installation
The two side trims should lap over the handle trim...maybe ~1/4" each side.
On hole size, mine are 1/4" and the holes for the tail light trim is larger (forgot to measure). Last edited by ETsC10; 03-03-2012 at 07:23 PM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: Tailgate trim installation
i have done this install to my tailgate as well.... i dont remember the drill bit size.... however i do know how to shorten trim... what i do: if i have to trim more then 2 inches, i cut it with tin snips about 1/2 inch away from my line then i take a grinder and rind it all the way to my line or you could say my "desired length".... thats worked for me.
|
![]() |
![]() |
![]() |
#4 |
Project Junkie! Fishing Poor!!
![]() Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Re: Tailgate trim installation
Like ETsC10 says they overlap. You push the end of the trim over the center piece. WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2010
Location: ELIZABETH CITY
Posts: 87
|
Re: Tailgate trim installation
Thanks for the replies, I guess in the morning I'll install, my main concern being if the trim overlaps the latch trim it will not set flush to the metal where the two seperate pieces meet.
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Nov 2009
Location: newbury park california
Posts: 1,038
|
Re: Tailgate trim installation
The center piece is tapered for that very reason you just install the clips in the tail gate and slide them on from each side until the mounting bolts line up with the holes then bolt em up. I didn't have to cut mine. Be careful when you push the trim on the center piece so you don't bend it. cheers, Pat
|
![]() |
![]() |
![]() |
Bookmarks |
|
|