Anybody running paddle shifter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cracksrubi · 11-19-2012, 12:30 PM

So m carb motor decided to eat some pistons and rods so I've started looking into a 6.2l/6l90e swap not gonna lie the video of v502s truck doing some doughnuts really concreted the choice enough rambling back to my question
Tci makes a kit for this tranny 6l90e and. Wanted to see if any body already has any experiance with this kit or others. Also any pics, advice or personal experiences appretiated.
Posted via Mobile Device

**Hart_Rod** · 11-19-2012, 03:57 PM

Quote:

Originally Posted by Cracksrubi

So m carb motor decided to eat some pistons and rods so I've started looking into a 6.2l/6l90e swap not gonna lie the video of v502s truck doing some doughnuts really concreted the choice enough rambling back to my question
Tci makes a kit for this tranny 6l90e and. Wanted to see if any body already has any experiance with this kit or others. Also any pics, advice or personal experiences appretiated.
Posted via Mobile Device

In. I've been wondering about the paddle shifters too. Where are you getting your 6.2?

Wasted Income · 11-19-2012, 04:23 PM

I'll be running a tap shift setup with my 4L80E and Megasquirt "megashift" module.

Planning to run this shifter and use the buttons for tap shifting.

Cracksrubi · 11-19-2012, 05:10 PM

Haven't found a good scource yet but I'm still in the parts collecting stage I'm open to any suggestions about vendors or setup. I'm thinking something like an art Carr or something simple and small in the floor or between the seat custom seat of course. Then ididit or flaming river brushed column with tci paddle shift with display and the no key setup from flaming river also all I need now is to either win the lotto or get this raise I've been promised
Posted via Mobile Device

mcmlxix · 11-22-2012, 02:19 AM

http://twistmachine.com/Paddle_Shifters.html

Cracksrubi · 11-22-2012, 05:22 PM

That is one sweet setup any pics of how you select PRND there was something I didn't like about there's I think it was no gear indicator but I like the look of those handles better
Posted via Mobile Device

**Hart_Rod** · 11-22-2012, 06:52 PM

Quote:

Originally Posted by Cracksrubi

That is one sweet setup any pics of how you select PRND there was something I didn't like about there's I think it was no gear indicator but I like the look of those handles better
Posted via Mobile Device

Dakota Digital sells a nice gear indicator setup.
Posted via Mobile Device

mcmlxix · 11-23-2012, 03:05 AM

You still need a mechanical gear shifter to get from Park to Drive and Reverse. (Floor shifter?) I believe the Dakota Digital gear indicator is indexed off the transmission shifter arm, so it will only show the gear you manually/physically put the trans into.... not the gear you select while using the paddle shifter.

The ECM/PCM should have the data from the trans to know what gear it's in at any given time. The problem is not all readers/controllers have a way to "export" that data to an indicator for the dash...

11-19-2012, 12:30 PM	#1
Cracksrubi Registered User Join Date: Oct 2012 Location: Hazel Green Al Posts: 54	Anybody running paddle shifter So m carb motor decided to eat some pistons and rods so I've started looking into a 6.2l/6l90e swap not gonna lie the video of v502s truck doing some doughnuts really concreted the choice enough rambling back to my question Tci makes a kit for this tranny 6l90e and. Wanted to see if any body already has any experiance with this kit or others. Also any pics, advice or personal experiences appretiated. Posted via Mobile Device __________________ 68 c-10 lwb

11-19-2012, 04:23 PM	#3
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: Anybody running paddle shifter I'll be running a tap shift setup with my 4L80E and Megasquirt "megashift" module. Planning to run this shifter and use the buttons for tap shifting. __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2016 Ford Explorer Sport - Twin Turbskis 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

11-19-2012, 05:10 PM	#4
Cracksrubi Registered User Join Date: Oct 2012 Location: Hazel Green Al Posts: 54	Re: Anybody running paddle shifter Haven't found a good scource yet but I'm still in the parts collecting stage I'm open to any suggestions about vendors or setup. I'm thinking something like an art Carr or something simple and small in the floor or between the seat custom seat of course. Then ididit or flaming river brushed column with tci paddle shift with display and the no key setup from flaming river also all I need now is to either win the lotto or get this raise I've been promised Posted via Mobile Device __________________ 68 c-10 lwb

11-22-2012, 02:19 AM	#5
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: Anybody running paddle shifter http://twistmachine.com/Paddle_Shifters.html __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE Last edited by mcmlxix; 11-22-2012 at 03:48 AM.

11-22-2012, 05:22 PM	#6
Cracksrubi Registered User Join Date: Oct 2012 Location: Hazel Green Al Posts: 54	Re: Anybody running paddle shifter That is one sweet setup any pics of how you select PRND there was something I didn't like about there's I think it was no gear indicator but I like the look of those handles better Posted via Mobile Device __________________ 68 c-10 lwb Last edited by Cracksrubi; 11-22-2012 at 05:32 PM. Reason: My phone was acting retarded

11-23-2012, 03:05 AM	#8
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: Anybody running paddle shifter You still need a mechanical gear shifter to get from Park to Drive and Reverse. (Floor shifter?) I believe the Dakota Digital gear indicator is indexed off the transmission shifter arm, so it will only show the gear you manually/physically put the trans into.... not the gear you select while using the paddle shifter. The ECM/PCM should have the data from the trans to know what gear it's in at any given time. The problem is not all readers/controllers have a way to "export" that data to an indicator for the dash... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.