|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-13-2012, 06:47 PM
|
#1 |
|
Registered User
Join Date: Dec 2011
Location: Attica,indiana
Posts: 264
|
Mustang II with stock height spindles.
I am in the process of building my 55 2nd series and have the frame just about finished, but I was wondering how many have used the stock height spindles . If so how much it lowers the front end with these and the mustang II front end?
|
|
|
|
05-13-2012, 08:18 PM
|
#2 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,705
|
Re: Mustang II with stock height spindles.
A stock spindle centers about 4-1/2 (give or take) inches above the bottom of the ball joint when you use tube A arms. That's about 2-1/4 inches above the bottom of the spindle where it mounts to the ball joint.
 Terrible fuzzy cell phone phone photo Some things factor in including tire size and how high you mount the crossmember in the frame. Last edited by mr48chev; 05-13-2012 at 08:27 PM. |
|
|
|
|
05-13-2012, 09:36 PM
|
#3 |
|
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: Mustang II with stock height spindles.
I have a fatman mustII on my 58 with stock spindles.
Check my build in my sig for pics My rockers are 5 3/4"off the pavement I wouldn't want to be any lower, I drive mine a lot Posted via Mobile Device
__________________
cool, an ogre smiley  Ogre's 58 Truk buildhow to put your truck year and build thread into your signature shop air compressor timer |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
