How bout some pic's on a Lokar shifter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue Heeler · 04-30-2012, 08:24 PM

Looking to buy a lokar shifter, just wondering if someone has some pictures they could post so i can tell what size to buy? i was thinking 10"??????

66farmer · 04-30-2012, 08:34 PM

I was looking for the same thing. I looked at a lot of pictures and settled on a
"16 I hope I picked the right one.

Blue Heeler · 04-30-2012, 09:50 PM

Quote:

Originally Posted by 66farmer

I was looking for the same thing. I looked at a lot of pictures and settled on a
"16 I hope I picked the right one.

Got any pictures?

steve'62 · 05-01-2012, 07:23 AM

X2 on this not sure what size I want either, thinking 16, but need some pics!
Posted via Mobile Device

coulter · 05-01-2012, 07:37 AM

sry this isnt the size yall thinking bout but here is the tranny mount 23"

tincan1966 · 05-01-2012, 07:44 AM

This is a 12" I put on a TH350 in a '65. The bucket seats were mounted real low, but it worked great with the bench. it's mounted almost all the way back on the mounting bracket and was very comfortable.

Just a side note- I have recently been buying American shifters thru Amazon and saving about $50-60 over Lokar brand. The shifters are almost identical. very happy so far.

tincan1966 · 05-01-2012, 07:47 AM

Sorry- cannot think and type this morning- that is a 16" shifter!

jchav62 · 05-01-2012, 10:05 AM

16" floor mount...

markeb01 · 05-01-2012, 12:57 PM

You might want to take a look at post #36 on the following thread before making a decision:

http://www.jalopyjournal.com/forum/s...=627302&page=2

American Shifter started out with a pretty bad reputation but that seems to have changed significantly. They appear to have developed some features of both the Lokar and the Gennie, and are less expensive than either.

BTW, when I had a TH350, I started out with a 23" Lokar Shifter. Over time I tired of both the rattle and the length. I swapped over to a 16" Gennie and found it a perfect fit for me.

tincan1966 · 05-01-2012, 09:09 PM

[QUOTE=markeb01;5347033]You might want to take a look at post #36 on the following thread before making a decision:

http://www.jalopyjournal.com/forum/s...=627302&page=2

I jumped over and read that forum and it donned on me- why is that the people who buy the cheapest parts, gripe the most about the quality??

I didn't say the shifter I used was perfect, but I got what I expected and it's decent for what I wanted. I do not mind a little "adaptation" or "persuasion" during installation, if I buy a lesser priced part.

steve'62 · 05-01-2012, 01:00 PM

So far I like the 16" floor mount and also the 23"
Posted via Mobile Device

04-30-2012, 08:24 PM	#1
Blue Heeler Registered User Join Date: Dec 2010 Location: Venice, Ca. Posts: 314	How bout some pic's on a Lokar shifter Looking to buy a lokar shifter, just wondering if someone has some pictures they could post so i can tell what size to buy? i was thinking 10"??????

04-30-2012, 08:34 PM	#2
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Re: How bout some pic's on a Lokar shifter I was looking for the same thing. I looked at a lot of pictures and settled on a "16 I hope I picked the right one.

05-01-2012, 07:23 AM	#4
steve'62 Registered User Join Date: Feb 2011 Location: Goodyear,az Posts: 251	Re: How bout some pic's on a Lokar shifter X2 on this not sure what size I want either, thinking 16, but need some pics! Posted via Mobile Device

05-01-2012, 07:37 AM	#5
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: How bout some pic's on a Lokar shifter sry this isnt the size yall thinking bout but here is the tranny mount 23" __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

05-01-2012, 07:44 AM	#6
tincan1966 Registered User Join Date: Oct 2010 Location: Independence,KS Posts: 1,477	Re: How bout some pic's on a Lokar shifter This is a 12" I put on a TH350 in a '65. The bucket seats were mounted real low, but it worked great with the bench. it's mounted almost all the way back on the mounting bracket and was very comfortable. Just a side note- I have recently been buying American shifters thru Amazon and saving about $50-60 over Lokar brand. The shifters are almost identical. very happy so far. Attached Images

05-01-2012, 07:47 AM	#7
tincan1966 Registered User Join Date: Oct 2010 Location: Independence,KS Posts: 1,477	Re: How bout some pic's on a Lokar shifter Sorry- cannot think and type this morning- that is a 16" shifter!

05-01-2012, 10:05 AM	#8
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: How bout some pic's on a Lokar shifter 16" floor mount... Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

05-01-2012, 12:57 PM	#9
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: How bout some pic's on a Lokar shifter You might want to take a look at post #36 on the following thread before making a decision: http://www.jalopyjournal.com/forum/s...=627302&page=2 American Shifter started out with a pretty bad reputation but that seems to have changed significantly. They appear to have developed some features of both the Lokar and the Gennie, and are less expensive than either. BTW, when I had a TH350, I started out with a 23" Lokar Shifter. Over time I tired of both the rattle and the length. I swapped over to a 16" Gennie and found it a perfect fit for me. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502 Last edited by markeb01; 05-01-2012 at 01:04 PM.

05-01-2012, 09:09 PM	#10
tincan1966 Registered User Join Date: Oct 2010 Location: Independence,KS Posts: 1,477	Re: How bout some pic's on a Lokar shifter [QUOTE=markeb01;5347033]You might want to take a look at post #36 on the following thread before making a decision: http://www.jalopyjournal.com/forum/s...=627302&page=2 I jumped over and read that forum and it donned on me- why is that the people who buy the cheapest parts, gripe the most about the quality?? I didn't say the shifter I used was perfect, but I got what I expected and it's decent for what I wanted. I do not mind a little "adaptation" or "persuasion" during installation, if I buy a lesser priced part.

05-01-2012, 01:00 PM	#11
steve'62 Registered User Join Date: Feb 2011 Location: Goodyear,az Posts: 251	Re: How bout some pic's on a Lokar shifter So far I like the 16" floor mount and also the 23" Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.