63 SWB C10 LT1/4L60E Swap

[Trsmotrhed]

I came across a great deal on an LT1 4L60E combo to install in my 63 swb truck. This is a budget build.
Finished my motor mounts for my LT1 swap into a 63 c10. Raised the motor 5/8" to help clear the AC instead of spending money on brackets. Worked great with all the room under the hood. I cut the stock mounts where they mount to engine and frame and filled in the gap with flat stock steel cut to fit.

Now to fit the headers and fuel lines. Waiting for my stand alone harness and ECM I got a killer deal on with VATS and smog deletes already done.

[jayman68]

Good job, you got it going.
Looks like a nice fit with the engine. Good luck on the build.

[Trsmotrhed]

Bolted up the headers from the 350. There was not much gasket difference between the D shape LT1 port and the standard 350 port. From what I've read they will work. I need to weld in the O2 bungs in the collectors next. I'll take pics as I progress.

[FRENCHBLUE72]

Welcome to the board good looking project.

[Bugeyev8]

by the looks of the engine w the green hoses it was a cop car engine?

[Trsmotrhed]

Originally Posted by Bugeyev8

by the looks of the engine w the green hoses it was a cop car engine?

Yes, it's a cop car LT1.
Posted via Mobile Device

[jayman68]

So far we have seen pics of the engine and the engine. Do you have any of the rest of the truck? The exhaust ports are pretty much the same. Looking good so far.

[Trsmotrhed]

Originally Posted by jayman68

So far we have seen pics of the engine and the engine. Do you have any of the rest of the truck? The exhaust ports are pretty much the same. Looking good so far.

I'm new here and haven't figured out how to add a pic to my signature. Until I do, here is a pic. So far lots of good info and cool guys on here. Sine this picture I have added PS, PB, disk brakes up front with 5 lug and also 5 lug on the rear from a 72 C10.

[jayman68]

Originally Posted by Trsmotrhed

I'm new here and haven't figured out how to add a pic to my signature. Until I do, here is a pic. So far lots of good info and cool guys on here. Sine this picture I have added PS, PB, disk brakes up front with 5 lug and also 5 lug on the rear from a 72 C10.

Cool! Looks pretty clean, just a spot of rust at the corner of the door.

[CRGRS 66]

Nice truck! Welcome to the board!

[Trsmotrhed]

Originally Posted by CRGRS 66

Nice truck! Welcome to the board!

Thanks. Already getting some great on my build from guys that have been there done that.
Posted via Mobile Device

[Trsmotrhed]

Posted via Mobile Device

[Trsmotrhed]

Got my harness and ECM the other day. Have a few wires to remove to clean it up. Still has all the smog connections and I need to add fuel pump relay and fuse block. At least I'll know what the harness has for wires when done.
Posted via Mobile Device

[Modges'66]

Welcome aboard!
I have the same combo in my chassis with a few upgrades.
Gonna be watching close to see your obstacles, as I haven't yet got to the point of hooking anything up, or messing with it.

[Trsmotrhed]

Originally Posted by Modges'66

Welcome aboard!
I have the same combo in my chassis with a few upgrades.
Gonna be watching close to see your obstacles, as I haven't yet got to the point of hooking anything up, or messing with it.

I'll be th Guinea pig. Lol. Do you have a build thread for your build? Would like to stay in touch as we both hit obstacles. After I get the harness straightened out, it's onto the fuel system. Think I'll get a suburban tank and weld in the top from a caprice or Z28 with a steel tank, another guy on thus site told me that's what he did. Option #2 is a fuel pump from Tanks Inc with a baffle and put in a Suburban tank.
Stay in touch.
Tim.
Posted via Mobile Device

[Modges'66]

I'm not sure how to attach a link to my build thread, but it shouldn't be hard to find if you look for my dumb avitar or user name but I will try to attach it now.

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

[Modges'66]

Ha!
It looks like I attached it manually & automatically at the same time!
I shouldn't be hard to find me now!

[Trsmotrhed]

Originally Posted by Modges'66

Ha!
It looks like I attached it manually & automatically at the same time!
I shouldn't be hard to find me now!

You did great. I found your build and looks awesome. I had a 66 C10 years ago and was actually looking for another one when I found this 63 really cheap. My 66 had a 383 Stroker built. Was a blast to drive and race at drag strip and smoke the cars. Miss it. Can't wait to get my LT1 fired up. I'm sure I'll do some mods. Stay in touch. Tim
Posted via Mobile Device

[Trsmotrhed]

Been busy at work and not much time for truck. I got my new radiator this week and installed today. Waiting on a stand alone harness now. The one I had bought was and mess and gave up. Went ahead and ordered a new one from tech rods on ebay. The radiator is a champion aluminum one from ebay also. Very impressed with the quality welds. Darn phone won't upload pic. I'll log in and post pic.

[Trsmotrhed]

Originally Posted by Trsmotrhed

Been busy at work and not much time for truck. I got my new radiator this week and installed today. Waiting on a stand alone harness now. The one I had bought was and mess and gave up. Went ahead and ordered a new one from tech rods on ebay. The radiator is a champion aluminum one from ebay also. Very impressed with the quality welds. Darn phone won't upload pic. I'll log in and post pic.

Attached Picture. Check out the new LT1 Plate on throttle body.

[McMurphy]

Hello and to the boards !!!

If you want to see a really awesome LS install build please check out this thread:

http://67-72chevytrucks.com/vboard/s...light=mesquite

He has done an incredible job on his, and there may be some info there that you will find helpful !!

Good luck, always good to see another of these rigs getting the time and attention they deserve.
Sheesh talk about survivors of the road !!

[jimmydean]

Nice work.

If I buy back my totalled Vette I will be doing the same combo.

[88Lt1wagon]

Looking clean, I've still got wires all over the place in my wagon and I've been driving it daily for almost a year...

[Trsmotrhed]

Originally Posted by 88Lt1wagon

Looking clean, I've still got wires all over the place in my wagon and I've been driving it daily for almost a year...

It's kinda fun driving them. I have the bed off mine and get the weirdest looks when driving. I love how my truck runs. Thank for looking and your comments. I'll look at yours.
Posted via Mobile Device

[88Lt1wagon]

I haven't done anything of note to the '66 yet, but here's a little documentation on my LT1

http://youtu.be/2WKq61_O49w

I'm not sure what I want to do with my C10, a 350 that looks like a 283, or an LS based motor. It almost got my LT1, but when my wagon's 307's head gasket started leaking, that was that.