PA WTB oem throttle cable - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jaros44sr** · 09-27-2012, 12:50 PM

i need the part of the throttle cable that clips into the square hole in the firewall, so i can adapt a lokar throttle cable

I hate to cut up an NOS cable, just to get the square firewall mount...

Any help out there? LMK! Thanks

**D.PASSMORE** · 09-27-2012, 01:44 PM

Shot me your addy and 5 bucks or a USPS Priority shipping label and I'll send you one for a 4x4. FRRREEEEE!

**RenoKeene** · 09-27-2012, 02:49 PM

Dave beat me to it. If anyone else needs one for the same reason let me know.

**jaros44sr** · 09-27-2012, 03:38 PM

Quote:

Originally Posted by D.PASSMORE

Shot me your addy and 5 bucks or a USPS Priority shipping label and I'll send you one for a 4x4. FRRREEEEE!

Sweet! Thanks for the help guys...can i send you five bucks via paypal

Anyone need an nos cable, shroud is about 6 1/4" long

**D.PASSMORE** · 09-27-2012, 03:40 PM

Quote:

Originally Posted by jaros44sr

Sweet! Thanks for the help guys...can i send you five bucks via paypal

Anyone need an nos cable, shroud is about 6 1/4" long

If its for a 4x4, sure. Let me measure mine. Does the cable wrapper have a GM # on it?

**jaros44sr** · 09-27-2012, 03:44 PM

Quote:

Originally Posted by D.PASSMORE

If its for a 4x4, sure. Let me measure mine. Does the cable have a GM on it?

Dont know about GM, but i can give you the numbers off of it. I might still have the GM wrapper
Thanks for the speedy reply, and will check tomorrow

**Classic Bowties** · 09-27-2012, 04:14 PM

Quote:

Originally Posted by D.PASSMORE

If its for a 4x4, sure. Let me measure mine. Does the cable have a GM on it?

Quote:

Originally Posted by jaros44sr

Dont know about GM, but i can give you the numbers off of it. I might still have the GM wrapper
Thanks for the speedy reply, and will check tomorrow

Just an FYI for iding purposes, all 71/72 4wd with a V8 & 4 bbl used GM Pn. 6264974 which was around 18" +/- overall with the black outer insulator part measuring 7 1/2" +/- from firewall mounting to carb bracket mounting points. Mel

hotrodimpy · 09-28-2012, 07:30 AM

FYI Lokar also has a bezel washer for this purpose. Part #1031 it is 1" in diameter and has a small bevel on it's face for some style. One on each side of the firewall will take care of covering the hole.

**jaros44sr** · 09-28-2012, 11:52 AM

Quote:

Originally Posted by hotrodimpy

FYI Lokar also has a bezel washer for this purpose. Part #1031 it is 1" in diameter and has a small bevel on it's face for some style. One on each side of the firewall will take care of covering the hole.

Just what i need more Lokar parts, J/K, all the parts i have bought have added well engineered proformance to my build, and good looks
Floor shifter w/optics for gear selection
Trans dipstick
Engine dipstick
Kickdown cable for th350
Throttle cable
2 Brake handles
Trans lever, connects linkage to shifter
And a very large decal for my tool box

That is avery good company, with great customer service and tech advise. And, its all American made....good quality parts, thanks for helping us out
Plus on time delivery, just had the cable drop shipped
Ill look up that part number, that would be one way to put a round peg in a square hole
Great board we have here

BTW! Have you ever thought about making cables for our heater controls, these solid cables in our trucks stick. I think those cables are what keep breaking the control panels

Thanks again for your help...check out my build thread with all your parts installed

**jaros44sr** · 09-28-2012, 12:08 PM

The nos oem cable measures a total assembly length of 18 3/4". Part number printed on cable is 4 120. Tape on cable says DH....

**D.PASSMORE** · 09-28-2012, 12:59 PM

I'm sending yours out in the morning, priority mail. Let me check the one I have.
Posted via Mobile Device

**jaros44sr** · 09-28-2012, 03:33 PM

Quote:

Originally Posted by D.PASSMORE

I'm sending yours out in the morning, priority mail. Let me check the one I have.
Posted via Mobile Device

Thank you very much....pm me your shipping addy, and ill get a pmo off to you

**D.PASSMORE** · 09-29-2012, 08:44 AM

I'll take the cable, shoot me your PP info.

**jaros44sr** · 09-29-2012, 11:52 AM

Quote:

Originally Posted by D.PASSMORE

I'll take the cable, shoot me your PP info.

David, before i sell you the cable, i want to tell you about it. I had a problem mounting it to a 72 pedal assembly, couldnt figure out how to get it through the hole in the pedal, so i cut a slot, the size of the cable, in the pedal to mount the cable to the pedal

Dont know if there is another way, but, just wanted to advise you of the situation....no damage to the oem cable

**jaros44sr** · 10-03-2012, 10:23 AM

David, just received your throttle cable, thank you

Good news, my oem nos cable is exactly like yours. Still want it?

**D.PASSMORE** · 10-03-2012, 10:27 AM

Yes.

**jaros44sr** · 10-03-2012, 12:29 PM

Quote:

Originally Posted by D.PASSMORE

Yes.

How about 20.00, and well call this deal closed. Ive deducted the 5.00 youve paid for shipping the original cable

**D.PASSMORE** · 10-03-2012, 04:02 PM

PP tomorrow.

09-27-2012, 01:44 PM	#2
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: WTB oem throttle cable Shot me your addy and 5 bucks or a USPS Priority shipping label and I'll send you one for a 4x4. FRRREEEEE! __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

09-27-2012, 02:49 PM	#3
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,025	Re: WTB oem throttle cable Dave beat me to it. If anyone else needs one for the same reason let me know. __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

09-28-2012, 07:30 AM	#8
hotrodimpy Registered User Join Date: May 2010 Location: Knoxville TN Posts: 120	Re: WTB oem throttle cable FYI Lokar also has a bezel washer for this purpose. Part #1031 it is 1" in diameter and has a small bevel on it's face for some style. One on each side of the firewall will take care of covering the hole.

09-28-2012, 12:59 PM	#11
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: WTB oem throttle cable I'm sending yours out in the morning, priority mail. Let me check the one I have. Posted via Mobile Device __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

09-29-2012, 08:44 AM	#13
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: WTB oem throttle cable I'll take the cable, shoot me your PP info. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

09-27-2012, 12:50 PM	#1
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,503	WTB oem throttle cable i need the part of the throttle cable that clips into the square hole in the firewall, so i can adapt a lokar throttle cable I hate to cut up an NOS cable, just to get the square firewall mount... Any help out there? LMK! Thanks __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

09-28-2012, 12:08 PM	#10
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,503	Re: WTB oem throttle cable The nos oem cable measures a total assembly length of 18 3/4". Part number printed on cable is 4 120. Tape on cable says DH.... __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

10-03-2012, 10:23 AM	#15
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,503	Re: WTB oem throttle cable David, just received your throttle cable, thank you Good news, my oem nos cable is exactly like yours. Still want it? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

10-03-2012, 10:27 AM	#16
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: WTB oem throttle cable Yes. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

10-03-2012, 04:02 PM	#18
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: WTB oem throttle cable PP tomorrow.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.