VA Tach dash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 06-29-2012, 03:47 AM

Figured I'd offer one for the diy people here

Purchased with the intent to restore but I haven't had the time yet. Tach and all gauges were working according to the person I bought it from but I make no guarantees since I have no truck to test this on right now. Face has some discoloration as seen in the pictures but the needle moves freely. Back tin of the tach is very clean. Printed circuit has one questionable spot in the back where they commonly do right where the wire connector goes in. Older style bulb holders in this one.

still available...last price reduction to 210 picked up, 215 shipped without wiring harness, 230 shipped with points harness (have lots of these ) and 245 shipped with HEI harness.... Please post in thread. First I'll take it...

jjzepplin · 06-29-2012, 04:33 AM

Can I get this to work with an HEI?

VA72C10 · 06-29-2012, 02:23 PM

Quote:

Originally Posted by jjzepplin

Can I get this to work with an HEI?

Yes, factory tachs work well with hei distributors. You just need a different wiring harness. They cost me 15 more so 290 total shipped.
Posted via Mobile Device

junior43 · 07-09-2012, 01:17 PM

I have a cluster with nice 80 lb oil press guage and air pressure guage. both work. would you consider a partial trade for those two guages with the tin mount? It also has a lens with a blank spot where the air press guage is at. Not sure if its correct or not. Maybe you can explain it to me. thanks!!!!

VA72C10 · 07-09-2012, 01:34 PM

Quote:

Originally Posted by junior43

I have a cluster with nice 80 lb oil press guage and air pressure guage. both work. would you consider a partial trade for those two guages with the tin mount? It also has a lens with a blank spot where the air press guage is at. Not sure if its correct or not. Maybe you can explain it to me. thanks!!!!

any pictures? I'd be interested in the oil and air pressure gauges and the small tin they're connected to if they have good color on the faces. Sounds like someone added them to a std lens because you can't purchase the air pressure lenses reproduction. the trade value would depend on how nice the gauges are. Are you wanting a std tach dash in trade? Factory or aftermarket tach?

junior43 · 07-09-2012, 01:57 PM

I have pics on my phone. If you will send me your email, I will get them to you. I have a 67 4x4, just looking for a standard tach cluster.
Posted via Mobile Device

VA72C10 · 07-09-2012, 02:55 PM

sending pm now...

VA72C10 · 07-11-2012, 12:20 PM

pending partial trade with junior43

VA72C10 · 07-13-2012, 03:06 PM

still available... 235 picked up or 260 shipped (if you pay paypal fees or pay as personal funds payment owed)

**WIDESIDE72** · 07-13-2012, 03:31 PM

I will take it if ou can wait til next Friday for payment. PM sent

VA72C10 · 07-13-2012, 04:54 PM

Quote:

Originally Posted by WIDESIDE72

I will take it if ou can wait til next Friday for payment. PM sent

I will do that. Sold pending payment!

**WIDESIDE72** · 07-13-2012, 05:56 PM

Quote:

Originally Posted by VA72C10

I will do that. Sold pending payment!

Thanks, I am awaiting payment on a few things. If they sell sooner I will pay sooner.

**WIDESIDE72** · 07-14-2012, 02:34 PM

Pm sent
Posted via Mobile Device

VA72C10 · 07-24-2012, 04:14 AM

still available...last price reduction to 235 shipped without wiring harness, 250 shipped with points harness (have lots of these

) and 260 shipped with HEI harness....

tabarcus · 07-24-2012, 08:28 AM

Quote:

Originally Posted by VA72C10

still available...last price reduction to 235 shipped without wiring harness, 250 shipped with points harness (have lots of these

) and 260 shipped with HEI harness....

Jonathan,

If I pick up the unit and the HEI harness, what is the price?

towbar · 07-24-2012, 10:12 AM

I'm running a point style dizzy with a crane electronic conversion, using a factory can style coil.....which harness would be needed with the tach dash? thanx!

VA72C10 · 07-25-2012, 11:26 PM

Quote:

Originally Posted by tabarcus

Jonathan,

If I pick up the unit and the HEI harness, what is the price?

235 picked up with the harness.

Quote:

Originally Posted by towbar

I'm running a point style dizzy with a crane electronic conversion, using a factory can style coil.....which harness would be needed with the tach dash? thanx!

I believe it would be the std one...it's mainly the connector on the end that I can tell that's the difference between them...the HEI ones just cost more and are american auto wire brand...

VA72C10 · 07-27-2012, 11:44 PM

Still available for now...

towbar · 07-28-2012, 09:09 AM

This is an original GM tach, and not a repo correct? Would you do $235 shipped with the points harness? thanks.

VA72C10 · 07-28-2012, 01:00 PM

Quote:

Originally Posted by towbar

This is an original GM tach, and not a repo correct? Would you do $235 shipped with the points harness? thanks.

I really don't want to sell for any less than 250 shipped with the harness. Shipping will cost me around 25-30 plus my time/gas taking it to fedex.

Would sell for 225 picked up with a points style harness..

VA72C10 · 07-31-2012, 09:58 PM

ttt

VA72C10 · 08-09-2012, 12:12 AM

still available...

72 tigger · 08-09-2012, 07:15 AM

Have you shipped my stuff?

VA72C10 · 08-09-2012, 12:42 PM

Quote:

Originally Posted by 72 tigger

Have you shipped my stuff?

pm sent

VA72C10 · 08-11-2012, 01:29 AM

Last try before this one will get restored...

... 210 picked up or 230 shipped (if you pay paypal fees or pay as personal funds payment owed) is the lowest I'll go...

06-29-2012, 03:47 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Tach dash Figured I'd offer one for the diy people here Purchased with the intent to restore but I haven't had the time yet. Tach and all gauges were working according to the person I bought it from but I make no guarantees since I have no truck to test this on right now. Face has some discoloration as seen in the pictures but the needle moves freely. Back tin of the tach is very clean. Printed circuit has one questionable spot in the back where they commonly do right where the wire connector goes in. Older style bulb holders in this one. still available...last price reduction to 210 picked up, 215 shipped without wiring harness, 230 shipped with points harness (have lots of these ) and 245 shipped with HEI harness.... Please post in thread. First I'll take it... Attached Images __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 08-11-2012 at 01:34 AM.

06-29-2012, 04:33 AM	#2
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,567	Re: Tach dash Can I get this to work with an HEI? __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

07-09-2012, 01:17 PM	#4
junior43 Registered User Join Date: Mar 2010 Location: Fairmount Indiana Posts: 143	Re: Tach dash I have a cluster with nice 80 lb oil press guage and air pressure guage. both work. would you consider a partial trade for those two guages with the tin mount? It also has a lens with a blank spot where the air press guage is at. Not sure if its correct or not. Maybe you can explain it to me. thanks!!!!

07-09-2012, 01:57 PM	#6
junior43 Registered User Join Date: Mar 2010 Location: Fairmount Indiana Posts: 143	Re: Tach dash I have pics on my phone. If you will send me your email, I will get them to you. I have a 67 4x4, just looking for a standard tach cluster. Posted via Mobile Device

07-09-2012, 02:55 PM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash sending pm now... __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-11-2012, 12:20 PM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash pending partial trade with junior43 __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-13-2012, 03:06 PM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash still available... 235 picked up or 260 shipped (if you pay paypal fees or pay as personal funds payment owed) __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 08-11-2012 at 01:28 AM.

07-13-2012, 03:31 PM	#10
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Tach dash I will take it if ou can wait til next Friday for payment. PM sent

07-14-2012, 02:34 PM	#13
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Tach dash Pm sent Posted via Mobile Device

07-24-2012, 04:14 AM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash still available...last price reduction to 235 shipped without wiring harness, 250 shipped with points harness (have lots of these ) and 260 shipped with HEI harness.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-24-2012, 10:12 AM	#16
towbar Registered User Join Date: Jul 2012 Location: Marshall, NC....heart of the Appalachians.....aka, Gods country!! Posts: 537	Re: Tach dash I'm running a point style dizzy with a crane electronic conversion, using a factory can style coil.....which harness would be needed with the tach dash? thanx!

07-27-2012, 11:44 PM	#18
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash Still available for now... __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-28-2012, 09:09 AM	#19
towbar Registered User Join Date: Jul 2012 Location: Marshall, NC....heart of the Appalachians.....aka, Gods country!! Posts: 537	Re: Tach dash This is an original GM tach, and not a repo correct? Would you do $235 shipped with the points harness? thanks.

07-31-2012, 09:58 PM	#21
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-09-2012, 12:12 AM	#22
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash still available... __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

08-09-2012, 07:15 AM	#23
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,255	Re: Tach dash Have you shipped my stuff?

08-11-2012, 01:29 AM	#25
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Tach dash Last try before this one will get restored... ... 210 picked up or 230 shipped (if you pay paypal fees or pay as personal funds payment owed) is the lowest I'll go... __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.