New Wheels... but what are they from?

[CRGRS 66]

I bought 5 of these wheels, the guy gave me a beat up center cap as an example of what I can do with these. I am going to blast them, paint them black, and put fresh rubber on them for now. I will want to get some nice center caps and beauty rings for them, and having those would repaint them silver.

Can anyone tell me what year/style truck these are from? Can I get new/reproduction center caps and beauty rings for them?

Thanks in advance,
Craigerrr

[junk4cash]

4 x 4 somethin'.
Posted via Mobile Device

[Joemomma1]

80's 4x4 chevy/gmc. If you want them closed you will need 2 rear sets.
Posted via Mobile Device

[jonzcustomshop]

as mentioned they are the ones that come with the 80's chevy/gmc 4x4 ralley wheel..
pic:

[CRGRS 66]

Originally Posted by Joemomma1

80's 4x4 chevy/gmc. If you want them closed you will need 2 rear sets.
Posted via Mobile Device

Thanks, but what do you mean by "If you want them closed you will need 2 rear sets"?

Originally Posted by jonzcustomshop

as mentioned they are the ones that come with the 80's chevy/gmc 4x4 ralley wheel..
pic:

Thanks, so the center caps and beauty rings will fit both the regular rally, and the 4WD rallys?

[71swb4x4]

The people above think you are asking where the center caps come from, not the wheels.

The wheels are aftermarket wheels, very popular in the late 70's and 80's, a lot of different manufacturers. The wheels you have to appear to be tapped for the Chevy center caps. The comment on the two closed ones simply means you will want two open for the front, so your hubs can pass through, and two closed for the back with the logos on them.

[CRGRS 66]

Originally Posted by 71swb4x4

The people above think you are asking where the center caps come from, not the wheels.

The wheels are aftermarket wheels, very popular in the late 70's and 80's, a lot of different manufacturers. The wheels you have to appear to be tapped for the Chevy center caps. The comment on the two closed ones simply means you will want two open for the front, so your hubs can pass through, and two closed for the back with the logos on them.

Okay, I think I get it now. I am 2WD, so I could go with 4 closed caps

[Captainfab]

I have to disagree, those are factory GM white spoke wheels that came on 4wd's in the late 70's, early 80's.

For center caps, you can use either 4 rear caps, or 4 front caps. If you use the front caps, you can fill the centyers with either small convex mirrors, or like I did on mine, round pieces of stainless steel. You can also use '90's to 2000 model 6 lug center caps. Those will require the special lug nuts.

[CRGRS 66]

Originally Posted by Captainfab

I have to disagree, those are factory GM white spoke wheels that came on 4wd's in the late 70's, early 80's.

Thanks Captain, I see now as well that if I want to use them I will first need to increase the inside diameter of the center hole. They will not fit over my front or rear hubs. I can probably return them. Maybe I can drill and tap holes in my Westerns to take aftermarket 70's/80's Chevy center caps, they look like they will accept the beauty rings. I know where I can get my hands on one to do a test fit. I could always blast and paint my westerns if the chrome looks dumb...

Opinions anyone?

Paint my Westerns silver, add center caps, and beauty rings?

Poor mans Rallys...

[Captainfab]

Those wheels should fit over the hubs on your truck just fine. The 4wd ralley wheels fit just fine, so these should too.

[jonzcustomshop]

I have run into that problem with the 73-87 solid steel wheels a couple of times, just a hair too small on some of my trucks... the lug nuts will pop them on, but good luck trying to get 'em off, on one we had to take the lug nuts off and then pull it about 30 feet to loosen it up!

[CRGRS 66]

Originally Posted by jonzcustomshop

I have run into that problem with the 73-87 solid steel wheels a couple of times, just a hair too small on some of my trucks... the lug nuts will pop them on, but good luck trying to get 'em off, on one we had to take the lug nuts off and then pull it about 30 feet to loosen it up!

Good to know, I will make sure one way or another that there is a bit of clearance, thanks so much!

[Chevy Fleetside]

Looks like those wheels came on later model trucks of the 80's. I remember though when I was a kid watching Chips and the blond cop had a chevy stepside and it had those rims on it or something similar. The story is here: http://www.pickuptrucks.com/html/sto...ups/page2.html

[markeb01]

At first I thought they were old Jackman wheels, but I see the spoke design is different. A bit of interesting history is offered on this earlier thread, especially posts #16, #22, and #25.

http://67-72chevytrucks.com/vboard/s...d.php?t=491950

[S-31]

If they don't fit over your hubs they could possibly be the stock wheels from a Jeep Wagoneer 4x4 from the 70's - 80's. They were six lug and alot of them came from the factory with wheels very similar to yours.

[CRGRS 66]

Originally Posted by Chevy Fleetside

Looks like those wheels came on later model trucks of the 80's. I remember though when I was a kid watching Chips and the blond cop had a chevy stepside and it had those rims on it or something similar. The story is here: http://www.pickuptrucks.com/html/sto...ups/page2.html

Thanks for the link, interesting read.

Originally Posted by markeb01

At first I thought they were old Jackman wheels, but I see the spoke design is different. A bit of interesting history is offered on this earlier thread, especially posts #16, #22, and #25.

http://67-72chevytrucks.com/vboard/s...d.php?t=491950

Great link as well Markeb, thanks!

Originally Posted by S-31

If they don't fit over your hubs they could possibly be the stock wheels from a Jeep Wagoneer 4x4 from the 70's - 80's. They were six lug and alot of them came from the factory with wheels very similar to yours.

Thanks s-31

Soliciting opinions... bowtie center caps, beauty rings, and paint them black... or paint them silver. I plan to keep the black/white colour scheme on my truck when I get to that point. I am leaning towards black, and of course I can always change my mind...

[CRGRS 66]

Oh yeah, it was a very warm day yesterday, got my tonneau back on, all but one snap, and funny, that snap was not done up when I bought her

[Chevy Fleetside]

Originally Posted by CRGRS 66

Thanks for the link, interesting read.



Great link as well Markeb, thanks!



Thanks s-31

Soliciting opinions... bowtie center caps, beauty rings, and paint them black... or paint them silver. I plan to keep the black/white colour scheme on my truck when I get to that point. I am leaning towards black, and of course I can always change my mind...

I think Black Wheels on that truck would just set it off. Can anyone Photoshop that here..

[N2TRUX]

Originally Posted by S-31

If they don't fit over your hubs they could possibly be the stock wheels from a Jeep Wagoneer 4x4 from the 70's - 80's. They were six lug and alot of them came from the factory with wheels very similar to yours.

That would be my thoughts too. Those are Jeep wheels.

[jchav62]

They were offered as "Styled Wheels" on late 70's early 80's Blazers & 4x4's.

This is from a 1981 brochure...

[CRGRS 66]

Originally Posted by jchav62

They were offered as "Styled Wheels" on late 70's early 80's Blazers & 4x4's.

This is from a 1981 brochure...

thanks jchav

[CRGRS 66]

okay, so rinsed off the dirt and rattle canned one gloss black, and one with aluminum (all I had), you would have to imaging the P245 60 15's, the beauty rings, and the center caps. like I said I can always change my mind, could even go white which would pick up the black/white colour scheme.