AZ 6 cylinder tach/vacuum/80lb oil pressure dash cluster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mahanian · 08-24-2012, 08:00 PM

I'm selling my 6 cylinder tach/vac dash that I was saving for my 292 but sold the truck. The cluster isn't fully restored but it does have a new bezel, new circuit board (USA made) and new tach harness. The lens has some light scratches on the speedometer area that would need to be buffed out to be show quality. Also the needles are faded and could use a fresh coat of orange to be perfect. There is no rust on the faces of any of the gauges so this would be an easy restore to make the cluster perfect. I checked the tach after I bought the cluster and it worked well but it's being sold as is. I would like $575 shipped

mahanian · 08-24-2012, 08:02 PM

Couple more pics

**leddzepp** · 08-25-2012, 12:23 AM

Wow...this is only the second 6 cylinder tach I have seen come up on the board, and it's a lot nicer than the one I had! If you own a 6 cylinder truck, you better jump on this...because you will probably never see one again.
Posted via Mobile Device

mahanian · 08-25-2012, 12:44 PM

Thanks Scott, it took me almost 2 years to find this one, very rare indeed!

mahanian · 08-26-2012, 11:28 AM

Bump
Posted via Mobile Device

**lolife99** · 08-26-2012, 01:03 PM

I agree.
I don't think 6-cylinder owners know how hard they are to find.
GREAT deal for someone.

A.Bursell · 08-26-2012, 05:24 PM

Interested.

What does it take to swap for a non-tach with gauges cluster? Just run tach wire? Is it hei or points? How does the vacuum hook up?

I have a manual choke- do you have another bezel to swap on and save me some cash?

It is working, correct?

Adam
Posted via Mobile Device

mahanian · 08-26-2012, 06:52 PM

Quote:

Originally Posted by A.Bursell

Interested.

What does it take to swap for a non-tach with gauges cluster? Just run tach wire? Is it hei or points? How does the vacuum hook up?

I have a manual choke- do you have another bezel to swap on and save me some cash?

It is working, correct?

Adam
Posted via Mobile Device

If you already have gauges then all you need to do is run the tach harness, one end to the fuse panel and the other to the distributor. The tach harness is set up for HEI. For the vacuum, you just need to run a lead off of the manifold or carb.

I looked and unfortunately I don't have an extra 67/68 dash panel with the choke cutout.

The tach worked when I tested it when I first bought it but I didn't use it for an extended amount of time, just a quick test because I started tearing down my truck. It's been sitting in my closet ever since.

Let me know if you have any more questions

A.Bursell · 08-27-2012, 01:56 AM

Thanks- going to think about it. (hope I don't regret it!)

Adam
Posted via Mobile Device

mahanian · 08-27-2012, 06:49 PM

Ok, let me know if you decide you want it

to the top!

mahanian · 08-28-2012, 02:01 AM

Bump...
I've only seen one other 6 cyl tach with vacuum gauge before, pretty rare instrument cluster!
Posted via Mobile Device

mahanian · 08-29-2012, 07:22 PM

ttt
Posted via Mobile Device

ak*man · 08-31-2012, 01:10 AM

I'll take it. Just got the green light from the wife. I'll pm you for payment info
Posted via Mobile Device

mahanian · 08-31-2012, 01:20 AM

Sounds good, it's yours!

ak*man · 08-31-2012, 01:06 PM

I'm going to pass on it. Sorry for the trouble mahanian, it is a great dash but this would seal my inline 6 fate for longer than I would like.

mahanian · 08-31-2012, 01:44 PM

No problem Weston, just to clarify my shipped price is for the lower 48 states, sorry for the confusion. I will pack this very well and include insurance for that price. These 6 cylinder tachs are so rare, wouldn't want it to get damaged

9foot1 · 08-31-2012, 01:51 PM

I'll take it. I didn't get the green light but I'm getting used to the beatings.

67chevy1series · 08-31-2012, 01:59 PM

is the hole above the ground ing nut the vaccum?

mahanian · 08-31-2012, 02:11 PM

Quote:

Originally Posted by 9foot1

I'll take it. I didn't get the green light but I'm getting used to the beatings.

I have no idea how much shipping will be to Canada, are you willing to cover the difference?
Posted via Mobile Device

9foot1 · 08-31-2012, 03:32 PM

No problem, I have a U.S. address. I will P.M. you tonight. Thanks

mahanian · 08-31-2012, 04:22 PM

Perfect!

mahanian · 09-02-2012, 12:48 AM

Sold

08-24-2012, 08:00 PM	#1
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	6 cylinder tach/vacuum/80lb oil pressure dash cluster I'm selling my 6 cylinder tach/vac dash that I was saving for my 292 but sold the truck. The cluster isn't fully restored but it does have a new bezel, new circuit board (USA made) and new tach harness. The lens has some light scratches on the speedometer area that would need to be buffed out to be show quality. Also the needles are faded and could use a fresh coat of orange to be perfect. There is no rust on the faces of any of the gauges so this would be an easy restore to make the cluster perfect. I checked the tach after I bought the cluster and it worked well but it's being sold as is. I would like $575 shipped Attached Images __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

08-24-2012, 08:02 PM	#2
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster Couple more pics Attached Images __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

08-25-2012, 12:23 AM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster Wow...this is only the second 6 cylinder tach I have seen come up on the board, and it's a lot nicer than the one I had! If you own a 6 cylinder truck, you better jump on this...because you will probably never see one again. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

08-25-2012, 12:44 PM	#4
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster Thanks Scott, it took me almost 2 years to find this one, very rare indeed! __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

08-26-2012, 11:28 AM	#5
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster Bump Posted via Mobile Device __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

08-26-2012, 01:03 PM	#6
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster I agree. I don't think 6-cylinder owners know how hard they are to find. GREAT deal for someone. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-26-2012, 05:24 PM	#7
A.Bursell Registered User Join Date: Jul 2012 Location: Marysville, WA Posts: 294	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster Interested. What does it take to swap for a non-tach with gauges cluster? Just run tach wire? Is it hei or points? How does the vacuum hook up? I have a manual choke- do you have another bezel to swap on and save me some cash? It is working, correct? Adam Posted via Mobile Device

08-27-2012, 01:56 AM	#9
A.Bursell Registered User Join Date: Jul 2012 Location: Marysville, WA Posts: 294	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster Thanks- going to think about it. (hope I don't regret it!) Adam Posted via Mobile Device

08-27-2012, 06:49 PM	#10
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster Ok, let me know if you decide you want it to the top! __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

08-28-2012, 02:01 AM	#11
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster Bump... I've only seen one other 6 cyl tach with vacuum gauge before, pretty rare instrument cluster! Posted via Mobile Device __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

08-29-2012, 07:22 PM	#12
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster ttt Posted via Mobile Device __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

08-31-2012, 01:10 AM	#13
ak*man Registered User Join Date: Jan 2011 Location: Anchorage, Alaska Posts: 31	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster I'll take it. Just got the green light from the wife. I'll pm you for payment info Posted via Mobile Device

08-31-2012, 01:20 AM	#14
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster Sounds good, it's yours! __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS Last edited by mahanian; 08-31-2012 at 01:08 PM.

08-31-2012, 01:06 PM	#15
ak*man Registered User Join Date: Jan 2011 Location: Anchorage, Alaska Posts: 31	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster I'm going to pass on it. Sorry for the trouble mahanian, it is a great dash but this would seal my inline 6 fate for longer than I would like.

08-31-2012, 01:44 PM	#16
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster No problem Weston, just to clarify my shipped price is for the lower 48 states, sorry for the confusion. I will pack this very well and include insurance for that price. These 6 cylinder tachs are so rare, wouldn't want it to get damaged __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS



Register or Log In To remove these advertisements.

08-31-2012, 01:51 PM	#17
9foot1 Registered User Join Date: Jan 2012 Location: St. Joachim Ontario,Canada Posts: 61	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster I'll take it. I didn't get the green light but I'm getting used to the beatings.

08-31-2012, 01:59 PM	#18
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster is the hole above the ground ing nut the vaccum?

08-31-2012, 03:32 PM	#20
9foot1 Registered User Join Date: Jan 2012 Location: St. Joachim Ontario,Canada Posts: 61	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster No problem, I have a U.S. address. I will P.M. you tonight. Thanks

08-31-2012, 04:22 PM	#21
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster Perfect! __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

09-02-2012, 12:48 AM	#22
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 6 cylinder tach/vacuum/80lb oil pressure dash cluster Sold __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

Register or Log In To remove these advertisements.