|
2 bbl carb screw needed
It happened again!! The screw holding the choke bracket to my carb backed out. I had used blue locktite, this time I will use red. Does anyone have one of these they will sell me?
I need one of the round headed (flat screwdriver) screws that holds a 2 bbl carb together. I have a 67 with a 292, and one of the four screws fell out.
The bolt size is #12 and the thread count is 28 TPI.
From the bottom of the head to the end of the bolt it is about 15/16" long. The head is a little more about 3/16" thick. Total bolt length including head is about 1 1/8".
Here is a picture:
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.
|
03-20-2012, 08:17 PM
Hybrid Mode
