Anyone with a 700r4 column shift - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DoubleL · 11-08-2012, 10:40 PM

I currently have a cheap floor shift for my new 700r4 but would like to have a column shift. I was wondering if you could adapt a column from an auto truck of our years to accommodate the 4 gears? I am trying to stay period in my truck so I am trying to avoid newer columns.

TxRat · 11-08-2012, 11:12 PM

mine is hooked up to the original column. park and reverse line up with the indicator letters. From there it doesn't line up exactly.

DoubleL · 11-08-2012, 11:26 PM

Quote:

Originally Posted by TxRat

mine is hooked up to the original column. park and reverse line up with the indicator letters. From there it doesn't line up exactly.

Can you shift into the lower gears okay?

TxRat · 11-08-2012, 11:49 PM

Yes

LT1 Burb · 11-09-2012, 01:06 AM

I have a 72 tilt with a column and it works fine, used Lokar linkage from column to tranny.

kieth · 11-09-2012, 09:45 AM

I have no indicators for the gears on my 700r4, it is not a problem with a tach and by feel one can tell what gear the truck is in........I would try a stock shifter column, the shifter shaft and flat plates that move the shifter linkage would probably work.... has anyone done that. ??

**ChiefRocka** · 11-09-2012, 10:07 AM

A new chrome bezel and indicator lens is available to replace the stock PRNDL.

chevyguys · 11-09-2012, 11:28 AM

I have a stock 66 column and am using the Lokar rod linkage. I had to make one small bend to clear the firewall. The linkage is adjusted to it's longest length and just using the lower set screw. I also tacked the rod with a welder a few times to be sure it was solid. However, I don't think that was necessary. Park and drive line up, (drive is OD) and I am able to drop into 1st with no problem.

**Chevy Fleetside** · 11-10-2012, 12:15 PM

I got this column from a late 70's van. It was really a camper van and it even has a cruise control button if I decide to venture into that later on. It is a 3 speed tilt column and will shift the 700R4 easy. I had another in the truck for 4 years before scoring this one on a 25% off sale at pick and pull. Cost me a whole $28.

lil_sahara450r · 11-10-2012, 03:07 PM

I have a stock auto column waiting to replace the 3 speed column. Good to know it will all work out with it. Honestly though, even in your daily drivers, does anybody still look at the indicator?? I know I dont... One down is reverse, three down is drive... its all in the feel

11-08-2012, 10:40 PM	#1
DoubleL Registered User Join Date: Jun 2012 Location: Rathdrum, Idaho Posts: 305	Anyone with a 700r4 column shift I currently have a cheap floor shift for my new 700r4 but would like to have a column shift. I was wondering if you could adapt a column from an auto truck of our years to accommodate the 4 gears? I am trying to stay period in my truck so I am trying to avoid newer columns. __________________ My 1965 C-20 project https://67-72chevytrucks.com/vboard/...d.php?t=835095

11-08-2012, 11:12 PM	#2
TxRat Registered User Join Date: Dec 2010 Location: Beaumont Texas Posts: 190	Re: Anyone with a 700r4 column shift mine is hooked up to the original column. park and reverse line up with the indicator letters. From there it doesn't line up exactly.

11-08-2012, 11:49 PM	#4
TxRat Registered User Join Date: Dec 2010 Location: Beaumont Texas Posts: 190	Re: Anyone with a 700r4 column shift Yes

11-09-2012, 01:06 AM	#5
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: Anyone with a 700r4 column shift I have a 72 tilt with a column and it works fine, used Lokar linkage from column to tranny.

11-09-2012, 09:45 AM	#6
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: Anyone with a 700r4 column shift I have no indicators for the gears on my 700r4, it is not a problem with a tach and by feel one can tell what gear the truck is in........I would try a stock shifter column, the shifter shaft and flat plates that move the shifter linkage would probably work.... has anyone done that. ??

11-09-2012, 10:07 AM	#7
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Anyone with a 700r4 column shift A new chrome bezel and indicator lens is available to replace the stock PRNDL. __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

11-09-2012, 11:28 AM	#8
chevyguys I Got it BAD! Join Date: Jul 2009 Location: MESA, AZ Posts: 205	Re: Anyone with a 700r4 column shift I have a stock 66 column and am using the Lokar rod linkage. I had to make one small bend to clear the firewall. The linkage is adjusted to it's longest length and just using the lower set screw. I also tacked the rod with a welder a few times to be sure it was solid. However, I don't think that was necessary. Park and drive line up, (drive is OD) and I am able to drop into 1st with no problem. __________________ Build Thread: http://www.chevyguys.com

11-10-2012, 12:15 PM	#9
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,781	Re: Anyone with a 700r4 column shift I got this column from a late 70's van. It was really a camper van and it even has a cruise control button if I decide to venture into that later on. It is a 3 speed tilt column and will shift the 700R4 easy. I had another in the truck for 4 years before scoring this one on a 25% off sale at pick and pull. Cost me a whole $28. Attached Images __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

11-10-2012, 03:07 PM	#10
lil_sahara450r Registered User Join Date: Nov 2010 Location: Chickasha, OK Posts: 182	Re: Anyone with a 700r4 column shift I have a stock auto column waiting to replace the 3 speed column. Good to know it will all work out with it. Honestly though, even in your daily drivers, does anybody still look at the indicator?? I know I dont... One down is reverse, three down is drive... its all in the feel



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.