couple 4x4 fab. questions.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mongoose · 10-19-2012, 12:26 PM

Trying to piece together a new truck and have a couple questions...

Front axle.. What is the proper angle for the shackle at ride height? Angled back or forwards...

And, does it matter if the shackle is on the front of the leaf? Trying to keep it as low as possible so I'm thinking I can gain an inch or more by having the shackle in the front..

Thanks.
Posted via Mobile Device

OLDCHEV4X4 · 10-19-2012, 03:21 PM

Not quite sure what your trying to do here, but... The stock springs in the front are negative arch and the shackle is angled back. Lift spring shackles are angled towards the front. I've never seen one with the shackle in the front of the spring, but Scouts and Jeeps do it that way, so it must be ok.
You could also do a slider instead of a shackle to keep the height down.

mongoose · 10-19-2012, 05:08 PM

Full size blazer drivetrain into a s10 blazer.. Bush/hunting rig.. But would rather not lift it a bunch to make it work.. Low CG build..
Posted via Mobile Device

10-19-2012, 12:26 PM	#1
mongoose Registered User Join Date: Feb 2009 Location: slurrey, bc. Posts: 1,134	couple 4x4 fab. questions.. Trying to piece together a new truck and have a couple questions... Front axle.. What is the proper angle for the shackle at ride height? Angled back or forwards... And, does it matter if the shackle is on the front of the leaf? Trying to keep it as low as possible so I'm thinking I can gain an inch or more by having the shackle in the front.. Thanks. Posted via Mobile Device __________________ -'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler.

10-19-2012, 03:21 PM	#2
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	Re: couple 4x4 fab. questions.. Not quite sure what your trying to do here, but... The stock springs in the front are negative arch and the shackle is angled back. Lift spring shackles are angled towards the front. I've never seen one with the shackle in the front of the spring, but Scouts and Jeeps do it that way, so it must be ok. You could also do a slider instead of a shackle to keep the height down. __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania

10-19-2012, 05:08 PM	#3
mongoose Registered User Join Date: Feb 2009 Location: slurrey, bc. Posts: 1,134	Re: couple 4x4 fab. questions.. Full size blazer drivetrain into a s10 blazer.. Bush/hunting rig.. But would rather not lift it a bunch to make it work.. Low CG build.. Posted via Mobile Device __________________ -'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.