NM WTB OEM floor pan screws to plug bench seat holes for bucket cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 06-10-2012, 03:36 PM

Looking for the screws GM used on bucket cab trucks to plug the floor pan holes for bench set tracks. See the blue arrows on the attached pic borrowed from member Classic Bowties.

Could also use a set of the under-floor pan bucket brackets....

Thanks.

**DeadheadNM** · 06-10-2012, 07:41 PM

Bump....

VA72C10 · 06-10-2012, 09:05 PM

ttt for you.....seems there'd be a market for these if someone can find something that looks the same and works....

i'm working on the under cab braces but can't find a good local fabricator....yet

**DeadheadNM** · 06-10-2012, 10:38 PM

Quote:

Originally Posted by VA72C10

ttt for you.....seems there'd be a market for these if someone can find something that looks the same and works....

i'm working on the under cab braces but can't find a good local fabricator....yet

Would be nice. I'm told GM also used hex head screws in addition to the phillips head type. If you get some braces fabbed up let me know. I've got my K20 in the shop - with your old NOS door mocked up: http://67-72chevytrucks.com/vboard/s...d.php?t=528308

**DeadheadNM** · 06-20-2012, 01:28 PM

Quote:

Originally Posted by VA72C10

ttt for you.....seems there'd be a market for these if someone can find something that looks the same and works....

i'm working on the under cab braces but can't find a good local fabricator....yet

FYI - Classic Parts of America and probably some board venders sell stainless panhead screws for the rear fenders that are a close approximation. These are slightly shorter than I imagine the real ones are.

Part # is: 37-978S (1941-87) Rear Fender Bolts-Phillips

ls1nova71 · 06-20-2012, 01:56 PM

I'm pretty sure these are the same screws they used in the top 2 holes in the bedside where it attaches to the front panel, and the screws used to hold the tailgate handle on and also the splash pans on a rear sport bumper. I just bought some from Jim Carter because they're also used to hold the rear fenders on stepsides. Hope this helps.
Posted via Mobile Device

budnikguy · 09-22-2012, 11:03 AM

Just by the pic they look similar to the screws used to mount the BB heat shield to the cab floor..

06-10-2012, 03:36 PM	#1
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	WTB OEM floor pan screws to plug bench seat holes for bucket cab Looking for the screws GM used on bucket cab trucks to plug the floor pan holes for bench set tracks. See the blue arrows on the attached pic borrowed from member Classic Bowties. Could also use a set of the under-floor pan bucket brackets.... Thanks. Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-10-2012, 07:41 PM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: WTB OEM floor pan screws to plug bench seat holes for bucket cab Bump.... __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-10-2012, 09:05 PM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: WTB OEM floor pan screws to plug bench seat holes for bucket cab ttt for you.....seems there'd be a market for these if someone can find something that looks the same and works.... i'm working on the under cab braces but can't find a good local fabricator....yet __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-20-2012, 01:56 PM	#6
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: WTB OEM floor pan screws to plug bench seat holes for bucket cab I'm pretty sure these are the same screws they used in the top 2 holes in the bedside where it attaches to the front panel, and the screws used to hold the tailgate handle on and also the splash pans on a rear sport bumper. I just bought some from Jim Carter because they're also used to hold the rear fenders on stepsides. Hope this helps. Posted via Mobile Device __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

09-22-2012, 11:03 AM	#7
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: WTB OEM floor pan screws to plug bench seat holes for bucket cab Just by the pic they look similar to the screws used to mount the BB heat shield to the cab floor..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.