GA WTB 69 Rear spring hangers

[Drewbee]

Hey,

I am in need of 69 rear spring hangers. I have the front, but the rear's are year specific. They are shorter than 71-72. I think even the 70's are slightly different. If someone has these it would make my day!

[Undone]

I have a set from a 69 gmc leaf spring rear. 45.00 shipped

[Drewbee]

Saweet! Do you have pictures?

[Undone]

I'll get you some tomorrow.

[Drewbee]

Thanks a bunch!

[mrdana60]

Make sure you say 4x4 also. Sorry the ones I sold you was wrong.

[Drewbee]

Good point thanks! And don't worry I'll finish cleaning the ones I bought from you and sell them on here. Someone will get a good set of rear spring hangers for 71-72.

[Drewbee]

If the 2wd is leaf springs....does it matter if its 2wd or 4wd? I do have a 4wd and looking to get this frame done.

[mrdana60]

2wd will be shorter. You could use them but you would need lift to take up slack from the shorter hangers. The 4wd hang down past the frame where a 2wd is closer to the frame.

[Drewbee]

Then I definitely need 4x4.. I may have to start a new thread to add that in the title.

[Drewbee]

Evening bump...anybody got any 4x4 rear leaf spring hangers for a 69

[Drewbee]

late night bump

[Drewbee]

mid day bump.. still looking for 1969 4x4 rear spring hangers. These can be off a suburban, or a K5 as well.

Thanks

[Drewbee]

Nobody has these?
Posted via Mobile Device

[Jdubs71]

Originally Posted by Drewbee

Nobody has these?
Posted via Mobile Device

I had the same problem you did, 69 is one year only, 70 is one year only and 71 & 72 are the same. I have a 70 K5 and the frame is stamped in front of and behind the hanger to keep it from moving, see pic. As you can see the 71/72 hanger would not work for me. If your frame is flat where the hanger mounts you should consider using 71/72 hangers, much more solid. the holes are off but you can re-drill them to make it work. If your frame is like mine then you're screwed and will have to wait til someone comes along and can help. Unfortunately I became an expert in spring hangers (not by choice). Burb's, K5's and K10's all use the same hangers and 2wd and 4wd are different If your able to use 71/72 hangers by drilling new holes and you want to go that route let me know, I have a set that I bought before knowing what I know now about spring hangers.

[Blaster1420]

Originally Posted by Jdubs71

I had the same problem you did, 69 is one year only, 70 is one year only and 71 & 72 are the same. I have a 70 K5 and the frame is stamped in front of and behind the hanger to keep it from moving, see pic. As you can see the 71/72 hanger would not work for me. If your frame is flat where the hanger mounts you should consider using 71/72 hangers, much more solid. the holes are off but you can re-drill them to make it work. If your frame is like mine then you're screwed and will have to wait til someone comes along and can help. Unfortunately I became an expert in spring hangers (not by choice). Burb's, K5's and K10's all use the same hangers and 2wd and 4wd are different If your able to use 71/72 hangers by drilling new holes and you want to go that route let me know, I have a set that I bought before knowing what I know now about spring hangers.

Do you still have the 71-72 hangers?
Posted via Mobile Device

[Jdubs71]

Yeah I still have them I will pm you
Posted via Mobile Device

[Drewbee]

Thanks Jdubs,

I learned the hard way as well. But I'm going to keep looking for 69 set. Someone has to have a set.

Still looking

[Jdubs71]

Originally Posted by Drewbee

Thanks Jdubs,

I learned the hard way as well. But I'm going to keep looking for 69 set. Someone has to have a set.

Still looking

Good luck, they're out there just hard to find. They usually stay with the frame or get scraped. I never looked into earlier models, 67/68 might work for you I just don't know for sure.
Posted via Mobile Device

[Drewbee]

Bump to the top

[Drewbee]

afternoon bump

[Drewbee]

evening bump...69 4x4 rear spring hangers

[Jdubs71]

Saw this tonight. Good deal and you lucked out, because they don't come around often.

http://67-72chevytrucks.com/vboard/s...d.php?t=546133