MN 16.5 stock wheel bonanza! All widths. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 09-09-2012, 05:56 PM

All appear fine other than needing clean up and paint.
Set of 4 16.5x6.75 8 lug $40 SOLD
Set of 4 16.5x9.75 with spring clips 8 lug $200
Pair of 16.5x8.25 6 lug $40 SOLD
single 16.5x9.75 8 lug SOLD
Another single 16.5x9.75 8 lug different offset, $30
single 16.5x9.75 6 lug $30
Shipping will be paid by buyer and determined by location. These are not light. If someone close wants them all, $300

**too much stuff** · 09-09-2012, 05:59 PM

More pics...

Vintage Windmills · 09-09-2012, 07:26 PM

Eric, any wide spoke wheels (wagon wheels) in 16.5? I have 2 and they are lonely without their other two siblings

**too much stuff** · 09-09-2012, 09:32 PM

Jud, can't help you there. This is all i have for 16.5 wheels.

Vintage Windmills · 09-09-2012, 10:22 PM

Eric,

Would these accept the 3/4 ton 69-72 dog dishes?

Set of 4 16.5x9.75 with spring clips 8 lug $200

CG · 09-10-2012, 12:35 AM

...

**Ridgeback** · 09-10-2012, 02:56 AM

too much stuff:

Will all the wheels listed below accept dog dish hub caps? If so can I get a shipping cost to 22727. Thanks.

Pair of 16.5x8.25 6 lug $40
single 16.5x9.75 8 lug $30
Another single 16.5x9.75 8 lug different offset, $30
single 16.5x9.75 6 lug $30

**too much stuff** · 09-11-2012, 09:16 AM

Quote:

Originally Posted by Ridgeback

too much stuff:

Will all the wheels listed below accept dog dish hub caps? If so can I get a shipping cost to 22727. Thanks.

Pair of 16.5x8.25 6 lug $40
single 16.5x9.75 8 lug $30
Another single 16.5x9.75 8 lug different offset, $30
single 16.5x9.75 6 lug $30

These don't have the outer nubs for caps, they have spring clips or inner nubs.
The 9.75 wheels are around 43 lbs. Shipping to residental is about $43. Might be a little cheaper to commercial. That is with ups with a suitcase tag. (no box)

**Ridgeback** · 09-11-2012, 02:08 PM

too much stuff

Thanks for you time with the quote. Unfortunately I need wheels that take dog dish caps. Thanks again.

**too much stuff** · 09-21-2012, 08:31 AM

Bump...

Mayo · 10-26-2012, 01:58 PM

So the set of four 16.5 x 9.75 use the 67-68 center caps?
Posted via Mobile Device

**too much stuff** · 10-26-2012, 03:50 PM

Quote:

Originally Posted by Mayo

So the set of four 16.5 x 9.75 use the 67-68 center caps?
Posted via Mobile Device

Correct, they have the spring clips for hubcaps.

Mayo · 10-27-2012, 10:53 AM

Do you know if those caps fit over a Dana 60 rear?
Posted via Mobile Device

**too much stuff** · 10-27-2012, 12:34 PM

Quote:

Originally Posted by Mayo

Do you know if those caps fit over a Dana 60 rear?
Posted via Mobile Device

I have no idea. Ask tim. (special k)

CORSAIR · 10-27-2012, 01:45 PM

Would you possable have a 16" x 6.5 6 lug wheel? trying to find one for my 72 K-5 project. They came as a option and missing one.

Thanks,
Fred

**too much stuff** · 10-27-2012, 02:41 PM

corsair, nothing on hand. I know where there is a set, but the guy won't let them go...

**special-K** · 10-28-2012, 06:33 AM

Quote:

Originally Posted by Mayo

Do you know if those caps fit over a Dana 60 rear?
Posted via Mobile Device

Yes. Dana 60s were used in 67/68,so the hubcaps were made to clear the hubs.

Mayo · 10-28-2012, 08:12 AM

Quote:

Originally Posted by special-K

Yes. Dana 60s were used in 67/68,so the hubcaps were made to clear the hubs.

Thanks for the info Tim, its really gonna make me think hard about these rims
Posted via Mobile Device

ChevySean79 · 11-11-2012, 12:02 PM

Any chance you have a 16.5x9.75 8 lug 5.5" backspace with the 4 outer nubs for the center cap? I could use 2 if you have.

Thanks,
Sean

**too much stuff** · 11-11-2012, 12:05 PM

Quote:

Originally Posted by ChevySean79

Any chance you have a 16.5x9.75 8 lug 5.5" backspace with the 4 outer nubs for the center cap? I could use 2 if you have.

Thanks,
Sean

Sorry, they have the spring clips for caps.

ChevySean79 · 11-11-2012, 01:10 PM

Oh ok thanks anyway
Posted via Mobile Device

CrewCab59 · 01-09-2013, 09:14 PM

what backspacing on the 2 singles 16.5 8lug ? looking for a spare wheel with 4 7/8. Any pics of the spring clips for $200?

Ship quote 37721

Scott

**too much stuff** · 01-10-2013, 12:13 AM

Quote:

Originally Posted by CrewCab59

what backspacing on the 2 singles 16.5 8lug ? looking for a spare wheel with 4 7/8. Any pics of the spring clips for $200?

Ship quote 37721

Scott

The single looks to be 4 3/4 and the other looks to be 5 3/4 measuring from the floor to the back of the wheel.
Spring clip wheels are in post 2, second and third pics.

CrewCab59 · 01-10-2013, 09:42 AM

I will take the 4 3/4 backspacing 16.5 8lug , let me know the total and your payment info.

Scott

Payment sent !

Thanks
Scott

rcm1958 · 01-10-2013, 12:02 PM

What do you have in the way of 6-lug rims?? I need 4 for my '67.

Reed

09-09-2012, 05:56 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	16.5 stock wheel bonanza! All widths. All appear fine other than needing clean up and paint. Set of 4 16.5x6.75 8 lug $40 SOLD Set of 4 16.5x9.75 with spring clips 8 lug $200 Pair of 16.5x8.25 6 lug $40 SOLD single 16.5x9.75 8 lug SOLD Another single 16.5x9.75 8 lug different offset, $30 single 16.5x9.75 6 lug $30 Shipping will be paid by buyer and determined by location. These are not light. If someone close wants them all, $300 Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto Last edited by too much stuff; 01-12-2013 at 02:18 PM.

09-09-2012, 05:59 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: 16.5 stock wheel bonanza! All widths. More pics... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-09-2012, 07:26 PM	#3
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 16.5 stock wheel bonanza! All widths. Eric, any wide spoke wheels (wagon wheels) in 16.5? I have 2 and they are lonely without their other two siblings __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

09-09-2012, 09:32 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: 16.5 stock wheel bonanza! All widths. Jud, can't help you there. This is all i have for 16.5 wheels. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-09-2012, 10:22 PM	#5
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 16.5 stock wheel bonanza! All widths. Eric, Would these accept the 3/4 ton 69-72 dog dishes? Set of 4 16.5x9.75 with spring clips 8 lug $200 __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

09-10-2012, 12:35 AM	#6
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,991	Re: 16.5 stock wheel bonanza! All widths. ... Attached Images __________________ … … … … … … … … ... … … … … … … … … … … …

09-10-2012, 02:56 AM	#7
Ridgeback Senior Member Join Date: Mar 2003 Location: Virginia Posts: 809	Re: 16.5 stock wheel bonanza! All widths. too much stuff: Will all the wheels listed below accept dog dish hub caps? If so can I get a shipping cost to 22727. Thanks. Pair of 16.5x8.25 6 lug $40 single 16.5x9.75 8 lug $30 Another single 16.5x9.75 8 lug different offset, $30 single 16.5x9.75 6 lug $30

09-11-2012, 02:08 PM	#9
Ridgeback Senior Member Join Date: Mar 2003 Location: Virginia Posts: 809	Re: 16.5 stock wheel bonanza! All widths. too much stuff Thanks for you time with the quote. Unfortunately I need wheels that take dog dish caps. Thanks again.

09-21-2012, 08:31 AM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: 16.5 stock wheel bonanza! All widths. Bump... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-26-2012, 01:58 PM	#11
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: 16.5 stock wheel bonanza! All widths. So the set of four 16.5 x 9.75 use the 67-68 center caps? Posted via Mobile Device __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

10-27-2012, 10:53 AM	#13
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: 16.5 stock wheel bonanza! All widths. Do you know if those caps fit over a Dana 60 rear? Posted via Mobile Device __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

10-27-2012, 01:45 PM	#15
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: 16.5 stock wheel bonanza! All widths. Would you possable have a 16" x 6.5 6 lug wheel? trying to find one for my 72 K-5 project. They came as a option and missing one. Thanks, Fred Attached Images __________________ "The Can't Family Lives Across The Street"

10-27-2012, 02:41 PM	#16
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: 16.5 stock wheel bonanza! All widths. corsair, nothing on hand. I know where there is a set, but the guy won't let them go... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-11-2012, 12:02 PM	#19
ChevySean79 Registered User Join Date: Dec 2010 Location: Lindenhurst NY Posts: 295	Re: 16.5 stock wheel bonanza! All widths. Any chance you have a 16.5x9.75 8 lug 5.5" backspace with the 4 outer nubs for the center cap? I could use 2 if you have. Thanks, Sean

11-11-2012, 01:10 PM	#21
ChevySean79 Registered User Join Date: Dec 2010 Location: Lindenhurst NY Posts: 295	Re: 16.5 stock wheel bonanza! All widths. Oh ok thanks anyway Posted via Mobile Device



Register or Log In To remove these advertisements.

01-09-2013, 09:14 PM	#22
CrewCab59 Registered User Join Date: Jul 2010 Location: Knoxville,TN Posts: 1,185	Re: 16.5 stock wheel bonanza! All widths. what backspacing on the 2 singles 16.5 8lug ? looking for a spare wheel with 4 7/8. Any pics of the spring clips for $200? Ship quote 37721 Scott __________________ 1972 Custom Deluxe 20 4x4 burb 1971 GMC SWB CST 4x4 1972 GMC k20 4x4 (X- brush truck ) 1971 Chevy CST Blazer 4x4 1971 Chevy C/10 1970 Cab Chassis C30 157" 1971 Cab Chassis Custom 30 Deluxe 157" 292/4spd ( Napco Replica ) 1988 Chevy V30 4x4 wrecker challenger 4812

01-10-2013, 09:42 AM	#24
CrewCab59 Registered User Join Date: Jul 2010 Location: Knoxville,TN Posts: 1,185	Re: 16.5 stock wheel bonanza! All widths. I will take the 4 3/4 backspacing 16.5 8lug , let me know the total and your payment info. Scott Payment sent ! Thanks Scott __________________ 1972 Custom Deluxe 20 4x4 burb 1971 GMC SWB CST 4x4 1972 GMC k20 4x4 (X- brush truck ) 1971 Chevy CST Blazer 4x4 1971 Chevy C/10 1970 Cab Chassis C30 157" 1971 Cab Chassis Custom 30 Deluxe 157" 292/4spd ( Napco Replica ) 1988 Chevy V30 4x4 wrecker challenger 4812 Last edited by CrewCab59; 01-10-2013 at 11:28 PM.

01-10-2013, 12:02 PM	#25
rcm1958 Registered User Join Date: Dec 2012 Location: Delray Beach, FL Posts: 56	Re: 16.5 stock wheel bonanza! All widths. What do you have in the way of 6-lug rims?? I need 4 for my '67. Reed

Register or Log In To remove these advertisements.