Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
03-11-2012, 07:05 PM | #1 |
Registered User
Join Date: Aug 2009
Location: Sacramento, CA.
Posts: 57
|
Wipers won't return to off position
I'm having trouble with my windshield wipers. They work both on low and high, but when i turn them off from the switch they just stop right then and there. They won't return to the stored position. I have to constantly turn them on and off until they get to the fully down position. Anybody have this problem before? Any advise? Thanks.
__________________
1978 K-15, 350/350, 4.11's, 17" KMC's, 37's. |
03-11-2012, 07:40 PM | #2 |
Registered User
Join Date: Sep 2010
Location: Marble Falls, TX
Posts: 1,575
|
Re: Wipers won't return to off position
Pretty sure that's how they are supposed to work. Mine do the same thing.
__________________
Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9 |
03-11-2012, 08:08 PM | #3 |
Registered User
Join Date: Nov 2010
Location: Windsor Locks
Posts: 628
|
Re: Wipers won't return to off position
You need to pull the cover off the wiper motor and bend the ground wiper a little bit so it makes contact again. They wear down or get out of adjustment over time and this it the result. The motor gets 12volts+ at all times and all the switching is done through ground. The wiper makes contact with ground until the wipers reach the bottom of the windshield allowing them to park after the switch has been shut off. Its a real quick easy fix that takes all of 5 mins. Its pretty obvious what you need to do once you pop the cover off.
|
03-11-2012, 08:33 PM | #4 | |
Registered User
Join Date: Sep 2010
Location: Marble Falls, TX
Posts: 1,575
|
Re: Wipers won't return to off position
Quote:
__________________
Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9 |
|
03-11-2012, 08:39 PM | #5 |
Registered User
Join Date: Nov 2010
Location: Windsor Locks
Posts: 628
|
Re: Wipers won't return to off position
The delay module and switch should be plug and play for 78 and up too. I was looking for parts to add that to my 76 but having the wipers park like there supposed to makes it a lot more tolerable.
|
Bookmarks |
|
|