AC vent assembly instructions ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 09-01-2012, 09:55 AM

i am ready to put these together but i just want to double check with someone that i am doing this right , the vents are different on each side , which side faces out ? And is this how the felts go ?

Katrina/10 · 09-01-2012, 10:19 AM

I need to know this too!

**67cheby** · 09-01-2012, 10:47 AM

i just realized the vents are ROUND...they will flip either direction once installed ....DOPE !!!

RustyBucket · 09-01-2012, 11:02 AM

This site is PSYCHIC!!, yesterday afternoon I had the driver's outlet apart 'cause the duct hose had come off of the back of it. I was gonna post and ask if somebody had a good idea how to re-attach the hose to the back of the outlet.... like tryin' to stretch a gnat's a$$ over a coke bottle.... couldn't do it. Finally used duct tape... HA, first time I EVER used duct tape on a DUCT. ANYWAY, thought it was funny that I was thinking about A/C outlets and first post I look at is these pictures.

AirSpeed · 09-01-2012, 11:18 AM

You have the felt strips in correctly, you have to trim the length of course. I've always wondered which side of the ball faces out as well, I ended up having the simple side out. Are you going to paint them? If so I would not assemble them until you paint unless paint is a ways down the road.
Posted via Mobile Device

**67cheby** · 09-01-2012, 11:19 AM

Quote:

Originally Posted by AirSpeed

You have the felt strips in correctly, you have to trim the length of course. I've always wondered which side of the ball faces out as well, I ended up having the simple side out. Are you going to paint them? If so I would not assemble them until you paint unless paint is a ways down the road.
Posted via Mobile Device

thanks , and yes just had them painted, that is the color of the truck

**67cheby** · 09-01-2012, 11:18 AM

lol, i just put one of them together and that vent ball is SUPER TIGHT everytime i try to move the vent ball it pop the vent apart ??

jjzepplin · 09-01-2012, 11:27 AM

Mine does not have the felt on the black hose connector. Just on the front painted piece. They seem to hold in place well and do not pop it apart.
I ran the angled side outward thinking being that the air coming to the vent would have to work harder to go around the angles when inside the vent.
Can't really notice much difference though.
Will check again when all is hooked back up.
Painting them today and reinstalling complete hose system.

jjzepplin · 09-02-2012, 07:24 AM

Quote:

Originally Posted by jjzepplin

Mine does not have the felt on the black hose connector. Just on the front painted piece. They seem to hold in place well and do not pop it apart.
I ran the angled side outward thinking being that the air coming to the vent would have to work harder to go around the angles when inside the vent.
Can't really notice much difference though.
Will check again when all is hooked back up.
Painting them today and reinstalling complete hose system.

I have to change that. They have felt on them. They should be a little hard to turn til they wear in.
The vent above the radio has the angled side outward so this is how I put my round units.

bollybib · 09-02-2012, 09:19 AM

The theory is that the angled side out diffuses the air flow and the straight side out provides direct flow. Turning them sideways shuts off all air flow.

**67cheby** · 09-01-2012, 11:59 AM

here they are assembled

Katrina/10 · 09-01-2012, 12:04 PM

I put felt strips on both sides and the balls are hard to turn. Not sure which side is supposed to face out, they are different.

09-01-2012, 09:55 AM	#1
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	AC vent assembly instructions ? i am ready to put these together but i just want to double check with someone that i am doing this right , the vents are different on each side , which side faces out ? And is this how the felts go ? Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-01-2012, 10:19 AM	#2
Katrina/10 Registered User Join Date: Oct 2010 Location: Ocean Springs, MS Posts: 1,746	Re: AC vent assembly instructions ? I need to know this too! __________________ Gary 1971 Chevrolet C/10 1951 GMC 100 1977 GMC C15 1955 Chevrolet 3100

09-01-2012, 10:47 AM	#3
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: AC vent assembly instructions ? i just realized the vents are ROUND...they will flip either direction once installed ....DOPE !!! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-01-2012, 11:02 AM	#4
RustyBucket Registered User Join Date: Jul 2009 Location: Space Coast, Fl. Posts: 1,055	Re: AC vent assembly instructions ? This site is PSYCHIC!!, yesterday afternoon I had the driver's outlet apart 'cause the duct hose had come off of the back of it. I was gonna post and ask if somebody had a good idea how to re-attach the hose to the back of the outlet.... like tryin' to stretch a gnat's a$$ over a coke bottle.... couldn't do it. Finally used duct tape... HA, first time I EVER used duct tape on a DUCT. ANYWAY, thought it was funny that I was thinking about A/C outlets and first post I look at is these pictures. __________________ Dad always said, "Son, WISH IN ONE HAND, and ......." -------------------------------------- -------------------------------------- Current toy trucks: '71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C '72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these: '66 Plymouth Belvedere City of Miami cop car clone. '70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!! '67 C10 short/step side mount spare -- SOLD!! '72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!! '69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!

09-01-2012, 11:18 AM	#5
AirSpeed Registered User Join Date: Jul 2007 Location: Fall River California Posts: 2,026	Re: AC vent assembly instructions ? You have the felt strips in correctly, you have to trim the length of course. I've always wondered which side of the ball faces out as well, I ended up having the simple side out. Are you going to paint them? If so I would not assemble them until you paint unless paint is a ways down the road. Posted via Mobile Device __________________ http://smg.photobucket.com/albums/v655/aaronhero/

09-01-2012, 11:27 AM	#8
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: AC vent assembly instructions ? Mine does not have the felt on the black hose connector. Just on the front painted piece. They seem to hold in place well and do not pop it apart. I ran the angled side outward thinking being that the air coming to the vent would have to work harder to go around the angles when inside the vent. Can't really notice much difference though. Will check again when all is hooked back up. Painting them today and reinstalling complete hose system. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

09-02-2012, 09:19 AM	#10
bollybib Registered User Join Date: Nov 2010 Location: Carlsbad, CA Posts: 1,584	Re: AC vent assembly instructions ? The theory is that the angled side out diffuses the air flow and the straight side out provides direct flow. Turning them sideways shuts off all air flow. __________________ - Jim - My Daily Driver is a 1969 Chevrolet Custom/20 Fleetside 350/TH400/Eaton H052 4.10 and its Project thread is here http://67-72chevytrucks.com/vboard/s...d.php?t=456911

09-01-2012, 11:59 AM	#11
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: AC vent assembly instructions ? here they are assembled Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-01-2012, 12:04 PM	#12
Katrina/10 Registered User Join Date: Oct 2010 Location: Ocean Springs, MS Posts: 1,746	Re: AC vent assembly instructions ? I put felt strips on both sides and the balls are hard to turn. Not sure which side is supposed to face out, they are different. __________________ Gary 1971 Chevrolet C/10 1951 GMC 100 1977 GMC C15 1955 Chevrolet 3100



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.