OR Stainless radiator tubes SBC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scotts72heavyhalf · 03-08-2012, 12:24 AM

I had two sets of these fabbed up for my project, you just use couplers for the connections, $50.00 for the pair +$13.95 shipping to the cont US

**jaros44sr** · 03-08-2012, 01:51 AM

Wow, those are nice, wish i could use them. My set up is slightly differant, been trying to find someone to make something like that up

Bump

scotts72heavyhalf · 03-10-2012, 12:03 AM

Bump

**jaros44sr** · 03-10-2012, 12:12 PM

Im interested again, changing my system....my outlet on the bottom comes out straight, how does yours come out of the radiator

Is your engine mounted in the forward holes of the frame or the back two?

scotts72heavyhalf · 03-10-2012, 03:52 PM

Tube on the bottom comes out straight at the bottom and I used the forward mounts from Preformance on line with my SBC, you use short couplers to connect the tubes.

**jaros44sr** · 03-12-2012, 03:38 PM

Really wish i could use these, they are nice! But, with my engine sitting in the rear mounting, and the angle of my water outlet, i just dont think these will work. Wish they would

Anyway, heres a bump for you

Who made them for you?

scotts72heavyhalf · 03-12-2012, 04:38 PM

My best friens is a aircraft builder, he built them.

**richard2717** · 03-12-2012, 05:10 PM

SHouldn't there be a short section of rubber hose at least on one end to allow for the engine and radiator to flex at different angles? It appears there are none in this setup.
Looks nice though.

BB72CHEVKT · 03-12-2012, 05:27 PM

Very nice engine. Whre did the air breather come from?

scotts72heavyhalf · 03-12-2012, 05:28 PM

Ill look and let you know

BB72CHEVKT · 03-12-2012, 05:42 PM

Quote:

Originally Posted by scotts72heavyhalf

Ill look and let you know

Thanks, I can not find anything on them.

scotts72heavyhalf · 03-12-2012, 05:51 PM

Here you go:

http://www.cool-leds.com/aircleanerpics.htm

03-08-2012, 12:24 AM	#1
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Stainless radiator tubes SBC I had two sets of these fabbed up for my project, you just use couplers for the connections, $50.00 for the pair +$13.95 shipping to the cont US Attached Images __________________ Scotts72C10

03-08-2012, 01:51 AM	#2
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,768	Re: Stainless radiator tubes SBC Wow, those are nice, wish i could use them. My set up is slightly differant, been trying to find someone to make something like that up Bump __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-10-2012, 12:03 AM	#3
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: Stainless radiator tubes SBC Bump __________________ Scotts72C10

03-10-2012, 12:12 PM	#4
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,768	Re: Stainless radiator tubes SBC Im interested again, changing my system....my outlet on the bottom comes out straight, how does yours come out of the radiator Is your engine mounted in the forward holes of the frame or the back two? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-10-2012, 03:52 PM	#5
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: Stainless radiator tubes SBC Tube on the bottom comes out straight at the bottom and I used the forward mounts from Preformance on line with my SBC, you use short couplers to connect the tubes. __________________ Scotts72C10

03-12-2012, 03:38 PM	#6
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,768	Re: Stainless radiator tubes SBC Really wish i could use these, they are nice! But, with my engine sitting in the rear mounting, and the angle of my water outlet, i just dont think these will work. Wish they would Anyway, heres a bump for you Who made them for you? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-12-2012, 04:38 PM	#7
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: Stainless radiator tubes SBC My best friens is a aircraft builder, he built them. __________________ Scotts72C10

03-12-2012, 05:10 PM	#8
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,137	Re: Stainless radiator tubes SBC SHouldn't there be a short section of rubber hose at least on one end to allow for the engine and radiator to flex at different angles? It appears there are none in this setup. Looks nice though. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-12-2012, 05:27 PM	#9
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Stainless radiator tubes SBC Very nice engine. Whre did the air breather come from? __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

03-12-2012, 05:28 PM	#10
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: Stainless radiator tubes SBC Ill look and let you know __________________ Scotts72C10

03-12-2012, 05:51 PM	#12
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: Stainless radiator tubes SBC Here you go: http://www.cool-leds.com/aircleanerpics.htm __________________ Scotts72C10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.