CA 69 C20 being parted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jerry Jones · 04-16-2012, 08:51 PM

Everything goes but drivers side inner and outer fender and core support. First "I will take it" gets it, most everything is the big stuff so shipping could be pricey but I will work with you and see what I can do. Fenders were shaved of markers but the housings are still inside.

All prices are before shipping.

16" beauty rings $20.00
Glove box door $20.00
Power brake w/ master & valve $25.00

Jerry Jones · 04-16-2012, 08:53 PM

More pics and prices to follow, let me know if you see something that you can't live without.

ScottG · 04-16-2012, 08:58 PM

How much for just the mufflers?

Jerry Jones · 04-16-2012, 09:12 PM

Quote:

Originally Posted by ScottG

How much for just the mufflers?

How about $40 plus the ride?

ScottG · 04-16-2012, 09:15 PM

Quote:

Originally Posted by Jerry Jones

How about $40 plus the ride?

Let me know what shipping is to 93003. If it's not too much (on a budget), I'm in.

Jerry Jones · 04-16-2012, 10:15 PM

Quote:

Originally Posted by ScottG

Let me know what shipping is to 93003. If it's not too much (on a budget), I'm in.

It looks like I can them to you for $16.00 shipping charges.

Marc33 · 04-16-2012, 10:18 PM

How's the grill?
Posted via Mobile Device

ScottG · 04-16-2012, 10:54 PM

Quote:

Originally Posted by Jerry Jones

It looks like I can them to you for $16.00 shipping charges.

I'll take 'em. PM payment info. Thanks, Scott.

Jerry Jones · 04-16-2012, 09:19 PM

I will do a little research, I don't want to cut them off to weigh them if I can sell it complete. So I will get back to you in a bit.

black pearl69 · 04-16-2012, 09:57 PM

How much for the brake booster with master and valve shipped to 72012?

Jerry Jones · 04-16-2012, 11:05 PM

Quote:

Originally Posted by black pearl69

How much for the brake booster with master and valve shipped to 72012?

I will pull it tomorrow and figure shipping for you.

Jerry Jones · 04-16-2012, 10:43 PM

It looks perfectly straight, however someone painted it flat black, I think it will clean up nicely.

Marc33 · 04-16-2012, 10:45 PM

What is the grill on the far left? Looks unpainted
Posted via Mobile Device

Jerry Jones · 04-16-2012, 11:18 PM

Quote:

Originally Posted by Marc33

What is the grill on the far left? Looks unpainted
Posted via Mobile Device

That one has a a slight dent and a micro ding very nice piece though. The painted one I very straight. I would like to get $100 + ride on either of these.

I can get better pics tomorrow when the sun is out.

Jerry Jones · 04-16-2012, 11:19 PM

one more

black pearl69 · 04-16-2012, 11:11 PM

K thanks Jerry.

HeavyMetalChevy · 04-16-2012, 11:19 PM

front bumper condition and price,,, also interested in black grill. Any dingers?

Jerry Jones · 04-16-2012, 11:23 PM

Quote:

Originally Posted by HeavyMetalChevy

front bumper condition and price,,, also interested in black grill. Any dingers?

The front bumper is amazing, I love it and wish I could use it on my '71. I am not sure on what it is worth yet. I see nothing wrong with the black grill, other that it is well preserved with black paint... LOL. will work on more pics of these items tomorrow.

Meatman · 04-17-2012, 12:04 AM

Is it a dana and a posi?
Posted via Mobile Device

Jerry Jones · 04-17-2012, 12:11 AM

Quote:

Originally Posted by Meatman

Is it a dana and a posi?
Posted via Mobile Device

Hmmm, I dunno. SPID does not reflect posi, but I should be able to check in the next few days.

Tuff Gong · 04-17-2012, 12:17 AM

How much for the CA black plates?

Jerry Jones · 04-17-2012, 12:40 AM

Quote:

Originally Posted by Brian Atkinson

How much for the CA black plates?

I have a few sets, I am thinking I am keeping this set, I will check and get back to you!

Satin69 · 04-17-2012, 01:21 AM

Jerry,

What do you want for the floor mounted gas petal?
Posted via Mobile Device
Posted via Mobile Device

dropanddrag71 · 08-09-2012, 07:54 AM

I need either a 4 groove crank pulley or a 2 groove power steering pulley for my 70 c 20 350?

Jerry Jones · 08-09-2012, 07:28 PM

Quote:

Originally Posted by camrycurt

Do you still happen to have both sill plates? If yes, what is the price shipped to 20176?

Thanks!

No sill plates, sorry.

Quote:

Originally Posted by dropanddrag71

I need either a 4 groove crank pulley or a 2 groove power steering pulley for my 70 c 20 350?

I don't have either, sorry.

04-16-2012, 08:51 PM	#1
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	69 C20 being parted Everything goes but drivers side inner and outer fender and core support. First "I will take it" gets it, most everything is the big stuff so shipping could be pricey but I will work with you and see what I can do. Fenders were shaved of markers but the housings are still inside. All prices are before shipping. 16" beauty rings $20.00 Glove box door $20.00 Power brake w/ master & valve $25.00 Attached Images __________________ RIP El Jay! Love you brother!

04-16-2012, 08:53 PM	#2
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: 69 C20 being parted More pics and prices to follow, let me know if you see something that you can't live without. Attached Images __________________ RIP El Jay! Love you brother!

04-16-2012, 08:58 PM	#3
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: 69 C20 being parted How much for just the mufflers? __________________ '67 C20 LBW

04-16-2012, 10:18 PM	#7
Marc33 Registered User Join Date: Feb 2010 Location: San Marcos, Ca Posts: 109	Re: 69 C20 being parted How's the grill? Posted via Mobile Device __________________ Current stable: 1970 K5 Blazer 4x4 1972 K5 Blazer 4x4 SOLD: 1971 GMC Sierra Grande 2500 2wd 1972 Chevrolet K5 Blazer 1966 Chevrolet C20 1972 Chevy Suburban 4x4 1500 1956 Chevy 150 2 door post 1956 Chevy 2 door post bel air 1968 Chevrolet C20 1958 Ford Thunderbird 1968 4x4 Suburban 1/2 ton

04-16-2012, 09:19 PM	#9
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: 69 C20 being parted I will do a little research, I don't want to cut them off to weigh them if I can sell it complete. So I will get back to you in a bit. __________________ RIP El Jay! Love you brother!

04-16-2012, 09:57 PM	#10
black pearl69 Registered User Join Date: Feb 2012 Location: Beebe AR Posts: 45	Re: 69 C20 being parted How much for the brake booster with master and valve shipped to 72012?

04-16-2012, 10:43 PM	#12
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: 69 C20 being parted It looks perfectly straight, however someone painted it flat black, I think it will clean up nicely. __________________ RIP El Jay! Love you brother!

04-16-2012, 10:45 PM	#13
Marc33 Registered User Join Date: Feb 2010 Location: San Marcos, Ca Posts: 109	Re: 69 C20 being parted What is the grill on the far left? Looks unpainted Posted via Mobile Device __________________ Current stable: 1970 K5 Blazer 4x4 1972 K5 Blazer 4x4 SOLD: 1971 GMC Sierra Grande 2500 2wd 1972 Chevrolet K5 Blazer 1966 Chevrolet C20 1972 Chevy Suburban 4x4 1500 1956 Chevy 150 2 door post 1956 Chevy 2 door post bel air 1968 Chevrolet C20 1958 Ford Thunderbird 1968 4x4 Suburban 1/2 ton

04-16-2012, 11:19 PM	#15
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: 69 C20 being parted one more Attached Images __________________ RIP El Jay! Love you brother!

04-16-2012, 11:11 PM	#16
black pearl69 Registered User Join Date: Feb 2012 Location: Beebe AR Posts: 45	Re: 69 C20 being parted K thanks Jerry.

04-16-2012, 11:19 PM	#17
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: 69 C20 being parted front bumper condition and price,,, also interested in black grill. Any dingers? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

04-17-2012, 12:04 AM	#19
Meatman Registered User Join Date: Sep 2004 Location: Topeka, Ks Posts: 604	Re: 69 C20 being parted Is it a dana and a posi? Posted via Mobile Device __________________ Daily-94 K2500 350 5spd extended cab longbox Project Red Velvet-68 C20 396-th400-AC-PS-PB-all original except for the 8 track and the gun rack. Build thread>>>>http://67-72chevytrucks.com/vboard/s...d.php?t=495881 My 01 TA and 88 Formula hide in the garage. :-)

04-17-2012, 12:17 AM	#21
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: 69 C20 being parted How much for the CA black plates?

04-17-2012, 01:21 AM	#23
Satin69 Registered User Join Date: Mar 2012 Location: Gunter, TX Posts: 169	Re: 69 C20 being parted Jerry, What do you want for the floor mounted gas petal? Posted via Mobile Device Posted via Mobile Device __________________ 1956 GMC undergoing LS Swap

08-09-2012, 07:54 AM	#24
dropanddrag71 Registered User Join Date: Jul 2012 Location: Central florida Posts: 178	Re: 69 C20 being parted I need either a 4 groove crank pulley or a 2 groove power steering pulley for my 70 c 20 350? __________________ " You are only coming threw in waves,... Your lips move, but i can't hear what your saying"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.