![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Mar 2012
Location: Lawrence, Kansas
Posts: 78
|
![]()
Here she is!
more to come!
__________________
1970 C20, SM465, Eaton Ho52, HD coils, NO PB/PS/AC, 250 I6, Wood bed. All original minus a tune up! http://67-72chevytrucks.com/vboard/s...d.php?t=545486 Gentlemen wear a bow tie. |
![]() |
![]() |
![]() |
#2 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,518
|
Re: Big Six (finally uploaded pics!)
-
Hey! That's a cool workhorse. What are the plans for it... LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: Mar 2012
Location: Lawrence, Kansas
Posts: 78
|
Re: Big Six (finally uploaded pics!)
Quote:
This is over the next couple years, hopefully. (you know how projects go lol) Tentative Schedule.. Before winter: Get brakes done, (all 4 corners, replace 2 leaky wheel cylinders, master cylinder, pads, and resurface hubs if they need it). Freshen up my rear end and transmission by replacing that old "Dinosaur goo" with full synthetic gear oil. new axle seals. Spring 2013: Freshen up the front end. (I have been getting some unusual tire wear, I think my ball joints or wheel bearings could use a look over need a look over) Get some good shocks. Rear wheel bearings replaced as well. gotta get her rolling smooth as glass. Might even see if I can craigslist a swaybar Summer 2013: Rims and Rubber! No use in spending money on expensive new tires when you're front end is just going to eat them up, I want to get ahold of some 8 lug chrome h2 hummer wheels, grab some bowtie center caps for them, and some nice big load range E's with an efficient tread pattern Fall 2013: Temporary Small block swap, I need to get my straight 6 out so I can throw it up on a stand and start rebuilding it, I want to build it up for a small(ish) turbo charger Winter 2013: Wrenching on my engine, building it to specs, saving up for all of my bolt ons and stronger internals Spring 2014: interior work/trim piece hunting/ordering, misc body work Summer 2014: hoping to have my turbo-250 swap completed by them Fall 2014: possible drive train swap to increase fuel efficiency Winter 2014: Save up for paint/body work, pull her in to my friends barn and hoist the bed/cab off and do as much as I can 2015: PAAAAAAAAAAAAAAAAINT!!!
__________________
1970 C20, SM465, Eaton Ho52, HD coils, NO PB/PS/AC, 250 I6, Wood bed. All original minus a tune up! http://67-72chevytrucks.com/vboard/s...d.php?t=545486 Gentlemen wear a bow tie. |
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2012
Location: Lawrence, Kansas
Posts: 78
|
Re: Big Six (finally uploaded pics!)
not too bad for an old farm truck!
What's the story behind this? only rusted away part of the pickup one of the only rust spots on the whole truck this bumper means business! Get this.. forearm shaped rust spot on the inside.. Lots of long sweaty hours
__________________
1970 C20, SM465, Eaton Ho52, HD coils, NO PB/PS/AC, 250 I6, Wood bed. All original minus a tune up! http://67-72chevytrucks.com/vboard/s...d.php?t=545486 Gentlemen wear a bow tie. |
![]() |
![]() |
![]() |
#5 | |
Registered User
Join Date: Sep 2011
Location: Wildrose, North Dakota
Posts: 300
|
Re: Big Six (finally uploaded pics!)
Quote:
__________________
Dane 67 Chevy Fleet 250/4 speed 1/2 ton 68 Chevy 250/4 speed 1/2 ton for parts 49 GMC Grain truck 235 1 1/2 ton 76 Chevy 350/4 speed 1/2 ton |
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Mar 2012
Location: Lawrence, Kansas
Posts: 78
|
Re: Big Six (finally uploaded pics!)
all original glass!
Lil interior rust, not too bad I didn't know these things came with floor boards!? all things considering, pretty solid need to grab some weather stripping to prevent any more of this!
__________________
1970 C20, SM465, Eaton Ho52, HD coils, NO PB/PS/AC, 250 I6, Wood bed. All original minus a tune up! http://67-72chevytrucks.com/vboard/s...d.php?t=545486 Gentlemen wear a bow tie. |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Mar 2012
Location: Lawrence, Kansas
Posts: 78
|
Re: Big Six (finally uploaded pics!)
Interior! (Yes, I know my seat cover is on inside out.. did it for more horsepower..)
These were taken about a month or two after I bought it, Didn't even have 80k when I picked it up, did I mention those are all original? Worst stereo evarrrr... The air freshener came with the truck.. I liked it and haven't had to heart to get rid of it, she's too sexy lol Yes.. That is a tap-handle shift knob! picked that up at my local swap meet this summer, not a bad $3 and def adds a lot of character
__________________
1970 C20, SM465, Eaton Ho52, HD coils, NO PB/PS/AC, 250 I6, Wood bed. All original minus a tune up! http://67-72chevytrucks.com/vboard/s...d.php?t=545486 Gentlemen wear a bow tie. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Mar 2012
Location: Lawrence, Kansas
Posts: 78
|
Re: Big Six (finally uploaded pics!)
Got wood?
Creative patch work! I honestly think it looks pretty cool, kudos to you previous owner Most of the timber is actually very solid America.. **** yeah! NRA4LIFE
__________________
1970 C20, SM465, Eaton Ho52, HD coils, NO PB/PS/AC, 250 I6, Wood bed. All original minus a tune up! http://67-72chevytrucks.com/vboard/s...d.php?t=545486 Gentlemen wear a bow tie. |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Mar 2012
Location: Lawrence, Kansas
Posts: 78
|
Re: Big Six (finally uploaded pics!)
Engine bay!
Tune up time! New plugs/wires, fuel pump, carb rebuild, distributor/cap, air filter, coil, and oil change! Runs like a champ Split manifolds.. Bane of my existence So the truck had an exhaust leak when I bought it, no biggie, replace the manifold gasket and we're good as new, right? NO! That was one pain in the ass job, i've even asked long time mechanics about replacing those manifold gaskets and all the did was talk about how big of a pain they were. So, I replaced them, took way more beer than I thought it would.. Less than a month later I blow them out.. Need to replace them again before winter, this time I'm finding some one who knows what they're doing to help me
__________________
1970 C20, SM465, Eaton Ho52, HD coils, NO PB/PS/AC, 250 I6, Wood bed. All original minus a tune up! http://67-72chevytrucks.com/vboard/s...d.php?t=545486 Gentlemen wear a bow tie. |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Mar 2012
Location: Lawrence, Kansas
Posts: 78
|
Re: Big Six (finally uploaded pics!)
Newest work on the old girl..
Rebuilding the top end of my shifter! Gears all look good, should shift like new! here's some pics of the tear down things got a little greasy after I got the cover off and had to set the camera down Dirty girl!!!
__________________
1970 C20, SM465, Eaton Ho52, HD coils, NO PB/PS/AC, 250 I6, Wood bed. All original minus a tune up! http://67-72chevytrucks.com/vboard/s...d.php?t=545486 Gentlemen wear a bow tie. |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Mar 2012
Location: Lawrence, Kansas
Posts: 78
|
Re: Big Six (finally uploaded pics!)
I plan on owning this truck for the rest of my life, it will see many stages of evolution over the years with what will eventually end in a diesel swap (if i have the money and decide i don't want to stay somewhat original). I am going for something functional yet timelessly classic. Old truck reliability with modern styling. I want chrome in the appropriate places, LED side markers, LED tail lights, HID headlights, LED interior lights, LMC a cargo light. I want to keep the bench seat, for various reasons
![]() I still haven't decided if I want to go with the original color scheme (I do like the original blue on blue with white bumpers) But I have many ideas including: Cadillac pearl white with chrome and charcoal grey trim. Also, throwing some Cheyenne trim on it and sandwiching a vanilla ice cream off white between a darker shade of metallic green with chrome and wood trim.. I have a feeling I am goin to just murder it out until I have a couple thousand laying around for a nice paint job (for those of you who don't know, murdering out = flat black everything)
__________________
1970 C20, SM465, Eaton Ho52, HD coils, NO PB/PS/AC, 250 I6, Wood bed. All original minus a tune up! http://67-72chevytrucks.com/vboard/s...d.php?t=545486 Gentlemen wear a bow tie. |
![]() |
![]() |
![]() |
Bookmarks |
|
|