Was this somebody's truck from here? Please look - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72chevyLWB · 05-18-2003, 07:25 PM

I am going to place a bid on this truck. 68 GMC just wondering if somebody from here used to own it or has seen it before.

72chevyLWB · 05-18-2003, 07:26 PM

2

72chevyLWB · 05-18-2003, 07:27 PM

3

orange72 · 05-18-2003, 07:33 PM

how much they want for it?..i sure could use that straight looking bed and tailgate.

**BIG ORANGE** · 05-18-2003, 07:34 PM

I bet before the wreck that was a nice truck, I got a seat like that for the harley truck!Hope you get the truck!

dinnut · 05-18-2003, 09:03 PM

isnt the frame bent?

Roberty · 05-18-2003, 09:27 PM

Quote:

Originally posted by dinnut
isn't the frame bent?

If it isn't, it's a miracle.

*dtlilly* · 05-18-2003, 11:52 PM

That sure looks like a truck worth saving. I bet you will end up with a salvage title for that though.

Longhorn Man · 05-18-2003, 11:57 PM

That hurts just looking at it. (bad memorys of the first longhorn)
The frame is toast. there is (almost) no way that it can't be. These things don't hold up that well when the injury comes from the side up front.

*dtlilly* · 05-19-2003, 12:36 AM

You can buy another frame and front clip at good prices on this board. Match the paint, and you would have just over $1000 in repairs in to a sweet truck.

72chevyLWB · 05-19-2003, 07:49 PM

I am just putting in a bid so I'm not sure if I'll get it. The frame is not shot. If you look where the wheels are and the bumper they look like they are in about the right spot. You can definately tell that the sheet metal is all that was shoved over from the drivers rear view. I think I will cut the frame on my truck and use that box on mine. Then take my box and put it on a frame of one of my long box parts trucks, then put on that cab. I have new spare fenders for a 72, a good hood, and rust free inner fenders and radiator supports. So I'll put that all together and sell it. But I don't want to get my hopes up too much.

Longhorn Man · 05-19-2003, 07:54 PM

This

Looks way too much like this

Whis resulted in this.

I wish I had pics of my friend's in Tx...his was worse than mine...same sort of imact as the blue one your looking at.

The bimper looks to be shoved over by at least 6 inches to me...but that could be the camera angle.

**old Rusty C10** · 05-19-2003, 07:58 PM

well if it goes cheap enough the cab and bed are worth it alone the motor and tranny might be ok too. Its good as a parts truck or to swap out the frame and put on a nose

72chevyLWB · 05-19-2003, 09:46 PM

Ahhh, I see now. Your longhorn frame is/was straightenable though. If I get the truck I'll get it here and see exactly what I want to do. What would my longbox be worth of my 72? Oh yeah, the bidding ends next Monday. I'll know then

Longhorn Man · 05-19-2003, 10:56 PM

That sucker was bent clear back to teh front of the rear springs, it was torn and ripped in 3 places. It may well have been repairable...but I wouldn't own it.

694X4 · 05-20-2003, 09:34 AM

If you can pick it up i have a frame for sale near columbus ohio. Make me an offer.

Longhorn Man · 05-20-2003, 11:26 PM

Me? or 72chevyLWB?
I don't need one...but what do you have there? short, long, longhorn?

05-18-2003, 07:25 PM	#1
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	Was this somebody's truck from here? Please look I am going to place a bid on this truck. 68 GMC just wondering if somebody from here used to own it or has seen it before. Attached Images __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

05-18-2003, 07:26 PM	#2
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	2 Attached Images __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

05-18-2003, 07:27 PM	#3
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	3 Attached Images __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

05-18-2003, 07:33 PM	#4
orange72 Registered User Join Date: Sep 2000 Location: huntington,texas,united states Posts: 399	how much they want for it?..i sure could use that straight looking bed and tailgate. __________________ 1972 chevy long bed. Currently under construction!! Bagged, 383/700r4.

05-18-2003, 07:34 PM	#5
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	I bet before the wreck that was a nice truck, I got a seat like that for the harley truck!Hope you get the truck! __________________ Things happen for a reason!

05-18-2003, 09:03 PM	#6
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	isnt the frame bent? __________________ 70 longbed 496/th400/Ford 9"

05-18-2003, 11:52 PM	#8
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	That sure looks like a truck worth saving. I bet you will end up with a salvage title for that though.

05-18-2003, 11:57 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	That hurts just looking at it. (bad memorys of the first longhorn) The frame is toast. there is (almost) no way that it can't be. These things don't hold up that well when the injury comes from the side up front.

05-19-2003, 12:36 AM	#10
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	You can buy another frame and front clip at good prices on this board. Match the paint, and you would have just over $1000 in repairs in to a sweet truck.

05-19-2003, 07:49 PM	#11
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	I am just putting in a bid so I'm not sure if I'll get it. The frame is not shot. If you look where the wheels are and the bumper they look like they are in about the right spot. You can definately tell that the sheet metal is all that was shoved over from the drivers rear view. I think I will cut the frame on my truck and use that box on mine. Then take my box and put it on a frame of one of my long box parts trucks, then put on that cab. I have new spare fenders for a 72, a good hood, and rust free inner fenders and radiator supports. So I'll put that all together and sell it. But I don't want to get my hopes up too much. __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

05-19-2003, 07:54 PM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	This Looks way too much like this Whis resulted in this. I wish I had pics of my friend's in Tx...his was worse than mine...same sort of imact as the blue one your looking at. The bimper looks to be shoved over by at least 6 inches to me...but that could be the camera angle.

05-19-2003, 07:58 PM	#13
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	well if it goes cheap enough the cab and bed are worth it alone the motor and tranny might be ok too. Its good as a parts truck or to swap out the frame and put on a nose __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-19-2003, 09:46 PM	#14
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	Ahhh, I see now. Your longhorn frame is/was straightenable though. If I get the truck I'll get it here and see exactly what I want to do. What would my longbox be worth of my 72? Oh yeah, the bidding ends next Monday. I'll know then __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

05-19-2003, 10:56 PM	#15
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	That sucker was bent clear back to teh front of the rear springs, it was torn and ripped in 3 places. It may well have been repairable...but I wouldn't own it.

05-20-2003, 09:34 AM	#16
694X4 Registered User Join Date: Jul 2001 Location: utica, oh, Posts: 249	If you can pick it up i have a frame for sale near columbus ohio. Make me an offer. __________________ 69 3/4 ton 4x4 gmc with 6" sky jacker soft ride. 350 / th350 / 205 work in progress



Register or Log In To remove these advertisements.

05-20-2003, 11:26 PM	#17
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Me? or 72chevyLWB? I don't need one...but what do you have there? short, long, longhorn?

Register or Log In To remove these advertisements.