Plastic grommet thingy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JORGIE95961 · 10-28-2012, 10:43 AM

I need to know where i can get the "grommet" that goes on the firewall for the ac flapper ie fresh air vent...Whats this thing officially called and who sells them..
this is not a want to buy add but i can understand why someone may take it that way.. please any infro is apprecieated

**Daddy Brim** · 10-28-2012, 10:51 AM

Are you looking for this ? https://www.classicparts.com/searchprods.asp

JORGIE95961 · 10-28-2012, 11:02 AM

Quote:

Originally Posted by Daddy Brim

Are you looking for this ? https://www.classicparts.com/searchprods.asp

i looked em up , cant find it but thanks

bowtiecharlie · 10-28-2012, 11:14 AM

I think lmc carries this in a complete seal kit try this link http://www.lmctruck.com/icatalog/cb/full.aspx?Page=118

JORGIE95961 · 10-28-2012, 11:21 AM

I bout the kit but this piece didnt come in it, or anywhere else.. just my luck

**FirstOwner69** · 10-28-2012, 12:10 PM

Are you asking about the white nylon piece that screws to the engine side of the firewall with 2 screws that the flapper shaft passes through? I'm not sure that piece is reproduced.

Here's a previous thread with pictures.
http://67-72chevytrucks.com/vboard/s...63#post5397163

JORGIE95961 · 10-28-2012, 12:33 PM

Quote:

Originally Posted by firstowner69

are you asking about the white nylon piece that screws to the engine side of the firewall with 2 screws that the flapper shaft passes through? I'm not sure that piece is reproduced.

Here's a previuous thread with pictures.
http://67-72chevytrucks.com/vboard/s...63#post5397163

yes!!

**FirstOwner69** · 10-28-2012, 12:41 PM

There were some trucks in my local junkyard with A/C. However, they have been pretty much picked over. I can look if you'd like. They'd probably give one to me at no cost, and I could pass those "savings" on to you.

rsavage · 10-28-2012, 07:20 PM

Post a WTB ad. There are lots of guys on here that part trucks. I am sure someone will have it for you.

**chewychevy67** · 10-31-2012, 12:38 AM

I may have one you can have. It would be at the shop. Ill be there tomorrow sometime so ill check.

**chewychevy67** · 11-01-2012, 05:05 PM

Is this what your looking for? If so PM me your mail address and ill mail it to you. Rod.

JORGIE95961 · 11-01-2012, 05:20 PM

THATS IT .. BUT am i alwed to accept this?

10-28-2012, 10:43 AM	#1
JORGIE95961 Registered User Join Date: Feb 2011 Location: OLIVEHURST CA Posts: 570	Plastic grommet thingy I need to know where i can get the "grommet" that goes on the firewall for the ac flapper ie fresh air vent...Whats this thing officially called and who sells them.. this is not a want to buy add but i can understand why someone may take it that way.. please any infro is apprecieated

10-28-2012, 10:51 AM	#2
Daddy Brim Senior Member Join Date: Feb 2011 Location: Clovis Ca. Posts: 632	Re: Plastic grommet thingy Are you looking for this ? https://www.classicparts.com/searchprods.asp __________________ I'm sorry I called you stupid. I thought you knew already. 67 C-20 Custom Camper 68 Nova 396 it does wheelies 2005 Buick Century the one the wife drives 1989 Toyota Tercel to drive when I can't put gas in the first 2.

10-28-2012, 11:14 AM	#4
bowtiecharlie Registered User Join Date: Jan 2012 Location: quinton,nj Posts: 28	Re: Plastic grommet thingy I think lmc carries this in a complete seal kit try this link http://www.lmctruck.com/icatalog/cb/full.aspx?Page=118 __________________

10-28-2012, 11:21 AM	#5
JORGIE95961 Registered User Join Date: Feb 2011 Location: OLIVEHURST CA Posts: 570	Re: Plastic grommet thingy I bout the kit but this piece didnt come in it, or anywhere else.. just my luck

10-28-2012, 12:10 PM	#6
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,852	Re: Plastic grommet thingy Are you asking about the white nylon piece that screws to the engine side of the firewall with 2 screws that the flapper shaft passes through? I'm not sure that piece is reproduced. Here's a previous thread with pictures. http://67-72chevytrucks.com/vboard/s...63#post5397163 Last edited by FirstOwner69; 10-28-2012 at 12:37 PM.

10-28-2012, 12:41 PM	#8
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,852	Re: Plastic grommet thingy There were some trucks in my local junkyard with A/C. However, they have been pretty much picked over. I can look if you'd like. They'd probably give one to me at no cost, and I could pass those "savings" on to you.

10-28-2012, 07:20 PM	#9
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Plastic grommet thingy Post a WTB ad. There are lots of guys on here that part trucks. I am sure someone will have it for you. __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

10-31-2012, 12:38 AM	#10
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,557	Re: Plastic grommet thingy I may have one you can have. It would be at the shop. Ill be there tomorrow sometime so ill check.

11-01-2012, 05:05 PM	#11
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,557	Re: Plastic grommet thingy Is this what your looking for? If so PM me your mail address and ill mail it to you. Rod. Attached Images

11-01-2012, 05:20 PM	#12
JORGIE95961 Registered User Join Date: Feb 2011 Location: OLIVEHURST CA Posts: 570	Re: Plastic grommet thingy THATS IT .. BUT am i alwed to accept this?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.