CA Bagged '63 SWB Frame/Chassis

[thekid54]

Air bagged SWB (short bed) chassis for 1960-1966 Chevy/GMC truck. Chassis has less than 4k miles on it and totally lays out. Frame is from a 1963 SWB, Z'd 3 inches, custom step notch and rear trailing arms with Slam Specialties RE7 front and rear. Front end is from a 1973-1987 chevy and has been fully rebuilt with Moog components (have all receipts). Will have cab mounts for a '63-'66 cab ('60-'62 mounts are shown in the photos and are not inlcuded). Can be sold with or without airbags. Shocks, panhard bar, gas tank, fuel line, rigid brake lines, and rear section of exhaust are included. The following items are *NOT* included: the supremes (for sale separately), rear end, drop spindles, and calipers. The stock spindles and a mockup rear end will be installed so it can be rolled on to your trailer. $2000 obo.









This is the truck it was under:

[62 short step]

I have a ? What fuel tank is that?

[thekid54]

It's a Mustang tank

[bk2life]

Originally Posted by thekid54

It's a Mustang tank

60s/70s/80s/90s/00s/10s?

[thekid54]

Originally Posted by bk2life

60s/70s/80s/90s/00s/10s?

Early 70s I believe.

[Rusty Wrenches]

Are you offering a different rear end to stick under it? Or would I have to bring mine?

[thekid54]

Originally Posted by Rusty Wrenches

Are you offering a different rear end to stick under it? Or would I have to bring mine?

There's a mock-up rearend under it now (50's Olds I believe) that will allow it to be rolled around or on to a trailer. I would recommend using your own rearend for final assembly.

[Bagood]

how many gallons is the tank?

[thekid54]

They come in three sizes/volumes, 16, 20, & 22 gallon. They will not drop right in between the frame rails. When I did my notch I widened the rear frame rails.

[Holmes Cycles]

Really liking the frame man, good luck on sale. I need it but dont have the dough to get it and get it to texas

.....and props if you built it in that closet you call a garage haha