|
|
|
09-14-2012, 07:23 PM
|
#1 |
|
Registered User
Join Date: Jul 2012
Location: Branson Mo
Posts: 53
|
Beginner Question
The answer to my question is probably simple to everyone in this forum but me.
Where is the fuel filter on my 1986 GMC Sierra? It has the 5.7 V8. Thanks for babysitting me. Red Sierra |
|
|
|
09-14-2012, 07:49 PM
|
#2 |
|
Registered User
Join Date: Jul 2007
Location: Ontario Canada
Posts: 1,006
|
Re: Beginner Question
It is behind the big nut where the fuel line goes into the carb .
__________________
 1985 C10 2004 Avalanche |
|
|
|
|
09-14-2012, 08:10 PM
|
#3 |
|
Registered User
Join Date: Mar 2012
Location: San Antonio, Tx
Posts: 784
|
Re: Beginner Question
Or maybe inline with the gas line
__________________
San Antonio, TEXAS -Frog -I'm a valet and well I've driven BMWs, Mercedes, Porsche,Bentlys, fiats, Hondas, etc and well even do I like a few features, I love my shortbed, it dosent bore me out, just press on the gas and you'll remember why you love it. |
|
|
|
|
09-14-2012, 08:25 PM
|
#4 |
|
Account Suspended
Join Date: Dec 2008
Location: indisclosed
Posts: 1,515
|
Re: Beginner Question
The other thing is you need to be very careful when removing the line going into the nut. You need a flare wrench at the very least.
We'll try to get a picture up asap---if i may so bold to say that on behalf of everyone else 
|
|
|
|
|
09-14-2012, 10:22 PM
|
#5 |
|
Registered User
Join Date: Jul 2012
Location: Branson Mo
Posts: 53
|
Re: Beginner Question
Thanks everybody!!
RedSierra! Posted via Mobile Device |
|
|
|
|
09-16-2012, 07:35 AM
|
#6 |
|
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: Beginner Question
had to find one......junk yard pics
an inch wrench on the big one,hold, turn the small one watch as rusty lines let the "pipe"twist
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
|
|
|
|
09-16-2012, 04:53 PM
|
#7 |
|
Registered User
Join Date: Jul 2012
Location: Branson Mo
Posts: 53
|
Re: Beginner Question
MOTO, Thanks! Just picked up some flare wrenches and I'm ready to give it a shot.
Little backstory... This truck was the work truck for my dads company when I was a little boy. He has kept it around and has now has passed it to me to do what I want. It is a 1986 Sierra and has 48,000 original miles. I am 36 and have had 5 different operations over the last couple years due to work related injuries. Piddling with this truck has kept my mind busy and it has been a great source of therapy. Im super proud of it and will need you guys a lot over the next several months. Thanks For Putting Up With Me' RedSierra |
|
|
|
|
09-20-2012, 08:51 PM
|
#8 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,731
|
Re: Beginner Question
After you loosen and remove the fuel line from the filter housing you need to unscrew the housing. Go slow. It's fine threaded and prone to damage. THere's a small filter in there held in place by a spring. Be prepared for the filter and spring to pop out.
When you put it back together the spring goes first, then the filter with the open end pointed back towards the fuel line. There's a small flat washer that goes on the housing to seal it to the carb body. Screw it in gently and snug it up but not overly tight. Hook the fuel line up. Do not use any type of thread sealer on the housing threads or on the fuel line. Here's a good pic. http://www.superchevy.com/technical/.../photo_09.html |
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
