![]() |
|
![]() |
#1 |
Registered User
Join Date: Jan 2011
Location: Paragould Ar.
Posts: 41
|
carb linkage
Hi Guys
Heres my problem I have a 1970 C/10 with a small block V/8 in it with a turbo 350 trans. The trouble is it sets in the 6 cylinder location(the motors up againts the fire wall.) The carb linkage is for a 6. I don't have enough throw to open the 4brl.I know I can put a cable in but I don't think it will help It'll still be too long. Cutting the cable just seems like guess work.Anyone got the same problem? Thanks Buz48 |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: carb linkage
Wouldn't it be better to take the time and position the motor correctly? That way things like, linkage, exhaust and cooling fan operation are all stock replacment items.
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2011
Location: Paragould Ar.
Posts: 41
|
Re: carb linkage
HI Tim
Unfortunately this is the way I bought this I could tell you horror storys about how this was put together ,drive shaft that was cut and welded back together,motor mounts with no bolts in them.Are just a few.I would like to find the guy who put this together and punch him in the nose Buz48 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: carb linkage
I'm sure you don't want to hear this but fixing the problem is going to make life easier in the long run. Maybe start with a CL or better a board sourced drive shaft. Then start moving things around. If you need frame stands/mounts they should be real easy to find on the board as well. If it is a matter of measurements they are likely free for the asking. Downtime is probably the only real problem.
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
![]() |
![]() |
![]() |
#5 |
Chemist under the hood...
Join Date: Apr 2009
Location: Fort Erie,ON, Canada
Posts: 617
|
Re: carb linkage
I had the same problem. My original carb had the right bracket that attached to the linkage but I bought a re-built carb and had to fab something to work with the linkage (after some adjusting, it works fine). Here's a pic.
__________________
Current fleet: 2013 GMC Sierra, 5.3L, 4x4 1988 GMC Sierra, 305, Auto 1984 Jeep Grand Wagoneer, 360 V8 1997 VW Cabrio, 2.0L 2017 Toyota Rav4, 2.5L Stuff I wish I still had: 2013 Toyota Matrix [RIP] 1967 GMC 910 Fleetside, 283 V8 [1st Love-SOLD] 1987 Jeep Cherokee Laredo 4X4, 4.0 I-6 [SOLD} 1994 Chevrolet Caprice Classic, 5.7LV8 [SOLD] 1995 Chevrolet Astro AWD, 4.3L V6 (RIP) 1998 Chevrolet Suburban 4x4, 5.7L V8 [SOLD] |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2007
Location: Lethbridge, AB
Posts: 234
|
Re: carb linkage
Here is a link to exactly what I did when I swapped out my 402 with the factory Quadrasuck for my 454 with a holley. It worked great, and looks awesome too.
http://www.fordmuscle.com/archives/2...kage/index.php |
![]() |
![]() |
![]() |
#7 | |||
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,943
|
Re: carb linkage
Quote:
Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
|
|||
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2011
Location: Paragould Ar.
Posts: 41
|
Re: carb linkage
Thats just what I was looking for
Thanks Buz48 |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jun 2007
Location: Lethbridge, AB
Posts: 234
|
Re: carb linkage
|
![]() |
![]() |
![]() |
Bookmarks |
|
|