heavy duty carrier bearing!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cdowns · 05-07-2003, 04:31 PM

was just looking tru this site www.iedls.com i see they have an aluminium housing polyurethane bushed carrier bearing for 58-72chey trucks. anybody here using one??

**68 Stepside** · 05-07-2003, 06:48 PM

I believe neonlarry has one of those. They look pretty stout to me.

neonlarry · 05-07-2003, 07:08 PM

Yea, I do have one, and it works really well. The only thing is, they are to wide to go into the mount on the frame, so you will have to have it milled down to fit. It wasn't really a big deal though. Just about 15 minutes to measure it, and I got someone to machine it for free. When I called the company, they didn't seem to know anything about it not fitting on 67-72trucks, but one I had it modified it worked fine, and it was better than any other choice you have.

cruzn72 · 05-08-2003, 07:57 PM

Depending on the amount of power you are running, the stock bearing may work. I just did the back half on my truck. I upgraded the tubes and all of the yokes to 1350's. The shop I had do the work on the driveline, said the support in my truck is the heavy duty version and can withstand the 400-500 horse I plan to put to it. I do not have a part number, but you could find out from a shop in your area.

05-07-2003, 04:31 PM	#1
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	heavy duty carrier bearing!!!!! was just looking tru this site www.iedls.com i see they have an aluminium housing polyurethane bushed carrier bearing for 58-72chey trucks. anybody here using one?? __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

05-07-2003, 06:48 PM	#2
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,690	I believe neonlarry has one of those. They look pretty stout to me. __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

05-07-2003, 07:08 PM	#3
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	Yea, I do have one, and it works really well. The only thing is, they are to wide to go into the mount on the frame, so you will have to have it milled down to fit. It wasn't really a big deal though. Just about 15 minutes to measure it, and I got someone to machine it for free. When I called the company, they didn't seem to know anything about it not fitting on 67-72trucks, but one I had it modified it worked fine, and it was better than any other choice you have. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

05-08-2003, 07:57 PM	#4
cruzn72 Registered User Join Date: Mar 2003 Posts: 99	center support bearing Depending on the amount of power you are running, the stock bearing may work. I just did the back half on my truck. I upgraded the tubes and all of the yokes to 1350's. The shop I had do the work on the driveline, said the support in my truck is the heavy duty version and can withstand the 400-500 horse I plan to put to it. I do not have a part number, but you could find out from a shop in your area.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.