TX 1973 454 lwp complete front accesory drive pulleys brackets

[WIDESIDE72]

I pulled a 454 out of a 73 chevy truck but I am putting it in a 72 c10 and already have the Swp set up so I don't need the lwp set up.

I have all parts needed for ps, alt and wp. The truck originally had A/C, so it has the correct pulleys for AC, butthe brackets and compressor were removed before I got the truck.

This is a non hydro boost set up.

Here is what is included:

2 brackets and spacer to mount alt on pass side
Ps pump and brackets
Single groove upper wp pulley
3 groove lower pulley (I haven't pulled these but it looks like it is 2 pulleys stacked)

All bolts to mount everything above.

$200 shipped to lower 48 for everything above

I will include the used LWP and alternator for an additional $50 (mainly due to shipping weight)

I also have the stock cast iron intake manifold bare $75 shipped

Stock stamped steel vc's $50 shipped

stock cast iron exhaust manifolds, no cracks, exhaust pipe cut with torch approximately 8-10", flange bolts undisturbed $150 shipped

Aftermarket flex fan, spacer and bolts that positioned the fan 1/2 way out of the factory 4 row shroud $40 shipped (sorry the radiator and shroud are already sold)

I forgot to take a photo before I started taking it apart. I will post photos later tonight.