fully restored C-10 on Ebay - not mine

[oem4me]

Pretty sweet little number if you ask me. Costly yes, but not near what it cost to do. Less than 1 hour to go, sorry.
http://cgi.ebay.com/ebaymotors/ws/eB...NA:MOTORS:1123

[rideblue00]

I seen that one. Very nice. Not to far from me. Little pricey.

[MisterC]

Since you're our resident expert, OEM. How would you rate this resto on a 1-10 scale? Understanding that you only have limited pictures to base your rating on.

[oem4me]

Just from pics I'd say 9 to 10. Seller stated $45 K invested the first time around and I believe it. Sold for $21K - that's a pretty good deal if you were looking for a turn-key truck. I personally think the 6cyl/3spd plain-janes have an appeal of thier own. Not all trucks need a V8, big window, and A/C.

[andyspinstriping]

Originally Posted by oem4me

Just from pics I'd say 9 to 10. Seller stated $45 K invested the first time around and I believe it. Sold for $21K - that's a pretty good deal if you were looking for a turn-key truck. I personally think the 6cyl/3spd plain-janes have an appeal of thier own. Not all trucks need a V8, big window, and A/C.

I couldn't agree more...I know that a short bed, fleetside, big window is the cool thing to have on this site but I actually like the long beds and small windows and inline six's etc...

[198plus]

Originally Posted by oem4me

Just from pics I'd say 9 to 10. Seller stated $45 K invested the first time around and I believe it. Sold for $21K - that's a pretty good deal if you were looking for a turn-key truck. I personally think the 6cyl/3spd plain-janes have an appeal of thier own. Not all trucks need a V8, big window, and A/C.

Very well said !!!!!!!!

[LT1 Burb]

Originally Posted by oem4me

Just from pics I'd say 9 to 10. Seller stated $45 K invested the first time around and I believe it. Sold for $21K - that's a pretty good deal if you were looking for a turn-key truck. I personally think the 6cyl/3spd plain-janes have an appeal of thier own. Not all trucks need a V8, big window, and A/C.

No, I agree but if I had both trucks I know which one I would restore, just like if I had a big block 4 speed chevelle and a 2 door post with a 6 cylinder in it, would be a no brainer.

[oem4me]

Originally Posted by LT1 Burb

No, I agree but if I had both trucks I know which one I would restore, just like if I had a big block 4 speed chevelle and a 2 door post with a 6 cylinder in it, would be a no brainer.

Yep, I love those 2 door posts.

[LT1 Burb]

Originally Posted by oem4me

Yep, I love those 2 door posts.

I am looking for a barn find like yours though and I wouldn't hesitate to jump on it.

[theastronaut]

Originally Posted by oem4me

Just from pics I'd say 9 to 10. Seller stated $45 K invested the first time around and I believe it. Sold for $21K - that's a pretty good deal if you were looking for a turn-key truck. I personally think the 6cyl/3spd plain-janes have an appeal of thier own. Not all trucks need a V8, big window, and A/C.

Couldn't have been better said! I've got a '66 deluxe, bbw, short/fleet and understand the appeal of those, but the base level, low option trucks are very neat in their own sense. This truck is very similar to the '65 I restored, and I loved everything about that truck. I too would give it a 9/10 rating, since they didn't re-gap the panels (though it's more "correct" as it is, I can't stand not doing it on a full-tilt resto like this), and the seat cover doesn't have the heat-sealed/embossed pattern in it that the base level seats had. I know '65s had the pattern in the vinyl seat, maybe '66 didn't? Underneath is very tidy, and the engine compartment looks very well detailed and correct, down to the GM heater hoses and tower radiator hose clamps. They got the sheen and color right on the fawn interior paint as well. The dash isn't exactly the brown color it should be, but they tried atleast- that's often overlooked on a '66. I can't tell if they have the correct overspray pattern on the bellhousing, but that's to the point of nit-picking; this is a gorgeous truck and one I'd be very proud to own.

[padresag]

here is a 66 GMC that sold at BJ
http://www.barrett-jackson.com/appli...&aid=463&pop=0
ron

[A.T. RockDriller]

Thanks for posting that BJ '66 step Ron.

What's your take on these comments:

Details: This is a very rare 1966 Stepside as it has a 305cid V6 engine that was used in GMC medium duty trucks. It also has optional power steering. Very rare also because it has 4-wheel drive. Very few 1/2 ton trucks were built with the 305cid V6 (one year only 1966). This is a very complete and detailed restoration.
Am I missing something..?

[LT1 Burb]

Originally Posted by theastronaut

Couldn't have been better said! I've got a '66 deluxe, bbw, short/fleet and understand the appeal of those, but the base level, low option trucks are very neat in their own sense. This truck is very similar to the '65 I restored, and I loved everything about that truck. I too would give it a 9/10 rating, since they didn't re-gap the panels (though it's more "correct" as it is, I can't stand not doing it on a full-tilt resto like this), and the seat cover doesn't have the heat-sealed/embossed pattern in it that the base level seats had. I know '65s had the pattern in the vinyl seat, maybe '66 didn't? Underneath is very tidy, and the engine compartment looks very well detailed and correct, down to the GM heater hoses and tower radiator hose clamps. They got the sheen and color right on the fawn interior paint as well. The dash isn't exactly the brown color it should be, but they tried atleast- that's often overlooked on a '66. I can't tell if they have the correct overspray pattern on the bellhousing, but that's to the point of nit-picking; this is a gorgeous truck and one I'd be very proud to own.

66 had the embossing but 65 did not.

[theastronaut]

Originally Posted by LT1 Burb

66 had the embossing but 65 did not.

I know that the deluxe seats in '66 had the white stripe embossed/heat sealed on, and had some other heat-embossed stripes that '65 didn't have. What about the standard seats though? The '65 I restored came with the standard seat, and had the build sheet still under it so I know it was the original seat. It had a vinyl cover that had a pattern embossed into it. Did the '66 standard seats also have an embossed pattern on the vinyle covers?


Here's a clipping from the '65s original seat cover.

[LT1 Burb]

Nice truck, makes me wonder what a BBW AC PW PS PB truck would bring in similar condition. I don't know if you could build one for 21k in this shape but I don't think I would have restored a plain janer like this myself.

[theastronaut]

Originally Posted by LT1 Burb

Nice truck, makes me wonder what a BBW AC PW PS PB truck would bring in similar condition. I don't know if you could build one for 21k in this shape but I don't think I would have restored a plain janer like this myself.

There was a '66 short/fleet, BBW that sold at Barrett Jackson Scottsdale '12 for $32,450 (includes buyer's commission) that wasn't detailed nearly as nice as the blue ebay truck. There were more detailed pics of the Gold '66 when it was for sale on Ebay and the underside had no detailing at all- everything blacked out, and poorly cleaned/prepped before painting.


http://www.barrett-jackson.com/appli...&aid=443&pop=0

[ChiefRocka]

Originally Posted by LT1 Burb

Nice truck, makes me wonder what a BBW AC PW PS PB truck would bring in similar condition. I don't know if you could build one for 21k in this shape but I don't think I would have restored a plain janer like this myself.

Power windows were an option ?
Posted via Mobile Device

[A.T. RockDriller]

Originally Posted by ChiefRocka

Power windows were an option ?
Posted via Mobile Device

Yer killin me....Chief.

[ChiefRocka]

Originally Posted by A.T. RockDriller

Yer killin me....Chief.

Posted via Mobile Device