![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jun 2002
Posts: 1
|
Door panel installation help
Does anyone know of any "helps" on installing PUI's un-assembled door panels?
thanks |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Nov 2001
Location: Pasadena, Texas, USA
Posts: 1,005
|
Not sure what your asking. Tell us more. What is PUI'S?
Sam
__________________
72 LWB chevy truck. Pasadena, Texas |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2002
Location: Austin, Texas
Posts: 1,048
|
They're just a type of door panel skins. www.pui.cc is the manufacturer. I got them from Classic Industries.
I've pealed the old skins off and cleaned up the metal panels. Do I need to use spray adhesive? thanks brant nnips- haven't logged on it a while forgot I starting using a new logon name. |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
![]()
We used spray adhesive and sprayed the inside of the panel, pulling the material at the edges to get it tight.
It takes time to get it square and get the wrinkles out, but it works easier if the material is warm. Good luck! Jim |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Apr 2003
Location: Howard, Kansas USA
Posts: 1,997
|
I agree with Jim, i helped a guy do this, and used a hair drier to heat them up and stretch them out over the backing.
good luck david
__________________
1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Sep 2002
Location: Austin, Texas
Posts: 1,048
|
Thanks for the help. I'm using plastic clamps to hold the edges down while the glue dries.
__________________
72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives) |
![]() |
![]() |
![]() |
Bookmarks |
|
|