Instrument panel-Help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hanssolo · 05-21-2003, 05:10 PM

If a lite bulb is out will the ammeter or temp guage not work? Also, does the wire wound resistor go on the temp or ammeter guage? Does it go- insulator-printed circuit-nut-resistor-nut?
Thanx.

hanssolo · 05-21-2003, 07:17 PM

O.K. Got the guages set right(I think). Had the resistor running horiz. instead of vertical on the temp. guage. But lights still screwy! If you mix up the directional signal bulbs with the regular bulbs will this cause flaky instument lite problems?

hanssolo · 05-21-2003, 08:50 PM

Finally. Apparently theres another ground needed besides the one in the wiring harness, which on my instrument cluster is provided by .....the oil line to the oil pressure gauge. I'm tired.

meathead95 · 05-21-2003, 08:57 PM

where are you from i used to live just south of decatur and istill have a ton of parts up their

*Gee_Emm* · 05-21-2003, 10:09 PM

Glad I could help :p

hanssolo · 05-22-2003, 02:42 AM

meathead- I'm in Bloomington. What's happenin'.

05-21-2003, 05:10 PM	#1
hanssolo Registered User Join Date: Sep 2001 Location: central Ill. USA Posts: 447	Instrument panel-Help! If a lite bulb is out will the ammeter or temp guage not work? Also, does the wire wound resistor go on the temp or ammeter guage? Does it go- insulator-printed circuit-nut-resistor-nut? Thanx. __________________ 69 C10 longbed: 357c.i. /TH400/3.73s/AC/ beige primer/saving $ for paint ______________________________

05-21-2003, 07:17 PM	#2
hanssolo Registered User Join Date: Sep 2001 Location: central Ill. USA Posts: 447	O.K. Got the guages set right(I think). Had the resistor running horiz. instead of vertical on the temp. guage. But lights still screwy! If you mix up the directional signal bulbs with the regular bulbs will this cause flaky instument lite problems? __________________ 69 C10 longbed: 357c.i. /TH400/3.73s/AC/ beige primer/saving $ for paint ______________________________

05-21-2003, 08:50 PM	#3
hanssolo Registered User Join Date: Sep 2001 Location: central Ill. USA Posts: 447	Finally. Apparently theres another ground needed besides the one in the wiring harness, which on my instrument cluster is provided by .....the oil line to the oil pressure gauge. I'm tired. __________________ 69 C10 longbed: 357c.i. /TH400/3.73s/AC/ beige primer/saving $ for paint ______________________________

05-21-2003, 08:57 PM	#4
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	where are you from i used to live just south of decatur and istill have a ton of parts up their __________________ 72 2wd blazer 72 swb 4x4

05-22-2003, 02:42 AM	#6
hanssolo Registered User Join Date: Sep 2001 Location: central Ill. USA Posts: 447	meathead- I'm in Bloomington. What's happenin'. __________________ 69 C10 longbed: 357c.i. /TH400/3.73s/AC/ beige primer/saving $ for paint ______________________________

05-21-2003, 10:09 PM	#5
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Glad I could help :p



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.