VA wtb speedwarning tin - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 05-23-2012, 02:12 AM

Tach or non tach as long as the brass pin is intact and not loose. Let me know what you have. thanks!

VA72C10 · 05-27-2012, 02:03 AM

ttt

VA72C10 · 05-27-2012, 11:22 PM

ttt

VA72C10 · 05-28-2012, 03:46 PM

ttt

HeavyMetalChevy · 05-28-2012, 10:15 PM

there is a couple on feebay right now.. 1 complete and one for parts

VA72C10 · 05-28-2012, 11:25 PM

yes, I know that

thanks for telling everyone else though

Still looking for just the tin...guessing the dash for parts will go for 250-350 because ebay people pay crazy prices

HeavyMetalChevy · 05-28-2012, 11:27 PM

Quote:

Originally Posted by VA72C10

yes, I know that

thanks for telling everyone else though

Still looking for just the tin...guessing the dash for parts will go for 250-350 because ebay people pay crazy prices

hah.. im going to buy them then

VA72C10 · 05-28-2012, 11:31 PM

Quote:

Originally Posted by HeavyMetalChevy

hah.. im going to buy them then

I didn't say I wasn't going to bid....in fact I already have...

HeavyMetalChevy · 05-28-2012, 11:38 PM

Quote:

Originally Posted by VA72C10

I didn't say I wasn't going to bid....in fact I already have...

Post a pic here of the tins... Maybe I can start dabbling in them as well. I have a bunch of old jigs, dyes, and punches access to through my previous employer Architectural Glass and Metal.

PT'S 70 CST · 05-29-2012, 01:44 AM

Quote:

Originally Posted by VA72C10

yes, I know that

thanks for telling everyone else though

Still looking for just the tin...guessing the dash for parts will go for 250-350 because ebay people pay crazy prices

Hey eveyone there are two speed warning clusters on ebay right now

You boys better dig deeeeeeeep.

PT

VA72C10 · 05-29-2012, 01:47 AM

Quote:

Originally Posted by PT'S 70 CST

Hey eveyone there are two speed warning clusters on ebay right now

You boys better dig deeeeeeeep.

PT

Quote:

Originally Posted by VA72C10

yes, I know that

thanks for telling everyone else though

Still looking for just the tin...guessing the dash for parts will go for 250-350 because ebay people pay crazy prices

see my comment (of course expecting the other one to go higher)

...I guess you have someone wanting to restore one (or two) now?

VA72C10 · 05-29-2012, 12:56 AM

No difference in the tins other than a brass pin installed that the s/w hooks up to inside and wiring harness to the buzzer outside the tin.
Posted via Mobile Device

VA72C10 · 05-29-2012, 12:59 AM

The brass pin is the only difference. Tins are identical otherwise.
Posted via Mobile Device
Posted via Mobile Device

PT'S 70 CST · 05-29-2012, 01:59 AM

I have an extra tin but have not made up my mind if I want sell it yet. I know we all look at ebay but you just do not come out and let everyone know what you find. I saw them 10 min. after they were both listed. If I decide to let go of the tin I will let you know. I know someone looking for a nice air pressure gauge do you by chance have one.

PT

HeavyMetalChevy · 05-29-2012, 02:02 AM

Quote:

Originally Posted by PT'S 70 CST

I have an extra tin but have not made up my mind if I want sell it yet. I know we all look at ebay but you just do not come out and let everyone know what you find. I saw them 10 min. after they were both listed. If I decide to let go of the tin I will let you know. I know someone looking for a nice air pressure gauge do you by chance have one.

PT

Dang... I can't seem to do nothing right.

I know there are a gang of insomniacs on here though. I guess from now on I shall play it like Gordon Gecko and stick to insider trading. No love lost..

VA72C10 · 05-29-2012, 02:25 AM

Quote:

Originally Posted by PT'S 70 CST

I have an extra tin but have not made up my mind if I want sell it yet. I know we all look at ebay but you just do not come out and let everyone know what you find. I saw them 10 min. after they were both listed. If I decide to let go of the tin I will let you know. I know someone looking for a nice air pressure gauge do you by chance have one.

PT

I have a very nice air pressure gauge right now....trade?

wish now I hadn't sold you my extra tin last year

and I was trying to make the point to duane about not posting @ ebay....but once the cat was out of the bag made a joke about it...

HeavyMetalChevy · 05-29-2012, 02:31 AM

Quote:

Originally Posted by PT'S 70 CST

It is like the new hot chick in high school, everyone wants her but you got to have a better game than everyone else. Some ebay finds you just keep to yourself and hope that knowone else saw them.

PT

I hear ya' there buddy... I always showed her off and made her available to everyone though. Easy come...easy go.. lol but I feel ya...

Quote:

Originally Posted by VA72C10

I have a very nice air pressure gauge right now....trade?

wish now I hadn't sold you my extra tin last year

and I was trying to make the point to duane about not posting @ ebay....but once the cat was out of the bag made a joke about it...

Yes sir!

PT'S 70 CST · 05-29-2012, 02:09 AM

It is like the new hot chick in high school, everyone wants her but you got to have a better game than everyone else. Some ebay finds you just keep to yourself and hope that knowone else saw them.

PT

PT'S 70 CST · 05-29-2012, 02:33 AM

No trade. I was trying to help someone find a gauge. I have a tach s/w and a reg. s/w tin and am up in the air if I am going to part with either. If truth be known and people were not so keen on factory specs on these clusters you could just drill a hole and put a rubber grommet in there and marry the two wires together.

PT

**leddzepp** · 05-29-2012, 03:18 AM

the tin also has an extra hole in the upper corner behind the speedometer where the cable attaches. i agree with pt, you can easily drill both this hole, and also drill another to connect the two wires
Posted via Mobile Device

VA72C10 · 05-29-2012, 03:52 AM

Quote:

Originally Posted by leddzepp

the tin also has an extra hole in the upper corner behind the speedometer where the cable attaches. i agree with pt, you can easily drill both this hole, and also drill another to connect the two wires
Posted via Mobile Device

I wasn't thinking of that hole I guess because it's easy to drill out.

If I was using for myself that's exactly what I'd do with a grommet and wire...

I'm wanting to put together a show quality cluster with tach/vac/speedwarning with a perfect s/w speedo pt sold me and a perfect buzzer/harness from wes @ classic heartbeat with a tach that looks NOS...

**too much stuff** · 05-29-2012, 09:13 AM

Quote:

Originally Posted by VA72C10

I have a very nice air pressure gauge right now....trade?

wish now I hadn't sold you my extra tin last year

and I was trying to make the point to duane about not posting @ ebay....but once the cat was out of the bag made a joke about it...

Quote:

Originally Posted by PT'S 70 CST

It is like the new hot chick in high school, everyone wants her but you got to have a better game than everyone else. Some ebay finds you just keep to yourself and hope that knowone else saw them.

PT

You have to give duane some credit here. Jonathan was looking for hard to find parts and duane was nice enough to inform him of some. Its not like e-bay is a big secret. Granted, he could have PMd him, but if you were the seller wouldn't you want everyone to know? And keep in mind, both those dashes have been run on e-bay before and the reserve has not been met. Its not like you will score them for $20...

PT'S 70 CST · 05-29-2012, 10:08 AM

Eric we were both giving Duane a hard time about it more than really bieng serious. As for the s/w units on ebay I would be careful with the incomplete one, there are alot of red flags with the dash. 1972 circuit board, missing the brass ground strap, cable is toast, needle coloring is not uniform on all gauges. All of this leads me to think this is nothing but a transplanted s/w tin and head into another dash. I would be willing to bet that the s/w shaft gear that turns the white needle is also broke because the seller shows the other dash with the needle in two different spots but not on the parts dash and all you have to do to turn it is take a small flat head screwdriver and stick in there and turn it. Be careful if you are going to bid on this one. I sent the seller a message with some questions on this one right after he listed them and have not gotten a reply yet and do not expect to get one.

PT

**leddzepp** · 05-29-2012, 01:01 PM

i have yet to buy a speedwarning off of ebay that has worked. either the needle does not adjust due to broken spur gears, or the buzzer is dead, or the speedo head is worn out, etc. i consider any dash bought off ebay a parts dash. sorry for the hijack jonathan...
Posted via Mobile Device

VA72C10 · 05-29-2012, 01:17 PM

no problem guys, keeps this ttt

05-23-2012, 02:12 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	wtb speedwarning tin Tach or non tach as long as the brass pin is intact and not loose. Let me know what you have. thanks! __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-27-2012, 02:03 AM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: wtb speedwarning tin ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-27-2012, 11:22 PM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: wtb speedwarning tin ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-28-2012, 03:46 PM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: wtb speedwarning tin ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-28-2012, 10:15 PM	#5
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: wtb speedwarning tin there is a couple on feebay right now.. 1 complete and one for parts __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

05-28-2012, 11:25 PM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: wtb speedwarning tin yes, I know that thanks for telling everyone else though Still looking for just the tin...guessing the dash for parts will go for 250-350 because ebay people pay crazy prices __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-29-2012, 12:56 AM	#12
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: wtb speedwarning tin No difference in the tins other than a brass pin installed that the s/w hooks up to inside and wiring harness to the buzzer outside the tin. Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-29-2012, 12:59 AM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: wtb speedwarning tin The brass pin is the only difference. Tins are identical otherwise. Posted via Mobile Device Posted via Mobile Device Attached Images __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-29-2012, 01:59 AM	#14
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: wtb speedwarning tin I have an extra tin but have not made up my mind if I want sell it yet. I know we all look at ebay but you just do not come out and let everyone know what you find. I saw them 10 min. after they were both listed. If I decide to let go of the tin I will let you know. I know someone looking for a nice air pressure gauge do you by chance have one. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

05-29-2012, 02:09 AM	#18
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: wtb speedwarning tin It is like the new hot chick in high school, everyone wants her but you got to have a better game than everyone else. Some ebay finds you just keep to yourself and hope that knowone else saw them. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

05-29-2012, 02:33 AM	#19
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: wtb speedwarning tin No trade. I was trying to help someone find a gauge. I have a tach s/w and a reg. s/w tin and am up in the air if I am going to part with either. If truth be known and people were not so keen on factory specs on these clusters you could just drill a hole and put a rubber grommet in there and marry the two wires together. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

05-29-2012, 03:18 AM	#20
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: wtb speedwarning tin the tin also has an extra hole in the upper corner behind the speedometer where the cable attaches. i agree with pt, you can easily drill both this hole, and also drill another to connect the two wires Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

05-29-2012, 10:08 AM	#23
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: wtb speedwarning tin Eric we were both giving Duane a hard time about it more than really bieng serious. As for the s/w units on ebay I would be careful with the incomplete one, there are alot of red flags with the dash. 1972 circuit board, missing the brass ground strap, cable is toast, needle coloring is not uniform on all gauges. All of this leads me to think this is nothing but a transplanted s/w tin and head into another dash. I would be willing to bet that the s/w shaft gear that turns the white needle is also broke because the seller shows the other dash with the needle in two different spots but not on the parts dash and all you have to do to turn it is take a small flat head screwdriver and stick in there and turn it. Be careful if you are going to bid on this one. I sent the seller a message with some questions on this one right after he listed them and have not gotten a reply yet and do not expect to get one. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

05-29-2012, 01:01 PM	#24
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: wtb speedwarning tin i have yet to buy a speedwarning off of ebay that has worked. either the needle does not adjust due to broken spur gears, or the buzzer is dead, or the speedo head is worn out, etc. i consider any dash bought off ebay a parts dash. sorry for the hijack jonathan... Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

05-29-2012, 01:17 PM	#25
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: wtb speedwarning tin no problem guys, keeps this ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.