Some seat help 72 C/10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bustd Knuckles · 07-01-2012, 01:57 PM

I have been trying to find a junkyard set of bucket seats with shoulder and lap belts and console to put in my 72 C/10. One guy suggested 2005 Silverado and up. Has anyone done this swap and can you point me in the right direction-thanks
Posted via Mobile Device

hugger6933 · 07-01-2012, 06:10 PM

actually the years they are talking of are 99 up to the 07 model. A lot of people have put them in and are happy with them ,they do have seat belts built in and the upper trim level ones have a fold down console and they are pretty comfortable. The drawback is that if you are a little larger than most it will be a tight fit in there. A tilt steering column will help a "shortnened" tilt will help a bunch. I am larger than the average bear and those seats just don't work for me at all. I am 6.3 and go in at 380plus but I am big boned. I think Wes has made some brackets to mount on the bottoms of the seats of the 88-98 chevy trucks and they bolt on the floor of the 67-72 c truck . they set low enough that they look pretty good. the seats out of a square73-87 will go in and set REALLY low so it is just in what you want but the 99 and up will do if you are small enough to get under the wheel, but plenty are

Duvall · 07-01-2012, 11:15 PM

I had the same issue as hugger. IMO the seats are just to big for the cabs and don't look right to me. They are comfortable however. By the time you get them cut down to fit you could have put in factory buckets with new seat belt hook ups.

Bustd Knuckles · 07-02-2012, 08:32 AM

Thanks for the heads up hugger. Not being particularly svelte myself room can be an issue. Who is this Wes guy and the brackets to mount later model seats "way down low" ?
Posted via Mobile Device

hugger6933 · 07-02-2012, 12:01 PM

he is a parts vender on here .He is in Wa he is the one that owns a ton of trucks and always is finding some good stuff. His son is the on tghat builds the brackets and they look great he had a post in the parts board about a month ago. i'll try to find it for you

hugger6933 · 07-02-2012, 06:13 PM

I found it and it is in here now toward the top with the title something like re:look what we did seat mount. They look really good

07-01-2012, 01:57 PM	#1
Bustd Knuckles Registered User Join Date: Dec 2011 Location: Hammond,La Posts: 23	Some seat help 72 C/10 I have been trying to find a junkyard set of bucket seats with shoulder and lap belts and console to put in my 72 C/10. One guy suggested 2005 Silverado and up. Has anyone done this swap and can you point me in the right direction-thanks Posted via Mobile Device

07-01-2012, 06:10 PM	#2
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,280	Re: Some seat help 72 C/10 actually the years they are talking of are 99 up to the 07 model. A lot of people have put them in and are happy with them ,they do have seat belts built in and the upper trim level ones have a fold down console and they are pretty comfortable. The drawback is that if you are a little larger than most it will be a tight fit in there. A tilt steering column will help a "shortnened" tilt will help a bunch. I am larger than the average bear and those seats just don't work for me at all. I am 6.3 and go in at 380plus but I am big boned. I think Wes has made some brackets to mount on the bottoms of the seats of the 88-98 chevy trucks and they bolt on the floor of the 67-72 c truck . they set low enough that they look pretty good. the seats out of a square73-87 will go in and set REALLY low so it is just in what you want but the 99 and up will do if you are small enough to get under the wheel, but plenty are

07-01-2012, 11:15 PM	#3
Duvall Registered User Join Date: Dec 2011 Location: Hanford Ca. Posts: 68	Re: Some seat help 72 C/10 I had the same issue as hugger. IMO the seats are just to big for the cabs and don't look right to me. They are comfortable however. By the time you get them cut down to fit you could have put in factory buckets with new seat belt hook ups.

07-02-2012, 08:32 AM	#4
Bustd Knuckles Registered User Join Date: Dec 2011 Location: Hammond,La Posts: 23	Re: Some seat help 72 C/10 Thanks for the heads up hugger. Not being particularly svelte myself room can be an issue. Who is this Wes guy and the brackets to mount later model seats "way down low" ? Posted via Mobile Device

07-02-2012, 12:01 PM	#5
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,280	Re: Some seat help 72 C/10 he is a parts vender on here .He is in Wa he is the one that owns a ton of trucks and always is finding some good stuff. His son is the on tghat builds the brackets and they look great he had a post in the parts board about a month ago. i'll try to find it for you

07-02-2012, 06:13 PM	#6
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,280	Re: Some seat help 72 C/10 I found it and it is in here now toward the top with the title something like re:look what we did seat mount. They look really good



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.