|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
07-15-2012, 05:41 PM
|
#1 |
|
Registered User
Join Date: Apr 2011
Location: greenville sc
Posts: 558
|
replaced heater core in my 87 why is the new heater cores niples not straight?
It's sitting in the heater box ready to install but the niples are not straight I looked at two of them and both were like this so I just took one of them it's an AC DELCO 19131974. Anyone else experience this when they replaced their heater core? I wouldn't have taken it but I looked at two that were exactly alike by AC DELCO.
[IMG]  [/IMG]
Last edited by weider1717; 07-15-2012 at 05:58 PM. |
|
|
|
07-15-2012, 06:27 PM
|
#2 |
|
Registered User
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,189
|
Re: replaced heater core in my 87 why is the new heater cores niples not straight?
When I replaced my heater core with an aftermarket copper one the nipples were a little bent, but not as much as yours. I would either return it and check the "straightness" of the replacement one or just leave the one yu have alone. I would not try to bend the nipples because they might crack internally. One the other hand, as long as the nipples are not cracked, I don't see what harm being bent would do.
|
|
|
|
|
07-15-2012, 07:27 PM
|
#3 |
|
Registered User
Join Date: Apr 2011
Location: greenville sc
Posts: 558
|
Re: replaced heater core in my 87 why is the new heater cores niples not straight?
I just wonder about it fitting through the holes it may or may not I haven't had enough back relief yet to try to see if they line up enough to go through!
|
|
|
|
|
07-15-2012, 08:05 PM
|
#4 |
|
Registered User
Join Date: Apr 2011
Location: greenville sc
Posts: 558
|
Re: replaced heater core in my 87 why is the new heater cores niples not straight?
take a look at this one same way if not worse wonder why they attach them knowing they're not lined up straight? http://www.ebay.com/itm/1973-74-75-7...8596f2&vxp=mtr
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
