|
|
|
10-01-2012, 06:04 PM
|
#1 |
|
Registered User
Join Date: Aug 2012
Location: Neskowin OR
Posts: 1,153
|
Removing Door Panels
I have everything off my door panels removed (screws on the bottom, window / door cranks, armrest) but it looks like there are 3 screws at the top of the panel under the trim that are still holding it on???? I tried lifting up, rocking it back and forth (not hard of course), but it won't budge. I didn't want to pry up on that trim and ruin it. Any thoughts? I am trying to fix the linkage and regulators in the doors and can't get in there!
Thanks for any help in advance. 
|
|
|
|
10-01-2012, 06:32 PM
|
#2 |
|
member #16
 
Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Re: Removing Door Panels
The panel should pull straight down and out unless it has been recovered with a thicker material.
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors  http://www.flickr.com/photos/1745471...7602865984234/ |
|
|
|
|
10-01-2012, 06:53 PM
|
#3 |
|
Registered User
Join Date: Aug 2012
Location: Neskowin OR
Posts: 1,153
|
Re: Removing Door Panels
I tried pulling straight down too, with no luck. Yes, the panels have been recovered and are pretty thick. Guess I'll just pull harder! Thanks!
|
|
|
|
|
10-01-2012, 09:16 PM
|
#4 |
|
Registered User
Join Date: Jun 2012
Posts: 1,089
|
Re: Removing Door Panels
If they are metal door panels like mine (but have just been covered) they should just pull straight down unless the PO did something different to them.
|
|
|
|
 |
| Bookmarks |
|
|
<- My daughter loves this guy 8-)
Hybrid Mode
