Firewall Question reguarding 72 e brake mounting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cpetersen · 09-30-2012, 11:15 AM

Does anybody have pictures of the way a 72 ebrake is mounted to the firewall? Both in the cab and out. The holes are not there in the 68. I have to make sure in put it in the right spot. I'm converting my 68 to a 72 set up. I have a complete set up including the right ebrake cable. It would be nice to get the handle out from under the dash. Thanks

dfwright · 10-02-2012, 02:50 PM

I am not sure the pictures I took will help much, but here's what I have. If you need better, I could go grab the E-brake pedal assy and hold it up to the spot on the cab where it goes and take a picture of that for you.

Lee H · 10-02-2012, 05:00 PM

Here's a few.

cpetersen · 10-02-2012, 06:51 PM

Thanks guys good pictures just what i needed.

54belair · 10-02-2012, 08:04 PM

You might have an issue with depth---

The 68 firewall is 1/2" shallower than the 72----look at the pics and notice the raised sectiopn where the e brake bolts (circles in red) This difference might make it difficult to bolt it to the dash inside the truck.

Keep us posted----I have a 68 (and a 72 e brake that I might use---just njot there yet.)

09-30-2012, 11:15 AM	#1
cpetersen Registered User Join Date: Feb 2010 Location: mesa az Posts: 211	Firewall Question reguarding 72 e brake mounting Does anybody have pictures of the way a 72 ebrake is mounted to the firewall? Both in the cab and out. The holes are not there in the 68. I have to make sure in put it in the right spot. I'm converting my 68 to a 72 set up. I have a complete set up including the right ebrake cable. It would be nice to get the handle out from under the dash. Thanks

10-02-2012, 02:50 PM	#2
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,374	Re: Firewall Question reguarding 72 e brake mounting I am not sure the pictures I took will help much, but here's what I have. If you need better, I could go grab the E-brake pedal assy and hold it up to the spot on the cab where it goes and take a picture of that for you. Attached Images __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

10-02-2012, 05:00 PM	#3
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: Firewall Question reguarding 72 e brake mounting Here's a few. Attached Images __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

10-02-2012, 06:51 PM	#4
cpetersen Registered User Join Date: Feb 2010 Location: mesa az Posts: 211	Re: Firewall Question reguarding 72 e brake mounting Thanks guys good pictures just what i needed.

10-02-2012, 08:04 PM	#5
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	Re: Firewall Question reguarding 72 e brake mounting You might have an issue with depth--- The 68 firewall is 1/2" shallower than the 72----look at the pics and notice the raised sectiopn where the e brake bolts (circles in red) This difference might make it difficult to bolt it to the dash inside the truck. Keep us posted----I have a 68 (and a 72 e brake that I might use---just njot there yet.) __________________ 1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.