![]() |
|
![]() |
#1 |
Registered User
Join Date: Aug 2011
Location: Grand Blanc Mi
Posts: 22
|
replacing dash
How big of a project is to remove the dash from a 72 truck?? I`ve never done this before and looking for some pointers before i start.... Thanks
|
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Oct 2004
Location: Milwaukee, WI
Posts: 403
|
Re: replacing dash
The easiest way to remove the dash with the windshield in is remove the dash pad then cut the dash were the dash pad would be. Then remove the three bolts on each side of the dash and remove dash.
Cut the section off the replacement dash that's still in the cab and weld the two pieces together after bolting in the dash. Its easier this way because the dash is spot welding to the cab. |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Oct 2011
Location: Victoria, B.C
Posts: 3,794
|
Re: replacing dash
If you mean the gauge assembly....it is not difficult if you know what to do and what tools to use.
First things first tho', is this what you mean by removing the dash or are you referring to the metalwork portion? Coley ![]()
__________________
....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL 1966 Chevy 1/2 ton (Florida- Red/white) 1972 Chevy 1/2 ton (California- Blue/white) 2005 Chevy Silverado HD2500/Duramax 2000 Dodge Ram 1500 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2011
Location: Grand Blanc Mi
Posts: 22
|
Re: replacing dash
Im talking about the metal dash its cut and I would like to replace it and was wondering how it comes out.Thanks
![]() |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2009
Location: Fairmont, Nebraska
Posts: 547
|
Re: replacing dash
I dont remember how many spotwelds are in the bottom part of the windeshield i wanna say 15 20ish i drilled em out and pryed it out and removed the bolts on the side on my junk 1970 non ac cab and my 1967 ac cab I converted my 67 small window ac cab to a 1970 small window non ac cab
|
![]() |
![]() |
![]() |
#6 |
Florida Edition
![]() ![]() Join Date: Oct 2010
Location: Fruitland Park, FL
Posts: 4,025
|
Re: replacing dash
I see this is your 2nd post....welcome.
If your dash is cut at the radio the easiest way to fix it is to strip everything off and cut it at the guages, glovebox and across the slots where the dash pad mounts. You can pick up a uncut section on the parts board for cheap and have it welded in, thats what I did. You could also cut it all the way across the slots and unbolt it at each end. I'd stay away from the spot welds. Here is a pic of mine.....can you tell where it was fixed?
__________________
70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394 |
![]() |
![]() |
![]() |
#7 | |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: replacing dash
Quote:
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Sep 2011
Location: Owosso, Michigan
Posts: 2,856
|
Re: replacing dash
Replacement piece - cut high
Dash to repair - cut low or swap, either way you then have plenty of metal to trim for proper fitment.
__________________
1967 C10 SWB Owner - Rustbelt Restorations |
![]() |
![]() |
![]() |
#9 |
Active Member
![]() Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: replacing dash
|
![]() |
![]() |
![]() |
Bookmarks |
|
|