|
|
|
07-12-2012, 10:03 PM
|
#1 |
|
C35 Crew Dually
Join Date: Nov 2008
Location: Belleville Ontario
Posts: 1,116
|
at whits end
im at whits end with this starter installed it no shims like my last starter worked awsome 4 days later starter has slight grind :S so i get a shim kit install 2 shims as per my old boss (great mechanic) tryed starting it started with a slight grind. turned it off started it again huge grind. >
 so i try three shims starts awsome tred a few more times starts awsome then last try GRIND! what am i doing wrong?
__________________
If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892 |
|
|
|
07-12-2012, 10:52 PM
|
#2 |
|
Registered User
Join Date: May 2012
Location: Ravenswood Wv
Posts: 86
|
Re: at whits end
I fought this same thing on a blazer. Went through countless shims and starters. I read in a book that with the starter engaged you should be able to bend a paper clip wire and have it fit snug between the teeth of the starter and flywheel. I tried it with no luck. I changed the flywheel and haven't had a problem since.
Posted via Mobile Device
__________________
i do my burn outs in 4wd 
|
|
|
|
|
07-12-2012, 11:04 PM
|
#3 |
|
Registered User
Join Date: Jun 2011
Location: Atlanta ga
Posts: 150
|
Re: at whits end
I would check that flywheel....
The only time that I have every had a new or rebuilt starter start grinding that soon; the flywheel had issues.
__________________
1984 C20, 454, 4 speed named "Gold Member" |
|
|
|
|
07-12-2012, 11:25 PM
|
#4 | |
|
C35 Crew Dually
Join Date: Nov 2008
Location: Belleville Ontario
Posts: 1,116
|
Re: at whits end
Quote:
__________________
If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892 |
|
|
|
|
|
07-12-2012, 11:39 PM
|
#5 |
|
Registered User
Join Date: Nov 2011
Location: yucca valley,ca
Posts: 206
|
Re: at whits end
Do you have the front support from the starter to the block on there?
Posted via Mobile Device |
|
|
|
|
07-12-2012, 11:46 PM
|
#6 | |
|
C35 Crew Dually
Join Date: Nov 2008
Location: Belleville Ontario
Posts: 1,116
|
Re: at whits end
Quote:
__________________
If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892 |
|
|
|
|
|
07-13-2012, 06:58 AM
|
#7 |
|
Registered User
Join Date: Nov 2011
Location: yucca valley,ca
Posts: 206
|
Re: at whits end
Someone left it off at one point you would ne surprised at how much it helps and keeps the starter from flexing
Posted via Mobile Device |
|
|
|
|
07-13-2012, 07:16 AM
|
#8 |
|
Registered User
Join Date: Oct 2011
Location: Emory TX
Posts: 900
|
Re: at whits end
You might need to shim only the outside bolt. That will tilt the starter in and get the teeth closer to the flywheel.
__________________
___________________ 78 ccsb dually 5.3 4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=491551 |
|
|
|
|
07-15-2012, 01:25 PM
|
#9 | |
|
Account Suspended
Join Date: Dec 2008
Location: indisclosed
Posts: 1,515
|
Re: at whits end
Quote:
|
|
|
|
|
|
07-13-2012, 04:54 PM
|
#10 |
|
C35 Crew Dually
Join Date: Nov 2008
Location: Belleville Ontario
Posts: 1,116
|
Re: at whits end
bought and installed a high tourqe start no issues so far.
__________________
If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892 |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
