MT Parting out '89 K5 Blazer

[Dstoltenberg]

Parting out my dads Sheriffs edition '89 k5 Blazer. Currently still runs and drives, haven't had any luck selling it so started parting it out. Its an automatic, TBI 350 4x4 1/2 ton. Basically everything mechanical or electrical has been replaced within the last 5 years.
I'll start off with a list of some of the more desirable stuff with prices. If you see anything you'd like more info on or more detailed pics, just let me know and I'll get back to you with whatever you need and a price. If its not listed or not pictured doesn't mean I don't have it. Willing to cut off patch panels as well.
I am located in Billings, MT. I'm also willing to ship bigger stuff via Greyhound bus. I'm open to offers on everything.

Dual Electric Fans (Out of a buick park avenue I believe), with wiring, thermostat, brackets, and relay. 125$ + S&H
Aluminum Radiator-50$ +S&H
Warn Hubs-75$ shipped
Grill with headlight bezels-Bezels are not perfect, one is cracked-50$ + S&H
MSD Coil-25$ Shipped
Factory Privacy Tint Passengers quarter glass-50$ +S&H
Clear drivers side quarter glass 20$ + S&H
Door Panels- SOLD
Doors-75$ each + S&H. Will include glass and rebuilt innards.
Driveshaft 50$ + S&H. It was made by a driveshaft shop out of texas, ran around 400$ new in '08 I think
Parking Lights- 40$ Shipped for both
Corner Lights- 20$ Shipped for both
Tilt steering column, rebuilt about two months ago-125$ + S&H

Again, need any info anything not listed or pictured just ask.

[Liddy71]

do you have the 2 pieces of chrome that go where you bolt the top on in the back on each side .and the condition of them and pics

[ScottH]

what kind of shape is the dash pad in?

[xrcr]

Interested in the door panels to 63348. I need to verify that they are the same as on a truck. Think they are

[Dstoltenberg]

Liddy, are these what your after? Drivers side has a small ding (Pictured). Other than that They are straight, they are scratched from wear and tear. how about 30$ for the set + S&H?
Scott dash pad is not that great, it has three long cracks running the width of it.
Ill get back to you with a shipping price tonight xrcr

[Liddy71]

I'll pass want some a nice set for a restore

[48cj2a]

Is the radiator overflow jug any good (leak free) if so how much for it with all mounting hardware and hose to 61607?

[special-K]

Are the door mirrors nice? How much for them and the backing plates shipped to 21771?

Also interested in seat belts...condition and price shipped. Thanks

[madcow75]

Maybe interested in your a/c kick panels and your roll up underhood light with as much wiring back to fuse panel as possible. How much to 14222?

[Dstoltenberg]

48cj2a, The old man sold it thursday morning. I have another one somewhere, leak free with all the hardware and the hose, I'll get back to you when i find it.

special-K, The mirrors themselves are very nice, How about 40$ shipped and i'll throw in the housings too? Pics below. The seat belts are nice, Tan color, but they need to be cleaned up. The passengers side buckle plastic is cracked to hell, The rest of them are good. The drivers retractor plastic has a few deep scratches. 60$ Shipped for the set, front & back belts.

Madcow, here are some pics of the kick panels. The underhood light is long gone unfortunately. 30$ shipped for the set.

[Dstoltenberg]

Madcow, I'm an idiot, the underhood light is there. How about 30$ shipped or 45$ for the light and the kick panels?

[madcow75]

Money sent for the underhood light, wiring and a/c kick panels

[special-K]

I'll definitely take the complete mirrors. If you're removing the door panels I'd like to get the backing plates as well. My '85 Jimmy has the tiny chrome sport mirrors,so I need everything.

On the belts,I'll have to hold off at least for now. Mine are in great shape as well,except for some of the little buckle covers are missing,like on yours. I'm heading out of town till Sunday. If you still have these I may get them anyway. Just not a huge priority.

Sending a PM

[Dstoltenberg]

Madcow your kick panels n light were mailed today,
xrcr Your panels will be on their way in the mornin

[Nothinghead]

Is it a safe assumption that your transfer case is not a NP203? if it is by some chance, I would be interested in the shifter as long as it is working well.

[Dstoltenberg]

Stranger things have happened. How do i tell one apart from a 208? Iron case?
Posted via Mobile Device

[Nothinghead]

NP203:
http://www.akfabshop.com/alaskaoffro...s/Tech/203.jpg
NP208:
http://image.jpmagazine.com/f/166710...odge_np208.jpg
yeah, 203 is Iron. not sure about the 208.

[esbstuff]

I need the piece that the air cleaner hose hooks onto that bolts on the core/radiator support. I also need the bolts... The part is approx 12" high and 6" wide (think, mines missing) I would even take one that has a crack or 2... Price shipped to zip 65584?

[harleyhouser]

I would be interested in all the accessories on the front of motor with all brackets and bolts. I would like to convert mine to the one piece serpentine belt system. Also how the gauges (instrument cluster).

Price shipped to 74764

[Dstoltenberg]

Nothinghead, The case is a 203
esbstuff, The one on this blazer doesn't bolt in, it locks into place when you turn it
harleyhouser, unfortunately all the accessories and brackets went with the engine. If your interested, I may have the main bracket off of a 94 pickup that would get you started. let me know.

[Nothinghead]

If the shifter on the 203 is good, how much would you want for the assembly? I want one that indexes.

[Nothinghead]

shipped to 21224

[Dstoltenberg]

The shifter on it is perfect, how about 70$ shipped to your door? I'll give ya everything from where it connects to the t-case up to the shift handle. The Boot and base on it are an 8 out of 10 as well, dirty but no cracks or tears.
Sorry for the picture quality, taken with my cell

[Dstoltenberg]

Nothing head passed on the shifter, ttt
Posted via Mobile Device

[Dstoltenberg]

Ttt, this things still really complete guys