Anyone use eshocks.com? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

suspect · 09-29-2012, 11:25 PM

Does anyone have opinions on this site? Any bad deals? They're offering 4 bilstein front/rear shocks for a c10 for $264, free shipping. I would like to take them up on this deal.

http://www.eshocks.com/bil_Ind.asp?VC=4Q81&SubChar=Q

Do we have any vendors offering deals like this?

Thanks.

gringoloco · 09-30-2012, 12:43 AM

Bought my Billys through them- great service, fast shipping, good product, and the best prices I could find. If there's a supporting vendor that can do all that and price match, go with them--otherwise, e-shocks was good to me...
Posted via Mobile Device

suspect · 09-30-2012, 09:45 AM

thanks. I'm all about using our vendors first, but this deal is to good to pass up.

suspect · 10-04-2012, 06:52 PM

I ordered these 4 days ago online. I didn't have any issues. They also provided a tracking number, so that's a plus.

24-192941 are the fronts.

Also, thanks to lolife99. A couple months ago I asked a question about finding some other bilsteins, and he pointed out eshocks.com.

shawno72 · 10-04-2012, 07:22 PM

Are those the part numbers for front and rear 2wd coil spring by chance?

gringoloco · 10-04-2012, 09:27 PM

Yes, those are the correct numbers.

shawno72 · 10-04-2012, 09:48 PM

Will those work on a 5/7 drop

Posted via Mobile Device

gringoloco · 10-04-2012, 11:44 PM

Maybe. They are slightly longer compressed than stock replacement Monroes. I have them ready to install on a similar drop, but will be relocating the upper mounts both front and rear to ensure they won't bottom out and are near the middle of their stroke at ride height.
Posted via Mobile Device

suspect · 10-05-2012, 06:37 AM

The fronts are 15 1/2" extended - 10 1/2" compressed
rears are 18 1/2" extended - 12 1/2" compressed

I measured these with a tape measure while I compressed them, so they're not exact but a close idea. I may come up with exact measurements in my build once I get to making the relocation pieces.

I'm real happy with the travel these have. I'm running re7 bags front/rear. Tomorrow I'm going to start on building my front shock relocation mounts.
Then I'll check out SCOTI's post on doing the rear relocation and see if that's going to work for me.
I think these will work on a 5/7 truck. If you don't already have them, you can always mount the relocations. They should be a snap to make also.

09-29-2012, 11:25 PM	#1
suspect Registered User Join Date: Jul 2011 Location: oklahoma city Posts: 692	Anyone use eshocks.com? Does anyone have opinions on this site? Any bad deals? They're offering 4 bilstein front/rear shocks for a c10 for $264, free shipping. I would like to take them up on this deal. http://www.eshocks.com/bil_Ind.asp?VC=4Q81&SubChar=Q Do we have any vendors offering deals like this? Thanks. __________________ Daniel 68 C10 Build http://67-72chevytrucks.com/vboard/s...d.php?t=503594 Romans 10:13 Everyone who calls on the name of the Lord will be saved.

09-30-2012, 12:43 AM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Anyone use eshocks.com? Bought my Billys through them- great service, fast shipping, good product, and the best prices I could find. If there's a supporting vendor that can do all that and price match, go with them--otherwise, e-shocks was good to me... Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

09-30-2012, 09:45 AM	#3
suspect Registered User Join Date: Jul 2011 Location: oklahoma city Posts: 692	Re: Anyone use eshocks.com? thanks. I'm all about using our vendors first, but this deal is to good to pass up. __________________ Daniel 68 C10 Build http://67-72chevytrucks.com/vboard/s...d.php?t=503594 Romans 10:13 Everyone who calls on the name of the Lord will be saved.

10-04-2012, 06:52 PM	#4
suspect Registered User Join Date: Jul 2011 Location: oklahoma city Posts: 692	Re: Anyone use eshocks.com? I ordered these 4 days ago online. I didn't have any issues. They also provided a tracking number, so that's a plus. 24-192941 are the fronts. Also, thanks to lolife99. A couple months ago I asked a question about finding some other bilsteins, and he pointed out eshocks.com. Attached Images __________________ Daniel 68 C10 Build http://67-72chevytrucks.com/vboard/s...d.php?t=503594 Romans 10:13 Everyone who calls on the name of the Lord will be saved.

10-04-2012, 07:22 PM	#5
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Anyone use eshocks.com? Are those the part numbers for front and rear 2wd coil spring by chance? __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

10-04-2012, 09:27 PM	#6
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Anyone use eshocks.com? Yes, those are the correct numbers. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-04-2012, 09:48 PM	#7
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Anyone use eshocks.com? Will those work on a 5/7 drop Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

10-04-2012, 11:44 PM	#8
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Anyone use eshocks.com? Maybe. They are slightly longer compressed than stock replacement Monroes. I have them ready to install on a similar drop, but will be relocating the upper mounts both front and rear to ensure they won't bottom out and are near the middle of their stroke at ride height. Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-05-2012, 06:37 AM	#9
suspect Registered User Join Date: Jul 2011 Location: oklahoma city Posts: 692	Re: Anyone use eshocks.com? The fronts are 15 1/2" extended - 10 1/2" compressed rears are 18 1/2" extended - 12 1/2" compressed I measured these with a tape measure while I compressed them, so they're not exact but a close idea. I may come up with exact measurements in my build once I get to making the relocation pieces. I'm real happy with the travel these have. I'm running re7 bags front/rear. Tomorrow I'm going to start on building my front shock relocation mounts. Then I'll check out SCOTI's post on doing the rear relocation and see if that's going to work for me. I think these will work on a 5/7 truck. If you don't already have them, you can always mount the relocations. They should be a snap to make also. __________________ Daniel 68 C10 Build http://67-72chevytrucks.com/vboard/s...d.php?t=503594 Romans 10:13 Everyone who calls on the name of the Lord will be saved. Last edited by suspect; 10-06-2012 at 11:30 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.