WA Restored Tach/air or Tac/vac dash cluster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Livrat · 03-14-2012, 11:40 PM

I orginally built this cluster to keep and install in my 72 Cheyenne 30 motorhome but decided to free up some $$ for other items needed to help finish the wifes Blazer.

Starting out by "cherry picking" my stash for the nicest OEM gauges I had, resprayed a couple of the needles, media blasted and painted the inner and outer tins, polished the original tach/air lens (these are not reproduced) then assembled it with a reproduction chrome bezel and circuit board.

I will reconfigure with the OEM vacuum gauge pictured and a reproduction tach/vac lens if so desired for the same price

$525.00 shipped in the CONUS, insured, guaranteed to work

Livrat · 03-14-2012, 11:41 PM

more pics

PT'S 70 CST · 03-15-2012, 12:11 AM

Nice work as always.

PT

Livrat · 03-15-2012, 11:26 AM

Quote:

Originally Posted by PT'S 70 CST

Nice work as always.

PT

Paul, Thank you for compliment!!

**72 paul** · 03-15-2012, 11:43 AM

bump for a guy who knows what up and enjoys what hes doing.

**DeadheadNM** · 03-15-2012, 12:55 PM

If configured with a vac gauge, would the oil gauge be 80lb?

Livrat · 03-15-2012, 11:12 PM

Quote:

Originally Posted by DeadheadNM

If configured with a vac gauge, would the oil gauge be 80lb?

I had not planned it that way, but if you purchased it with a vac and wanted an 80lb oil gauge I would do that. (I have a real nice one) same price.

**DeadheadNM** · 03-16-2012, 09:12 AM

Quote:

Originally Posted by Livrat

I had not planned it that way, but if you purchased it with a vac and wanted an 80lb oil gauge I would do that. (I have a real nice one) same price.

Tempting......any chance you have a woodgrain rather than black bezel? Pete

**Disturbed** · 03-15-2012, 02:04 PM

I think my father in law bought a set like this from you at the Monroe fall Swap meet. If so what a great job you did on that one. I was looking at a white faced one you had there and passed but sure regret doing so. Disturbed

Livrat · 03-15-2012, 11:20 PM

Quote:

Originally Posted by Disturbed

I think my father in law bought a set like this from you at the Monroe fall Swap meet. If so what a great job you did on that one. I was looking at a white faced one you had there and passed but sure regret doing so. Disturbed

Thank you for the compliment, Yes I did sell one like it at Monroe and if I remember correctly you pondered that white faced dash for quite some time.

**Disturbed** · 03-16-2012, 10:39 AM

Yes I did. I will be looking for one about June or July so if your interested in building a white face for me with tach ect let me know. Would like one of yours. Best on the market in my opinion. Thanks Disturbed

Livrat · 03-16-2012, 10:32 AM

Pete, Sorry... No I do not..

Daaaanz67 · 03-16-2012, 07:47 PM

Very nice cluster just wanted to say I got the aux battery tray today from you and am very happy with your restoration on the tray thanks again money well spent.

Livrat · 03-16-2012, 09:22 PM

Dan, thank you for the compliment!, Glad to hear the batt tray arrived safely and you are pleased.

Livrat · 03-17-2012, 02:02 PM

Pete, here ya go!!

Livrat · 03-17-2012, 02:03 PM

more pics

**DeadheadNM** · 03-17-2012, 02:19 PM

Awesome! PM sent....

HeavyMetalChevy · 03-17-2012, 02:23 PM

This site and us folks never seize to amaze me with the parts here!!!!! That bezel should be framed!!!!! lol

Livrat · 03-17-2012, 04:26 PM

Sold to DeadheadNM..

Livrat · 03-19-2012, 12:12 AM

Pete, here you go, a teaser pic of your dash reconfigured the way you wanted

HeavyMetalChevy · 03-19-2012, 12:42 AM

Quote:

Originally Posted by Livrat

Pete, here you go, a teaser pic of your dash reconfigured the way you wanted

RESPECT!!! Simply a piece of art!!

**DeadheadNM** · 03-19-2012, 08:39 AM

Quote:

Originally Posted by HeavyMetalChevy

RESPECT!!! Simply a piece of art!!

x2 - Mark, looks great. Thanks!

**DeadheadNM** · 04-08-2012, 07:58 PM

Mark - Back from vacation. Finally got to see the cluster and it looks awesome. Thanks again, Pete

Livrat · 04-08-2012, 08:37 PM

Pete, Glad to hear both you and it arrived safely!
I was hoping it wasn't sitting on your porch all alone for a couple weeks..
Thank you!!

03-14-2012, 11:40 PM	#1
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Restored Tach/air or Tac/vac dash cluster I orginally built this cluster to keep and install in my 72 Cheyenne 30 motorhome but decided to free up some $$ for other items needed to help finish the wifes Blazer. Starting out by "cherry picking" my stash for the nicest OEM gauges I had, resprayed a couple of the needles, media blasted and painted the inner and outer tins, polished the original tach/air lens (these are not reproduced) then assembled it with a reproduction chrome bezel and circuit board. I will reconfigure with the OEM vacuum gauge pictured and a reproduction tach/vac lens if so desired for the same price $525.00 shipped in the CONUS, insured, guaranteed to work Attached Images

03-14-2012, 11:41 PM	#2
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Restored Tach/air or Tac/vac dash cluster more pics Attached Images

03-15-2012, 12:11 AM	#3
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Restored Tach/air or Tac/vac dash cluster Nice work as always. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

03-15-2012, 11:43 AM	#5
72 paul Senior Member Join Date: May 2011 Location: las vegas'nv Posts: 493	Re: Restored Tach/air or Tac/vac dash cluster bump for a guy who knows what up and enjoys what hes doing.

03-15-2012, 12:55 PM	#6
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,389	Re: Restored Tach/air or Tac/vac dash cluster If configured with a vac gauge, would the oil gauge be 80lb? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-15-2012, 02:04 PM	#9
Disturbed Junior Member Join Date: Jun 2011 Location: Post Falls Idaho Posts: 48	Re: Restored Tach/air or Tac/vac dash cluster I think my father in law bought a set like this from you at the Monroe fall Swap meet. If so what a great job you did on that one. I was looking at a white faced one you had there and passed but sure regret doing so. Disturbed

03-16-2012, 10:39 AM	#11
Disturbed Junior Member Join Date: Jun 2011 Location: Post Falls Idaho Posts: 48	Re: Restored Tach/air or Tac/vac dash cluster Yes I did. I will be looking for one about June or July so if your interested in building a white face for me with tach ect let me know. Would like one of yours. Best on the market in my opinion. Thanks Disturbed

03-16-2012, 10:32 AM	#12
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Restored Tach/air or Tac/vac dash cluster Pete, Sorry... No I do not..

03-16-2012, 07:47 PM	#13
Daaaanz67 Registered User Join Date: Nov 2011 Location: Idaho Posts: 857	Re: Restored Tach/air or Tac/vac dash cluster Very nice cluster just wanted to say I got the aux battery tray today from you and am very happy with your restoration on the tray thanks again money well spent.

03-16-2012, 09:22 PM	#14
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Restored Tach/air or Tac/vac dash cluster Dan, thank you for the compliment!, Glad to hear the batt tray arrived safely and you are pleased.

03-17-2012, 02:02 PM	#15
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	pics for DeadheadNM Pete, here ya go!! Attached Images

03-17-2012, 02:03 PM	#16
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	more pictures for DeadheadNM more pics Attached Images

03-17-2012, 02:19 PM	#17
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,389	Re: Restored Tach/air or Tac/vac dash cluster Awesome! PM sent.... __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-17-2012, 02:23 PM	#18
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Restored Tach/air or Tac/vac dash cluster This site and us folks never seize to amaze me with the parts here!!!!! That bezel should be framed!!!!! lol __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

03-17-2012, 04:26 PM	#19
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Restored Tach/air or Tac/vac dash cluster Sold to DeadheadNM..



Register or Log In To remove these advertisements.

03-19-2012, 12:12 AM	#20
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Pictures for DeadheadNM Pete, here you go, a teaser pic of your dash reconfigured the way you wanted Attached Images

04-08-2012, 07:58 PM	#23
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,389	Re: Restored Tach/air or Tac/vac dash cluster Mark - Back from vacation. Finally got to see the cluster and it looks awesome. Thanks again, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-08-2012, 08:37 PM	#24
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Restored Tach/air or Tac/vac dash cluster Pete, Glad to hear both you and it arrived safely! I was hoping it wasn't sitting on your porch all alone for a couple weeks.. Thank you!!

Register or Log In To remove these advertisements.