![]() |
|
![]() |
#1 |
Registered User
Join Date: Aug 2012
Location: Atlanta, Ga.
Posts: 29
|
My 1968 Project!
I'm new to the forum and this is my newest project. Being a Ford man I'm not knowledgable about Chevy's yet. However, this truck was bought new by my grandfather in 1968. It has always been in the family. 3 owners before me, my grandfather, my uncle, and my cousin. I plan to do a frame off restoration of which I never done before. I plan to remove the bed then the front clip and the cab. Any good books with pictures on how to do this? Any pointers and or tips would be heplful so thank you in advance!
|
![]() |
![]() |
![]() |
#2 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: My 1968 Project!
WELCOME!! to the best resource for these trucks anywhere!!!!You probably want a factory assembly manual and maybe a Factory chassis overhaul manual.They will help with quite a bit of details.Both will require some mechanical knowledge on your part.The assembly manual can be found repo from one of the BB vendors(look on the home page for a listing).I found chassi manual at a swap meet,there are 2 different ones Chassis overhaul and Chassis service.Either is good but they do overlap a lot.Other than that the knowledge here is second to none(even the listed books).
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2012
Location: Nicholasville, KY
Posts: 10
|
Re: My 1968 Project!
looks like there's some great potential there. Nice!
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2009
Location: rotorua/new zealand
Posts: 161
|
Re: My 1968 Project!
thats a good start you have got there.
this is a very helpfull thread to read with LOTS of info and pictures http://67-72chevytrucks.com/vboard/s...d.php?t=318544 theres plenty of other helpfull threads in the 67-72 projects board that pertain to your year and model.
__________________
1969 stepside-305/4spd/12 bolt posi http://67-72chevytrucks.com/vboard/s...d.php?t=477157 1968 pontiac lemans convertible-350/pwrglde/10 bolt 1934 oldsmobile sedan-350/350/12 bolt posi 1930 model a pickup-350/350/jag ind 1928 model a roadster-283/350/9" |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Aug 2012
Location: Atlanta, Ga.
Posts: 29
|
Re: My 1968 Project!
Thanks Guys for the input. It will be helpful in my journey thru the process of building my truck. I know it will be a slow process. I have found the rusted bolts are a major problem already. But that's not anything I haven't been thru before when working on old Mustangs. I have made progess in that fact I have the front clip and the bed ready to be removed from the chassis. Needing the help of a few strong friends now! Hopefully, I can get them over this coming weekend. Again, thanks for the information. Now out to work on the truck some more. What a way to spend my vacation!!!
|
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: Jan 2011
Location: Chattanooga TN
Posts: 6,208
|
Re: My 1968 Project!
Wait .. is that a snake skin on the driver's vent window?
![]() ![]()
__________________
Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 *Currently underway* 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet *Sold* 1985 Silverado Short Fleet *Sold* 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride) |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2012
Location: Atlanta, Ga.
Posts: 29
|
Re: My 1968 Project!
Nope, that's duct tape from where my cousin's husband covered the broken windshield. Thanks for the welcome and offer of help.
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: May 2010
Location: Edmonton, Alberta
Posts: 3,850
|
Re: My 1968 Project!
Welcome!!! The family connection is pretty cool.
__________________
--------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67 |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Aug 2012
Location: Atlanta, Ga.
Posts: 29
|
Re: My 1968 Project!
I'm ready to pull the front clip or so I thought. I'm thinking I haven't removed a bolt somewhere on the back of the fender. Any body have pictures of the placement of all the fender bolts at the cab area. I've removed the 2 at the top and 1 at the bottom but it still seems as if there are more bolts. The bumper is off and the core support bolts are removed. The wiring harness is removed as well as the support brace around the steering rod.
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: May 2010
Location: Edmonton, Alberta
Posts: 3,850
|
Re: My 1968 Project!
If you look up inside the wheelwell towards the back there is a large bolt there. I beleive it has a 5/8 socket head on it.
__________________
--------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67 |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Aug 2012
Location: Atlanta, Ga.
Posts: 29
|
Re: My 1968 Project!
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: May 2010
Location: Edmonton, Alberta
Posts: 3,850
|
Re: My 1968 Project!
__________________
--------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67 |
![]() |
![]() |
![]() |
#13 |
Senior Member
![]() Join Date: Feb 2010
Location: Kennesaw, GA
Posts: 288
|
Re: My 1968 Project!
Hey man, great talking to you today.. Let me know how you did with the front clip removal. Sounds like you've got great plans, as well as realistic time and money goals.
Good luck! Shawn |
![]() |
![]() |
![]() |
#14 |
Senior Member
![]() Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,365
|
Re: My 1968 Project!
Hey Moonbeam ...
![]() ![]() It's great to see you keeping the truck in the family. That doesn't happen to often. As mentioned you will find this site full of info. Keep us posted to your work ![]()
__________________
A husband can be right...or...A husband can be happy. ![]() 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. ![]() 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc ![]() ![]() JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Aug 2012
Location: Atlanta, Ga.
Posts: 29
|
Re: My 1968 Project!
Shawn, it was great talking with you and thanks again for the help! Today was a busy day. I removed the bed and the front clip. The easy part (tear down) in going well. With some luck I will have the cab off by Friday. Wish I could figure how to post new photos of truck for you guys!
P.S. Thanks everyone for the warm welcome! |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Aug 2012
Location: Atlanta, Ga.
Posts: 29
|
Re: My 1968 Project!
Pictures are here. I hope this works!
http://s1131.photobucket.com/albums/...%201968%20C10/! |
![]() |
![]() |
![]() |
#17 | |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,516
|
Re: My 1968 Project!
Quote:
![]() LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Aug 2012
Location: Atlanta, Ga.
Posts: 29
|
Re: My 1968 Project!
|
![]() |
![]() |
![]() |
#19 |
Registered User
![]() Join Date: Mar 2010
Location: tulsa,ok
Posts: 1,085
|
Re: My 1968 Project!
Welcome...Looks like a nice stepper.
__________________
MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=423629 1969 custom/10 swb--SOLD 1968 swb 50th anniv.--SOLD 1967 camaro ss/rs..LS-6-speed, 16-year long project 1956 chevy nomad 1955 chevy 210 2-dr sedan 1978 el-camino ss 1-owner |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Feb 2011
Location: North Carolina
Posts: 993
|
Re: My 1968 Project!
awe man that looks like its going to be fun! good luck!!
|
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Aug 2012
Location: Atlanta, Ga.
Posts: 29
|
Re: My 1968 Project!
Thanks gearys 5600! I finally got a chance to work on the truck and cab is now removed. I'll post pictures as soon as I get a chance to take some more. Got a busy weekend planned since the wife bought us tickets for the Nascar race here in Atlanta.
|
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Aug 2012
Location: Atlanta, Ga.
Posts: 29
|
Re: My 1968 Project!
Maybe time for me to start a build thread. Just hope I can keep up with the pace of others. I know the process is going to take a few years from what I'm seeing. But the finished products are awesome!!!
|
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Jul 2009
Location: Aladdin Wy
Posts: 794
|
Re: My 1968 Project!
LOTS of ziploc bags and a sharpie. Will make your life a whole lot easier when putting it back together!!!
__________________
1955 GMC Hydramatic 1959 Chevy Spartan 100 1969 Chevy C/10 1969 Chevy C/30 Bruiser 1972 GMC (Wrecked) 1972 GMC pickup..old blue Restored Vent Windows https://67-72chevytrucks.com/vboard/...d.php?t=766598 1955 GMC hydramatic build http://67-72chevytrucks.com/vboard/s...d.php?t=429417 ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|