![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Oct 2009
Location: canton ga
Posts: 12,728
|
New Wiring Harness For 72 ?
I thought I had decided to go with an aftermarket wiring harness from painless but I think I would rather buy a stock replacement with A/C and gauges .Who makes them and who has the best deal on them ? I tried a search but came up empty ,Im sure I have read about them here somewhere but I just cant find it .Any help would be appreciated .
Thanks John |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2011
Location: Wichita Falls, Tx
Posts: 69
|
Re: New Wiring Harness For 72 ?
I installed an American Autowire Classic Update Kit(has options built in for future upgrades), but they do have a factory kit as well. I installed mine a month or so ago, and given the fact that I had 0 experience rewiring vehicles it went really smooth. All be it there are portions of the install that can be tedious and less than fun, what a sense of accomplishment when its all done, and it starts, and everything works. American Autowire is one of the more if not the most expensive kits on the market. I am a believer in the get what you pay for philosophy as well as the raves I heard about their kits, and how thorough the instructions were. My only complaint would be is the kit I bought, and this may or may not apply to the factory kit required special crimping tools for the type of terminations used. You can rent w/ a deposit which you get back except $50 which they put in their pockets. The 2 tools cost around 200 bucks. I intended to rent just to cut down costs for my build, but after I was done I wondered what if something broke, and I need the crimps again. Thus I now own a 200 dollar set of crimps. All things considered I am very pleased. I did the work myself(would have been a fortune to have someone else do it), completely satisfied with the product, and still have options to upgrade certain items in the future.
That being said I have no experience with other kits, but have heard good things about Rebel Wire, and other lower cost kits. Hope this helps, and best of luck to you. Andy
__________________
72 GMC Wideside Quasi Thread |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2011
Location: Chattanooga, TN
Posts: 2,148
|
Re: New Wiring Harness For 72 ?
'Lectric Limited makes some of the best harness out there in my opinion. They will do stock and stock upgraded to HEI and/or different alternators.
http://www.lectriclimited.com You can buy direct or they sell through distributors. Not the cheapest out there, but if you have ever seen an electrical fire, wiring (and seat belts and brakes) is not the place to save a buck.
__________________
'83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project |
![]() |
![]() |
![]() |
#4 | |
It'll Buff Out!
![]() Join Date: Apr 2007
Location: San Diego
Posts: 603
|
Re: New Wiring Harness For 72 ?
Quote:
I have the box at home and my crimpers just showed up friday. It's one of the few kits on the market that also comes with all new headlight/marker light plugs. They were recommended to me from my friend who owns an automotive electrical shop, even with my discount It would have cost me 2k to have him rewire the truck. thats every wire custom cut to length, soldered, etc. I just couldn't spend that much. He did tell me if I came in with a painful kit installed he would rip it out and beat me with it. ![]() I also ordered all new firewall gromets while I was at it. I figured now was the best time to replace them.
__________________
"Instructions are just another mans opinion" Become a Supporting Member http://67-72chevytrucks.com/vboard/payments.php Man Card Rules http://67-72chevytrucks.com/vboard/s...d.php?t=634550 72 Chevy Cheyenne Super 400 LWB |
|
![]() |
![]() |
![]() |
#5 |
Moderator
![]() Join Date: May 2007
Location: Southern Cal
Posts: 20,004
|
Re: New Wiring Harness For 72 ?
American Autowire. Done.
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Oct 2009
Location: canton ga
Posts: 12,728
|
Re: New Wiring Harness For 72 ?
Guys ,thanks for all the replys .I have been looking at American Autowire and the price is not that bad considering the peace of mind that comes with it .And new gromets are a must and I had not thought of them.
Thanks again John |
![]() |
![]() |
![]() |
#7 |
Project Junkie! Fishing Poor!!
![]() Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Re: New Wiring Harness For 72 ?
We sell both American Autowire and M&H wiring. We generaly go with the M&H but if they are out of stock on any particular harness we use american autowire because they do not back-order for the length of time M&H will. They essentualy are the same harnesses. WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jul 2012
Location: wichita ks
Posts: 43
|
Re: New Wiring Harness For 72 ?
you might check out E-Z wire they make a good harness for a resonable price .american made ,good customer service. I have installed a few of them .have one in my 39 chevy ,no problems.
|
![]() |
![]() |
![]() |
#9 | |
It'll Buff Out!
![]() Join Date: Apr 2007
Location: San Diego
Posts: 603
|
Re: New Wiring Harness For 72 ?
Quote:
![]()
__________________
"Instructions are just another mans opinion" Become a Supporting Member http://67-72chevytrucks.com/vboard/payments.php Man Card Rules http://67-72chevytrucks.com/vboard/s...d.php?t=634550 72 Chevy Cheyenne Super 400 LWB |
|
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Nov 2007
Location: Vernon, Texas
Posts: 331
|
Re: New Wiring Harness For 72 ?
Im installing the american autowire classic update kit, and so far so good. I didnt buy the special crimping tool, i have my own "way" of doing that lol
|
![]() |
![]() |
![]() |
Bookmarks |
|
|