CA 8x6.5 16.5x9.75 steel wheels fresh powdercoat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**rgreathouse** · 08-28-2012, 11:22 PM

I have a set of four 8x6.5 16.5x9.75 steel wheels. These fit the stock 3/4 ton dog dish hub caps. Just got back from powder coat, havent mounted. Decided to go different route.

These come with a clean set of 73-87 caps with open ends on two.

Prefer local pickup but will ship at buyers expense. Located in Jackson, CA

$500

Posted via Mobile Device

Posted via Mobile Device
Posted via Mobile Device

**rgreathouse** · 09-18-2012, 01:30 PM

more pics

$450 OBO

**PICKMUP** · 09-18-2012, 04:29 PM

Really nice deep wheels. You might want to show one with the hubcap just sitting in place.

blackhawkip · 09-18-2012, 06:51 PM

I second the need to show the wheels with the hubcaps on them....

**w314speed** · 09-18-2012, 08:27 PM

How much shipped to Marietta, GA Greyhound Terminal? What would be required to blast the front BLACK and powder coat WHITE? Thanks, Dan

**w314speed** · 09-21-2012, 03:57 AM

Quote:

Originally Posted by w314speed

How much shipped to Marietta, GA Greyhound Terminal? What would be required to blast the front BLACK and powder coat WHITE? Thanks, Dan

What was the shipping to Marietta, GA ?

blackhawkip · 09-24-2012, 11:46 PM

PM sent, I am interested in the wheels if they are still available.

**PICKMUP** · 09-18-2012, 10:13 PM

FYI: Our powdercoater says when it is fresh, they just put another coat on and it all melts together...

**rgreathouse** · 09-18-2012, 11:31 PM

w314speed: I will check on shipping tomorrow. I have a friend that powdercoated them black for $150, I would assume it will be cheaper since they wont have to blast them. So ill check on that.

Here is a pic of them before powder coat with my 1972 3/4 ton dog dish caps.

I was planning on throwing in my 73-87 caps that are very clean, but if someone wants the 1972 caps I could do those.(they will need some work though.)

**w314speed** · 09-19-2012, 03:32 AM

The only issue with powder coat is it can be to thick and cause issues with the assembly and hard to install the hubcaps, if it is just coated over.

**rgreathouse** · 09-20-2012, 11:03 PM

Good point w314speed

If someone really wanted them re-powdercoated itd cost $150 to have them blasted and coated any color. Anyone interested? Ive found some other wheels I am interested in.

**rgreathouse** · 09-26-2012, 03:49 PM

PM's replied... I am really hoping to sell local. When I got a price quote for shipping its $150-$200 if anyone has any cheaper ideas for shipping let me know.

blackhawkip · 10-13-2012, 09:43 PM

PM sent

Mayo · 10-14-2012, 09:17 AM

do 67-68 caps work on these rims?

**rgreathouse** · 10-14-2012, 01:51 PM

I dont knoa if theyll fit... They measure arlbout 11 3/4 where the cap snaps on... Anyone interested in these for local pickup? Id like to get rid of them just dont want to deal with shipping.
Posted via Mobile Device

**rgreathouse** · 05-05-2013, 04:42 PM

Still availible.
Posted via Mobile Device

spudly · 05-05-2013, 05:33 PM

Interested, PM sent.
Posted via Mobile Device

warbucket · 05-05-2013, 10:54 PM

I would be interested in the 72 3/4 ton dog dish caps if you wanted to sell the set.

dougo · 05-06-2013, 12:50 AM

Nice wheels.... Bump
Posted via Mobile Device

rusty knuckles 5 · 05-06-2013, 10:10 PM

Hi! i am interested in the 4x4 front hub cabs that fit the 16.5 rims , are they still for sale ? thanks

**rgreathouse** · 05-07-2013, 09:58 AM

The 1972 4x4 set is not availible, I have a complete set of 73 4x4 3/4 ton caps ill sell if your interested?
Posted via Mobile Device

My72BB · 05-07-2013, 08:18 PM

Since this is a little old what's left here...Are the rims and caps still for sale or just caps?

Thanks, Alan

rusty knuckles 5 · 05-07-2013, 09:20 PM

what is the differance in the hub caps 1972 to 1973 ?

boonedogs72 · 05-07-2013, 11:27 PM

How much for just the wheels??? What are they off?
Posted via Mobile Device

rusty knuckles 5 · 05-08-2013, 09:48 PM

Hi! will you sell just the front 4x4 hub caps? what is the price and condition on the 4x4 front hub caps only ? Are they the same hubcaps as in the picture? I already have hubcaps for the rear wheels. Thanks for your time

08-28-2012, 11:22 PM	#1
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 488	8x6.5 16.5x9.75 steel wheels fresh powdercoat I have a set of four 8x6.5 16.5x9.75 steel wheels. These fit the stock 3/4 ton dog dish hub caps. Just got back from powder coat, havent mounted. Decided to go different route. These come with a clean set of 73-87 caps with open ends on two. Prefer local pickup but will ship at buyers expense. Located in Jackson, CA $500 Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

09-18-2012, 01:30 PM	#2
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 488	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat more pics $450 OBO __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

09-18-2012, 04:29 PM	#3
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,134	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat Really nice deep wheels. You might want to show one with the hubcap just sitting in place. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

09-18-2012, 06:51 PM	#4
blackhawkip Registered User Join Date: Dec 2011 Location: Fort Knox, KY Posts: 212	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat I second the need to show the wheels with the hubcaps on them....

09-18-2012, 08:27 PM	#5
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat How much shipped to Marietta, GA Greyhound Terminal? What would be required to blast the front BLACK and powder coat WHITE? Thanks, Dan

09-24-2012, 11:46 PM	#7
blackhawkip Registered User Join Date: Dec 2011 Location: Fort Knox, KY Posts: 212	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat PM sent, I am interested in the wheels if they are still available. __________________ 1972 Cheyenne Super K20 4wd 1972 Chevy Camaro Z28 1972 Cheyenne Super K30 (sold) 1972 Cheyenne Super Shortbed w/402bb (sold) 1972 Custom/Deluxe 2wd Suburban w/402bb (sold) plus too many others.....

09-18-2012, 10:13 PM	#8
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,134	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat FYI: Our powdercoater says when it is fresh, they just put another coat on and it all melts together... __________________ Email: frankeham@comcast.net Phone: 360-956-7170

09-18-2012, 11:31 PM	#9
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 488	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat w314speed: I will check on shipping tomorrow. I have a friend that powdercoated them black for $150, I would assume it will be cheaper since they wont have to blast them. So ill check on that. Here is a pic of them before powder coat with my 1972 3/4 ton dog dish caps. I was planning on throwing in my 73-87 caps that are very clean, but if someone wants the 1972 caps I could do those.(they will need some work though.) __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

09-19-2012, 03:32 AM	#10
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat The only issue with powder coat is it can be to thick and cause issues with the assembly and hard to install the hubcaps, if it is just coated over.

09-20-2012, 11:03 PM	#11
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 488	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat Good point w314speed If someone really wanted them re-powdercoated itd cost $150 to have them blasted and coated any color. Anyone interested? Ive found some other wheels I am interested in. __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

09-26-2012, 03:49 PM	#12
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 488	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat PM's replied... I am really hoping to sell local. When I got a price quote for shipping its $150-$200 if anyone has any cheaper ideas for shipping let me know. __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

10-13-2012, 09:43 PM	#13
blackhawkip Registered User Join Date: Dec 2011 Location: Fort Knox, KY Posts: 212	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat PM sent __________________ 1972 Cheyenne Super K20 4wd 1972 Chevy Camaro Z28 1972 Cheyenne Super K30 (sold) 1972 Cheyenne Super Shortbed w/402bb (sold) 1972 Custom/Deluxe 2wd Suburban w/402bb (sold) plus too many others.....

10-14-2012, 09:17 AM	#14
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat do 67-68 caps work on these rims? __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

10-14-2012, 01:51 PM	#15
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 488	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat I dont knoa if theyll fit... They measure arlbout 11 3/4 where the cap snaps on... Anyone interested in these for local pickup? Id like to get rid of them just dont want to deal with shipping. Posted via Mobile Device __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

05-05-2013, 04:42 PM	#16
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 488	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat Still availible. Posted via Mobile Device __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791



Register or Log In To remove these advertisements.

05-05-2013, 05:33 PM	#17
spudly Registered User Join Date: Dec 2007 Location: Newark, CA Posts: 127	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat Interested, PM sent. Posted via Mobile Device

05-05-2013, 10:54 PM	#18
warbucket Registered User Join Date: Mar 2011 Location: Havertown Pa Posts: 392	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat I would be interested in the 72 3/4 ton dog dish caps if you wanted to sell the set.

05-06-2013, 12:50 AM	#19
dougo Registered User Join Date: Feb 2010 Location: Southern California Posts: 543	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat Nice wheels.... Bump Posted via Mobile Device __________________ Doug '72 GMC K2500 Suburban 4x4

05-06-2013, 10:10 PM	#20
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat Hi! i am interested in the 4x4 front hub cabs that fit the 16.5 rims , are they still for sale ? thanks

05-07-2013, 09:58 AM	#21
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 488	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat The 1972 4x4 set is not availible, I have a complete set of 73 4x4 3/4 ton caps ill sell if your interested? Posted via Mobile Device __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

05-07-2013, 08:18 PM	#22
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat Since this is a little old what's left here...Are the rims and caps still for sale or just caps? Thanks, Alan

05-07-2013, 09:20 PM	#23
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat what is the differance in the hub caps 1972 to 1973 ?

05-07-2013, 11:27 PM	#24
boonedogs72 Registered User Join Date: Apr 2005 Location: redding ca Posts: 1,438	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat How much for just the wheels??? What are they off? Posted via Mobile Device

05-08-2013, 09:48 PM	#25
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: 8x6.5 16.5x9.75 steel wheels fresh powdercoat Hi! will you sell just the front 4x4 hub caps? what is the price and condition on the 4x4 front hub caps only ? Are they the same hubcaps as in the picture? I already have hubcaps for the rear wheels. Thanks for your time

Register or Log In To remove these advertisements.