The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-25-2012, 05:27 PM   #1
Blue Baby
Registered User
 
Blue Baby's Avatar
 
Join Date: Jul 2012
Location: Salina Kansas
Posts: 48
Rear coil springs are SHOT! Replacement Question???

HELP! The rear coil springs on my truck are collapsed like a bad lung. Is there a way to measure the spring to see about how much the truck is "lowered" because of the bad springs??? The reason I ask is because I'm about to lower it for real and don't want to buy lowering springs only to find out that it has the same ride height and my old worn out ones. I'm going to lower the front 3 inches and would like a slight rake. The three middle coils touch, that's how bad they are. Any ideas on guessing what lower springs I should buy???
Blue Baby is offline   Reply With Quote
Old 08-25-2012, 05:58 PM   #2
Boog
laying low
 
Boog's Avatar
 
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,514
Re: Rear coil springs are SHOT! Replacement Question???

Yep. Someone here will post up the ground to top of the fenderwell measurement of the stock arangement for ya. Simple enough.
__________________
Boog
69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver
primer is finer
91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said.

I stand for the flag and kneel at the cross
Boog is offline   Reply With Quote
Old 08-25-2012, 06:03 PM   #3
Blue Baby
Registered User
 
Blue Baby's Avatar
 
Join Date: Jul 2012
Location: Salina Kansas
Posts: 48
Re: Rear coil springs are SHOT! Replacement Question???

Quote:
Originally Posted by Boog View Post
Yep. Someone here will post up the ground to top of the fenderwell measurement of the stock arangement for ya. Simple enough.
The problem is that I have a utility bed and the wheel well opening is different. I need another way of figuring out how shot these springs are??? Good idea, just can't do it with this set up. Thanks!
Blue Baby is offline   Reply With Quote
Old 08-25-2012, 06:06 PM   #4
Boog
laying low
 
Boog's Avatar
 
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,514
Re: Rear coil springs are SHOT! Replacement Question???

Then I would suggest you post up some side view pics and we can give some suggestions. Have to know where it sits now.
__________________
Boog
69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver
primer is finer
91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said.

I stand for the flag and kneel at the cross
Boog is offline   Reply With Quote
Old 08-25-2012, 06:15 PM   #5
Blue Baby
Registered User
 
Blue Baby's Avatar
 
Join Date: Jul 2012
Location: Salina Kansas
Posts: 48
Re: Rear coil springs are SHOT! Replacement Question???

Quote:
Originally Posted by Boog View Post
Then I would suggest you post up some side view pics and we can give some suggestions. Have to know where it sits now.
Here is a side shot taken today. The driver's side actually sits about 2.5 inches lower. From behind the bed looks crooked, but we just remounted it today and it is on there solid with good mounts. I measured the front from the ground to the fenderwell and it is level.
Attached Images
 
Blue Baby is offline   Reply With Quote
Old 08-25-2012, 07:45 PM   #6
PanelDeland
I am a Referee of life.
 
PanelDeland's Avatar
 
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,992
Re: Rear coil springs are SHOT! Replacement Question???

Maybe the best bet would be to replace all 4 springs.The rear of it probably sets an in or 2 lower with the service bed weight but by using the same amount of drop spring all the way around,you should get some drop with whatever the natural rake is.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion.
You can't fix stupid,not even with duct tape.
"My appearance is due to the fact that "GOD" does punish you for having too much fun!"
Barrett-Jackson has perfected alchemy,they make rust into gold!
"You can lead a horse to water but you can't saddle a duck"
"Cleverly disguised as a 'Responsible Adult'
"Sometimes your Knight in shining armor is just a retard in tinfoil"
PanelDeland is offline   Reply With Quote
Old 08-25-2012, 07:52 PM   #7
Tinkermc
Registered User
 
Join Date: Jul 2011
Location: Farmville, Va
Posts: 3,026
Re: Rear coil springs are SHOT! Replacement Question???

the rear looks very nice whatever the measurement is
Tinkermc is offline   Reply With Quote
Old 08-25-2012, 07:59 PM   #8
69GWC
Registered User
 
Join Date: Jun 2012
Posts: 1,089
Re: Rear coil springs are SHOT! Replacement Question???

Oh man would love to have that truck for my work truck, way cool man.
Posted via Mobile Device
69GWC is offline   Reply With Quote
Old 08-26-2012, 03:50 AM   #9
Xeen
Registered User
 
Xeen's Avatar
 
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
Re: Rear coil springs are SHOT! Replacement Question???

Ok heres how it works.
From the factory the rear of the truck sits 2" higher than the front, also the front end can only be lowered 2" without the suspension geometry being unreconcilable, so in order to drop the front more than 2" you have to get drop spindles, so you have to keep that in mind when you lower your truck.

For example to level out a truck you would drop the front 2" and the rear 4" but for you since you want the hotrod look where the back end is slightly higher than the front end you will need a different ratio.
For example, you can order springs with a 2" front drop and a 3" rear drop, if you want to go lower than that you buy 2" drop spindles, and the appropriate front and rear springs with only a 1" difference to maintain that hotrod look, also just incase you want a little more than an inch difference you can get half inch incriment drop springs as well.
You can also buy "Towing" drop springs that are heavy duty so you can still load up on weight or tow and not lose the look of your trucks stance.
Was that clear as mud?
__________________
Please call me Brian.
Check out My 1972 SWB Fleetside 5.3L Vortec Restomod Build

Last edited by Xeen; 08-26-2012 at 03:56 AM.
Xeen is offline   Reply With Quote
Old 08-26-2012, 10:26 AM   #10
Wrenchbender Ret
Registered User
 
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,229
Re: Rear coil springs are SHOT! Replacement Question???

The original rear springs are vairiable rate. With the added weight of that body, some of the coils touching is normal.
Wrenchbender Ret is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com